LG DK379: Connections (Continued) Connecting to Optional Equipment

Connections (Continued)

Connecting to Optional Equipment

Notes

–

If the audio format of the digital output does not match

Connecting to an amplifier equipped with two

the capabilities of your receiver, the receiver will

channel analog stereo or Dolby Pro Logic ll/

produce a strong, distorted sound or no sound at all.

Pro Logic

– Six Channel Digital Surround Sound via digital con-

Connect the Left and Right AUDIO OUT jacks on the

nection can only be obtained if your receiver is

DVD Player to the audio left and right in jacks on your

equipped with a Digital Multi-channel decoder.

amplifier, receiver, or stereo system, using the audio

– To see the audio format of the current DVD in the on-

cables (A).

screen display, press AUDIO.

Connecting to an amplifier equipped with two

Analog connection to a multi-channel A/V receiver

channel digital stereo (PCM) or to an Audio/

with 6 Channel connectors (Dolby Digital, DTS)

Video receiver equipped with a multi-channel

This DVD Player contains a multi-channel decoder. This

decoder (Dolby Digital™, MPEG 2, or DTS)

enables playback of DVDs recorded in Multi-channel

Surround without the need for an optional decoder.

Connect one of the DVD Player’s DIGITAL AUDIO

11

OUT jacks (OPTICAL O or COAXIAL X) to the cor-

Connect the CENTER and WOOFER jacks for the

responding in jack on your amplifier. Use an option-

11

Center speaker and the Subwoofer (C) to the corre-

al digital (optical O or coaxial X) audio cable.

sponding in jacks on your receiver.

You will need to activate the player’s digital output.

Connect the Left and Right FRONT speaker jacks

22

(See “Digital Audio Output” on page 14).

22

(F) to the corresponding in jacks on your receiver.

Digital Multi-channel sound

Connect the Left and Right REAR speaker jacks (R)

A digital multi-channel connection provides the best

33

to the corresponding in jacks on your receiver.

sound quality. For this you need a multi-channel

Make the appropriate Sound settings for Analog

Audio/Video receiver that supports one or more of the

44

Output and Speaker Settings in the setup menu.

audio formats supported by your DVD Player (MPEG 2,

See page 14.

Dolby Digital and DTS). Check the receiver manual and

the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

10