LG 47LA740S: инструкция

www.lg.com

LA62** 

LA64** 

LA66**

LA69**

LA74**

LN57** 

OWNER’S MANUAL

LED TV

Please read this manual carefully before operating 

your set and retain it for future reference.

* LG LED TV applies LCD screen with LED backlights.

P/NO : MFL67658601(1303-REV01)

Printed in Korea

A-2

TABLE OF CONTENTS

COMMON

TABLE OF CONTENTS

A-3  SETTiNg up ThE TV

A-3  Attaching the stand

A-6  Tidying cables

LANguAgE

LANguAgE LiST

English

Magyar

Polski

Česky

Slovenčina

Română

Български

Eesti

Lietuvių k.

Latviešu

Srpski

Hrvatski

Shqip

Bosanski

Македонски

Русский

COMMON

B-1  MAKiNg CONNECTiONS

B-1  Antenna connection

B-4  Satellite dish connection

B-5  HDMI connection

B-9  -  ARC (Audio Return Channel)

B-11  DVI to HDMI connection

B-14  Component connection

B-17  Composite connection

B-18  MHL connection

B-23  Audio connection

B-23  -  Digital optical audio connection

B-27  USB connection

B-30  CI module connection

B-33  Headphone connection

B-38  Euro Scart connection

B-54 SpECiFiCATiONS

A-3

SETTING UP THE TV

LA62**, LA64**, LA66**, LN57**-ZE/ZK

3

1

Front

M4 x 14

4 EA

Stand Base

Stand Body

M4 x 14

4 EA

M4 x 14

4 EA

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

2

(Only LA64**, LA66**)

(Only LA62**, LN57**-ZE/ZK)

(Only LA62**, LN57**-ZE/ZK)

(Only LA64**, LA66**)

A-4

SETTING UP THE TV

LA69**, LA74**

2

3

1

Stand Base

M4 x 20

4EA

A-5

SETTING UP THE TV

 CAuTiON 

y

When attaching the stand to the TV 

set, place the screen facing down on a 

cushioned table or flat surface to protect the 

screen from scratches.

y

Make sure that the screws are inserted 

correctly and fastened securely. (If they are 

not fastened securely enough, the TV may 

tilt forward after being installed.) 

Do not use too much force and over tighten 

the screws; otherwise screw may be 

damaged and not tighten correctly. 

 NOTE

y

Removing the protective film (from the 

bottom)

(Depending on model)

Protective film is temporarily attached to 

prevent the surface of the product from 

being damaged during delivery.

Once the TV has been installed, please 

remove the protective film on the bottom of 

the unit as shown in the figure.

y

Remove the stand before installing the TV 

on a wall mount by performing the stand 

attachment in reverse.

LN57**-ZA

2

3

1

Stand Body

Stand Base

P5 x 25

3EA

M4 x 14

4EA

A-6

SETTING UP THE TV

Tidying cables

1  Gather and bind the cables with the Cable 

Holder and the Cable Management.

2  Fix the Cable Management firmly to the TV.

(Only LA62**, LA64**, LA66**, LN57**-ZE/ZK)

Cable Holder

Cable Management

(Only LA69**, LA74**)

⨲㘶ᖂ2

㏪ⱞ⋾#Ɐᴏ

Cable Holder

Cable Management

(Only LN57**-ZA)

1  Gather and bind the cables with the Cable 

Holder.

Cable Holder

 CAuTiON

y

Do not move the TV by holding the cable 

holders, as the cable holders may break, 

and injuries and damage to the TV may 

occur.

www.lg.com

OWNER’S MANUAL

LED TV

Please read this manual carefully before operating 

your set and retain it for future reference.

* LG LED TV applies LCD screen with LED backlights.

