LG VC20261HQ: инструкция

E

If you draw the latch lock, the bent tube is

How to Use

curved. If you stretch the bent tube, it returns to

its original position.

Connecting the flexible hose

Push the end of the head (1) on the flexible hose

How to plug in and use

(2) into the attachment point on the vacuum cleaner.

Pull out the mains lead to the desired length

and plug into the socket.

To remove the flexible hose from the vacuum

Press button (17) to start the vacuum cleaner.

cleaner, press on the button (3) situated on the

head, then pull upwards.

To stop it press the button (17) again.

Assembling the tubes

Adjusting the power level

(depending on model)

(depending on model)

• Suction capacity increases steplessly up

• Metal tube (4,5)

-

Fit together the two tubes by twisting slightly.

to MAX.(19)

• Telescopic tube (6)

• The flexible hose handle (20) has a

- Push spring latch (7).

manual air flow regulator (21) which

- Pull out tube to required length.

allows you to briefly reduce the suction level.

- Release spring latch to lock.

Carrying and storage

Using the cleaning head and Accessory

When you have switched off and unplugged

Nozzles

(depending on model)

the appliance, press on the button (18) to

Fit the large cleaning head onto the end of the tube.

automatically rewind the cord.

• Use stowage clip as shown when storing

• The 2 position head (10) is equipped with

a pedal (11) which allows you to alter its

the cleaner (22).

position according to the type of floor to be

Changing the dust bag

cleaned. Hard floor position (tiles, parquet

floors...): Press on the pedal to lower the

The dustbag needs changing when the cleaner

brush.Carpet or rug position: Press on

is set to maximum power and the cleaner head

the pedal to lift the brush up.

is off the floor but the “bag full” indicator

window (23) is completely coloured red.

• Crevice Tool (14)

Even if the dustbag does not appear to be

For vacuuming in those normally inaccess-

full at this stage, it should be changed.

ible places i.e. reaching cobwebs, or down

It could be that a great deal of very fine dust

the side of a sofa!

has clogged up the pores of the dust bag.

• Upholstery Nozzle (15)

• Turn off the appliance and unplug it.

• Remove hose.

For vacuuming upholstery, mattresses, etc. The

• Open the cover (24)

thread collectors help to pick up the threads and fluff.

Your appliance is equipped with either a

• Dusting brush (16)

paper dust bag or a fabric dust bag (28)

(depending on model)

For vacuuming picture frames furniture

• Push the lever forwards in the direction of

outlines, books and other uneven objects.

the arrow (26), and pull off the full paper

• Accessory Holder can be attached on the

filter bag towards the rear. Remove the

Extention wands using clamping hook.

bag and throw it away.

Accessories can be stored in the holder (30).

• Insert the new paper filter bag into the unit

•

Bent tube (34)

with the arrow pointing downwards (27).

The Bent tube is used to clean easily under

sofa, table and bed.

Connect the bent tube to the hose and connect

the telescopic tube to the bent tube (You can

also connect the telescopic tube to the hose

without bent tube)

- 9 -