LG DK379: Speaker Settings

Speaker Settings

Make the following settings for the built-in 5.1 channel

Distance

surround decoder.

If you connected speakers to your DVD Player, setting

the Distance lets the speakers know how far the sound

has to travel to reach your set listening point. This

allows the sound from each speaker to reach the listen-

er at the same time. (1 ft = 30.48 cm)

Test

Press SELECT/ENTER to test the signals of each

speaker. Adjust the volume to match the volume of test

OPERATION

signals memorized in the system.



Front Left (L) → Front Right (R) → Center

→ Rear Left (L) → Rear Right (R)

Select “5.1 Speaker Setup” using the

33

/

44

but-

11

Return

tons on the setup menu.

Press SELECT/ENTER to return to the previous menu.

While “5.1 Speaker Setup” is selected, press 2

22

button.

Press

11

/

22

buttons to select the desired speaker.

33

Adjust options by using

33 4411 22

buttons.

44

Speaker selection

Select a speaker that you want to adjust. (Front speak-

ers (Left), Front speakers (Right), Center Speaker, Rear

speakers (Left), Rear speakers (Right), or Subwoofer)

Note

Certain speaker settings are prohibited by the Dolby

Digital licensing agreement.

Volume

Press

11

/

22

to adjust the output level of the selected

speaker. (-10dB - 0dB)

Size



Press

11

/

22

to set a mode. (Large, Small or None)



If you have connected the system to a speaker with a

low frequency of 100Hz or below, select “Large.”



If you have connected the system to a speaker with-

out a low frequency of 100Hz or below, select

“Small.” If you have not connected a subwoofer,

always select “Large” for Front speaker (L/R).



When you do not have a certain speaker connected,

select “None.”



Front L/R speaker’s size can be set to “Large” or

“Small.”



If Front L/R speaker’s size is set to “Small,” Rear and

Center speaker’s size can be set to “Small” or “None.”



Subwoofer’s size can be set only to “Large” or

“None”.

27