2

ENG

ENGLISH

TABLE OF CONTENTS

TABLE OF CONTENTS

3 

LICENSES

3 

OPEN SOURCE SOFTWARE NOTICE

4 

SAFETy INSTRUCTIONS

10 

-  Viewing 3D Imaging (Only 3D models)

12  INSTALLATION PROCEdURE

12  ASSEMBLING ANd PREPARING

12 

Unpacking

15 

Separate purchase

16 

Parts and buttons

17 

Lifting and moving the TV

18 

Mounting on a table

20 

Mounting on a wall

22  REMOTE CONTROL

24  MAGIC REMOTE CONTROL 

FUNCTIONS

25 

Registering Magic Remote Control

25 

How to use Magic Remote Control

25 

Precautions to Take when Using the Magic 

Remote Control

26  USING THE USER GUIdE

27  MAINTENANCE

27 

Cleaning your TV

27 

-  Screen, frame, cabinet and stand

27 

-  Power cord

27  TROUBLESHOOTING

28  EXTERNAL CONTROL dEVICE 

SETUP

28  SPECIFICATIONS

 WARNING

y

If you ignore the warning message, you may 

be seriously injured or there is a possibility 

of accident or death.

 CAUTION

y

If you ignore the caution message, you may 

be slightly injured or the product may be 

damaged.

 NOTE

y

The note helps you understand and use 

the product safely. Please read the note 

carefully before using the product.

3

ENG

ENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit 

www.lg.com

.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D 

symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI logo 

are trademarks or registered trademarks of HDMI Licensing LLC in the United States 

and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a 

subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays 

DivX video. Visit 

divx.com

 for more information and software tools to convert your 

files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered 

in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your 

registration code, locate the DivX VOD section in your device setup menu. Go to vod.

divx.com for more information on how to complete your registration. 

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

 “DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or 

its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents :  

7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 

& other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and 

the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark 

of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this 

product, please visit 

http://opensource.lge.com .

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are 

available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of 

performing such distribution (such as the cost of media, shipping and handling) upon email request to 

opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the 

product.

4

ENG

ENGLISH

SAFETY INSTRUCTIONS

SAFETy INSTRUCTIONS

Please read these safety precautions carefully before using the product.

 WARNING

y

Do not place the TV and/or remote control in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that produce heat

- Near kitchen counters or humidifiers where they can easily be exposed to steam 

or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

y

Do not place the product where it might be exposed to dust. 

This may cause a fire hazard.

y

Mains Plug is the TV connecting/disconnecting device to AC mains electric supply.

This plug must remain readily attached and operable when TV is in use.

y

Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or 

covered with dust, dry the power plug completely or wipe dust off. 

You may be electrocuted due to excess moisture.

y

Make sure  to connect Mains cable to compliant AC mains socket with Grounded 

earth pin. (Except for devices which are not grounded on earth.) Otherwise 

possibility  you may be electrocuted or injured.

y

Insert power cable  plug completely into wall socket otherwise if not secured 

completely into socket, fire ignition may break out.

y

Ensure the power cord does not come into contact with hot objects such as a 

heater. 

This may cause a fire or an electric shock hazard.

y

Do not place a heavy object, or the product itself, on power cables. 

Otherwise, this may result in fire or electric shock.

y

Bend antenna cable between inside and outside building to prevent rain from 

flowing in. 

This may cause water damaged inside the Product and could give an electric 

shock.

y

When mounting TV onto wall make sure to neatly install and isolate cabling from 

rear of TV as to not create possibility of electric shock /fire hazard.

5

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not plug too many electrical devices into a single multiple electrical outlet. 

Otherwise, this may result in fire due to over-heating.

y

Do not drop the product or let it fall over when connecting external devices. 

Otherwise, this may result in injury or damage to the product.

Desiccant

y

Keep the anti-moisture packing material or vinyl packing out of the reach of 

children. 

Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the 

patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause 

suffocation. Keep it out of the reach of children.

y

Do not let your children climb or cling onto the TV. 

Otherwise, the TV may fall over, which may cause serious injury.

y

Dispose of used batteries carefully to  ensure that a small child does not consume 

them.

Please seek Doctor- Medical Attention immediately if child consumes batteries.

y

Do not insert any metal objects/conductors (like a metal chopstick/cutlery/

screwdriver) between power cable plug and input Wall Socket while it is connected 

to the input terminal on the wall. Additionally, do not touch the power cable right 

after plugging into the wall input terminal. You may be electrocuted.

 (Depending on model)

y

Do not put or store inflammable substances near the product.

