LG F2200: Installation

Installation

1. Inserting the SIM Card

n SIM Card

When you register as a subscriber with a network operator,

1. With the back of the phone, press the latch up and

you can get a SIM (Subscriber Identity Module) card. The SIM

hold it. Slide the battery and lift it away as shown.

card contains a computer chip that keeps track of your phone

number, the services included in your subscription and your

phone book information among other things.

3. Place the battery on the back; Position the lugs

match the tabs on the battery with the grooves on

the phone. Then slightly slide the battery up until the

latch clicks.

2. Slide the SIM card into the slot, under the silvery

holders, with the golden connectors facing

downward.

n Caution

• Removing the battery from the phone whilst it is switched on

may cause it to malfunction.

• The metal contact of the SIM card can be easily damaged by

scratches.

Pay special attention to the SIM card when you handle and

install.

Follow the instructions supplied with the SIM card.

n Remove the SIM card

• The SIM card must be treated with the same care as a bank

card.

Slide the SIM card out of the slot,

as shown, toward the top of the

• If your phone and/or SIM card are lost or stolen, call the

phone.

service provider immediately to prevent misuse.

16

Installation

2. Charging the Battery

• Insert the battery pack charger vertically to wall power outlet.

• If you use the battery pack charger out of your own country,

To connect the travel adapter to the phone, you must

use an attachment plug adaptor for the proper configuration.

have installed the battery.

•

Do not remove your battery or the SIM card while charging.

n Warning

• Unplug the power cord and charger during lightning storms to

avoid electric shock or fire.

• Make sure that no sharp-edged items such as animal teeth,

nails, come into contact with the battery. There is a risk of this

causing a fire.

• Do not place or answer calls while charging the phone as it

may short-circuit the phone and/or cause electric shock or

fire.

1. Ensure the battery is fully charged before using the

phone.

3. Disconnecting the charger

2. With the arrow facing you as shown in the diagram

Disconnect the travel adapter

push the plug on the battery adapter into the socket

from the phone by pressing its

on the bottom of the phone until it clicks into place.

side buttons as shown in the

3. Connect the other end of the travel adapter to the

diagram.

mains socket. Use only the included packing

charger.

4. The moving bars of battery icon will stop after

charging is complete.

n Caution

• Do not force the connector as this may damage the phone

and/or the travel adapter.

17