There is a danger of combustion/explosion or fire due to careless handling of the 

inflammable substances.

y

Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the 

product, or inflammable objects such as paper and matches. Children must pay 

particular attention. 

Electrical shock, fire or injury can occur. If a foreign object is dropped into the 

product, unplug the power cord and contact the service centre.

y

Do not spray water on the product or scrub with an inflammable substance (thinner 

or benzene). Fire or electric shock accident can occur.

y

Do not allow any impact, shock or any objects to fall  into the unit, and do not drop 

anything onto the screen. 

You may be injured or the product can be damaged.

y

Never touch this product or antenna during a thunder or lighting storm. 

You may be electrocuted.

y

Never touch the wall outlet when there is leakage of gas, open the windows and 

ventilate. 

It may cause a fire or a burn by a spark.

6

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not disassemble, repair or modify the product at your own discretion.  

Fire or electric shock accident can occur.  

Contact the service centre for check, calibration or repair.

y

If any of the following occur, unplug the product immediately and contact your local 

service centre.

- The product has been impacted by shock

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in fire or electric shock.

y

Unplug the TV from AC mains wall socket if you do not intend to use the TV for a 

long period of time.

Accumulated dust can cause fire hazard and insulation deterioration can cause 

electric leakage/shock/fire.

y

Apparatus shall not be exposed to dripping or splashing and no objects filled with 

liquids, such as vases, shall be placed on the apparatus.

7

ENG

ENGLISH

SAFETY INSTRUCTIONS

 CAUTION

y

Install the product where no radio wave occurs.

y

There should be enough distance between an outside antenna and power lines to 

keep the former from touching the latter even when the antenna falls.  

This may cause an electric shock.

y

Do not install the product on places such as unstable shelves or inclined surfaces. 

Also avoid places where there is vibration or where the product cannot be fully 

supported.  

Otherwise, the product may fall or flip over, which may cause injury or damage to 

the product.

y

If you install the TV on a stand, you need to take actions to prevent the product 

from overturning. Otherwise, the product may fall over, which may cause injury.

y

If you intend to mount the product to a wall, attach VESA standard mounting interface (optional 

parts) to the back of the product. When you install the set to use the wall mounting bracket (optional 

parts), fix it carefully so as not to drop.

y

Only use the attachments / accessories specified by the manufacturer.

y

When installing the antenna, consult with a qualified service technician. If not 

installed by a qualified technician, this may create a fire hazard or an electric shock 

hazard.

y

We recommend that you maintain a distance of at least 2 to 7 times the diagonal 

screen size when watching TV.  

If you watch TV for a long period of time, this may cause blurred vision.

y

Only use the specified type of battery.  

This could cause damage to the remote control.

y

Do not mix new batteries with old batteries.  

This may cause the batteries to overheat and leak.

y

Batteries should not be exposed to excessive heat.eg  keep away from direct Sunlight , open 

fireplace and electric heaters .

y

Do not place non-rechargeable batteries in charging device.

y

Make sure there are no objects between the remote control and its sensor.

y

Signal from Remote Control can be interrupted due to external/internal  lighting eg 

Sunlight, fluorescent lighting.

If this occurs turn off lighting or darken viewing area.

y

When connecting external devices such as video game consoles, make sure the 

connecting cables are long enough.  

Otherwise, the product may fall over, which may cause injury or damage the 

product.

8

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not turn the product On/Off by plugging-in or unplugging the power plug to the 

wall outlet. (Do not use the power plug for switch.)  

It may cause mechanical failure or could give an electric shock.

y

Please follow the installation instructions below to prevent the product from 

overheating.

- The distance between the product and the wall should be more than 10 cm.

- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in 

a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

y

Take care not to touch the ventilation openings when watching the TV for long 

periods as the ventilation openings may become hot. This does not affect the 

operation or performance of the product.

y

Periodically examine the cord of your appliance, and if its appearance indicates damage or 

deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact 

replacement part by an authorized servicer.

y

Prevent dust collecting on the power plug pins or outlet.  

This may cause a fire hazard.

y

Protect the power cord from physical or mechanical abuse, such as being twisted, 

kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, 

wall outlets, and the point where the cord exits the appliance.

y

Do not press strongly upon the panel with a hand or sharp object such as nail, 

pencil or pen, or make a scratch on it, as it may cause damage to screen.

y

Avoid touching the screen or holding your finger(s) against it for long periods of 

time. Doing so may produce some temporary or permanent distortion/damage to 

screen.

y

When cleaning the product and its components, unplug the power first and wipe it 

with a soft cloth. Applying excessive force may cause scratches or discolouration. 

Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or 

industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the 

product and its panel.  

Otherwise, this may result in fire, electric shock or product damage (deformation, 

corrosion or breakage).

y

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power 

source even if you turn off this unit by SWITCH.

y

When unplugging the cable, grab the plug and unplug it, by pulling at the plug.

Don’t pull at the cord to unplug the power cord from the power board, as this could 

be hazardous.

y

When moving the product, make sure you turn the power off first. Then, unplug the 

power cables, antenna cables and all connecting cables.  

The TV set or power cord may be damaged, which may create a fire hazard or 

cause electric shock.

9

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

When moving or unpacking the product, work in pairs because the product is 

heavy.  

Otherwise, this may result in injury.

y

Contact the service centre once a year to clean the internal parts of the product.  

Accumulated dust can cause mechanical failure.

y

Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power supply cord or plug is 

damaged, liquid has been spilled or objects have fallen into the apparatus, the 

apparatus has been exposed to rain or moisture, does not operate normally, or has 

been dropped.

y

If the product feels cold to the touch, there may be a small “flicker” when it is turned 

on. This is normal, there is nothing wrong with product.

y

The panel is a high technology display product with resolution of two million to six 

million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue 

or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and 

does not affect the performance and reliability of the product.   

This phenomenon also occurs in third-party products and is not subject to 

exchange or refund.

y

You may find different brightness and color of the panel depending on your viewing 

position(left/right/top/down).  

This phenomenon occurs due to the characteristic of the panel. It is not related with 

the product performance, and it is not malfunction.

y

Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video 

game) for a prolonged time may cause damage to the screen, resulting in retention of the image, 

which is known as image sticking. The warranty does not cover the product for image sticking.  

Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours 

for LCD, 1 or more hours for Plasma).  

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of 

the panel.  

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

y

Generated Sound 

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by 

plastic thermal contraction due to tempera-ture and humidity. This noise is common for products 

where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is 

generated from a high-speed switching circuit, which supplies a large amount of current to operate a 

product. It varies depending on the product.  

This generated sound does not affect the performance and reliability of the product.

10

ENG

ENGLISH

SAFETY INSTRUCTIONS

Viewing 3d Imaging (Only 3d models)

 WARNING

Viewing Environment

y

Viewing Time

 - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long 

period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness 

y

Some users may experience a seizure or other abnormal symptoms when they are exposed to a 

flashing light or particular pattern from 3D contents.

y

Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, 

cardiac disorder, or blood pressure disease, etc.

y

3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double 

images or discomfort in viewing may be experienced.

y

If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble 

sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than 

the average adult.

y

If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D 

contents.

Symptoms which require discontinuation or refraining from watching 3d contents

y

Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking. 

y

When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the 

symptom subsides.

 - Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, 

dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

11

ENG

ENGLISH

SAFETY INSTRUCTIONS

 CAUTION

Viewing Environment

y

 Viewing Distance

 - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you 

feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

y

Infants/Children

 - Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

 - Children under the age of 10 may overreact and become overly excited because their vision is in 

development (for example: trying to touch the screen or trying to jump into it. Special monitoring 

and extra attention is required for children watching 3D contents. 

 - Children have greater binocular disparity of 3D presentations than adults because the distance 

between the eyes is shorter than that of adults. Therefore they will perceive more stereoscopic 

depth compared to adults for the same 3D image.

y

Teenagers

 - Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D 

contents. Advise them to refrain from watching 3D contens for a long time when they are tired.

y

Elderly

 - The elderly may perceive less 3D effect compared to the young. Do not sit closer to the TV than the 

recommended distance.

Cautions when using the 3d glasses

y

 Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

y

 Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.

y

 Using modified 3D glasses may cause eye strain or image distortion.

y

 Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

y

 The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping 

the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with 

chemicals.

12

ENG

ENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

 NOTE

y

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

y

The available menus and options may differ from the input source or product model that you are 

using.

y

New features may be added to this TV in the future.

y

The TV can be placed in standby mode in order to reduce the power consumption. And the TV should 

be turned off if it will not be watched for some time, as this will reduce energy consumption.

y

The energy consumed during use can be significantly reduced if the level of brightness of the picture 

is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEdURE

1  Open the package and make sure all the accessories are included.

2  Attach the stand to the TV set.

3  Connect an external device to the TV set.

4  Make sure the network connection is available. 

You can use the TV network functions only when the network connection is made. 

ASSEMBLING ANd PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local 

dealer where you purchased your product. The illustrations in this manual may differ from the actual 

product and item.

 CAUTION

y

Do not use any unapproved items to ensure the safety and product life span.

y

Any damage or injuries caused by using unapproved items are not covered by the warranty.

y

Some models have a thin film attached on to the screen and this must not be removed.

 NOTE

y

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to upgrade 

of product functions.

y

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick 

and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory 

stick does not fit into your TV’s USB port.

A

B

A

B

*A 

<

=

 10 mm

*B 

<

=

 18 mm

13

ENG

ENGLISH

ASSEMBLING AND PREPARING

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CH

VOL

P

A

G

E

FAV

3D

MUTE

1 2 3

4 5 6

7 8

0

9

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE INPUT

Remote control and 

batteries (AAA)

(Only LA62**, LA64**, 

LN570*, LN575*, LN577*)

(See p. 22, 23)

P

123

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CH

VOL

P

A

G

E

FAV

3D

MUTE

1 2 3

4 5 6

7 8

0

9

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE INPUT

Magic Remote Control, 

Batteries (AA)

(Only LA66**, LA69**, 

LA74**, LN578*)

(See p. 24)

Owner’s manual

Wi-Fi dongle

(Depending on model)

Cinema 3d Glasses

The number of 3D glasses 

may differ depending on 

the model or country.

(Depending on model)

dual play glasses

(Depending on model)

Cable Holder

(Depending on model)

(See p. A-6)

Power Cord

(Depending on model)

Stand Screws

M4 x 14

(8 EA: Only LN57**-ZE/ZK,

LA62**, LA64**, LA66**)

(4 EA: Only LN57**-ZA)

(See p. A-3,A-5)

Stand Screws

M4 x 20

(4 EA: Only LA69**, 

LA74**)

(See p. A-4)

Stand Screws

3 EA, P5 x 25 

(Only LN57**-ZA)

(See p.A-5)

desk-mount Screw

(1 EA : Only 

32/39/42/47/50/60LN57**-

ZA)

(2 EA :Only

32/39/42/47/50LN57**-ZE/

ZK, 32/39/42/47/50LA62**, 

32/42/47/50LA64**, 

32/42/47/50LA66**)

(See p. 18)

desk-mount Cable 

2 EA (Only

32/39/42/47/50LN57**-ZE/

ZK, 32/39/42/47/50LA62**, 

32/42/47/50LA64**, 

32/42/47/50LA66**)

(See p. 18)

Bracket Screw

2 EA, P4 x 8

(Only 47/50LN57**-

ZE/ZK,47/50LA62**, 

47/50LA64**,47/50LA66**)

(See p. 18)

Bracket Screw

2 EA, M4 x 8

(Only 32/39/42LN57**-

ZE/ZK, 32/39/42LA62**, 

32/42LA64**,32/42LA66**)

(See p. 18)

Wall mount inner spacers

4 EA

(Only LA64**)

(See p. 21)

14

ENG

ENGLISH

ASSEMBLING AND PREPARING

Tag On

Tag On

(Depending on model)

Stand Body / Stand Base

(Only LN57**-ZE/ZK, 

LA62**, LA64** , LA66**)

(See p.A-3)

Stand Base

(Only LA69**, LA74** )

(See p.A-4)

Stand Body / Stand Base

(Only LN57**-ZA)

(See p.A-5)

LG Audio device

(Depending on model)