LG S5200 black: Getting started

Getting started

Installing the SIM card and

2. Install the SIM card.

Getting started

battery

Insert the SIM card into the holder. Slide the SIM

Make sure the power is off before you remove the

card into the SIM card holder. Make sure that the

battery.

SIM card is inserted properly and that the gold

contact area on the card is facing downwards. To

1. Remove the battery.

remove the SIM card, press down lightly and pull it

Press the button to release the battery, then slide

in the reverse direction.

the battery down till it stops. Now lift the battery

from its compartment.

To insert the SIM card

To remove the SIM card

Caution!

]

The metal contact of the SIM card can be easily

Note

damaged by scratches. Pay special attention to

]

Removing the battery from the phone when the

the SIM card while handling.

power is on may cause the phone to

Follow the instructions supplied with the SIM

malfunction.

card.

17

Getting started

3. Install the battery.

1. With the arrow facing you as shown in the diagram

Getting started

push the plug on the battery adapter into the

socket on the bottom of the phone until it clicks

into place.

2. Connect the other end of the mains adapter to

the mains socket. Only use the charger included in

the box.

3. The moving bars of battery icon will stop after

charging is complete.

Charging the Battery

Caution!

To connect the mains adapter to the phone, you

]

Do not force the connector as this may damage

must have installed the battery.

the phone and/or the charger.

]

If you use the battery pack charger out of your

own country, use an attachment plug adapter

for the proper configuration.

]

Do not remove your battery or the SIM card

while charging.

18

Warning!

Getting started

]

Unplug the power cord and charger during

lightning storms to avoid electric shock or fire.

]

Make sure that no sharp-edged items such as

animal teeth or nails come into contact with the

battery. There is a risk of this causing a fire.

]

Do not place or answer calls while charging the

phone as it may short-circuit the phone and/or

cause electric shock or fire.

Note

Disconnecting the adapter

]

Ensure the battery is fully charged before using

Disconnect the travel adapter from the phone by

the phone for the first time.

pressing its side buttons as shown in the diagram.

]

Do not remove the battery or SIM card while

1. When charging is finished, the moving bars of the

charging.

battery icon stop and ‘Full’ is displayed on the

]

In the case the battery is not properly charged,

screen.

please turn the phone off and on using the

2. Unplug the adapter from the power outlet.

power key. Then detach and reattach the

Disconnect the adapter from the phone by

battery, and recharge the phone.

pressing the grey tabs on both sides of the

connector and pull the connector out.

19

Getting started

Getting started

Turning your phone on and off

Access codes

You can use the access codes described in this

Turning your phone ON

section to avoid unauthorised use of your phone.

1. Install a battery to the handset and connect the

The access codes (except PUK and PUK2 codes) can

phone to an external power source such as the

be changed by using the Change codes feature

travel adapter, cigarette lighter adapter or hands-

[Menu 7-4-6].

free car kit. Or install a charged battery pack to

the handset.

PIN code (4 to 8 digits)

2. Press and hold for a few seconds until the

The PIN (Personal Identification Number) code

LCD screen is turned on.

protects your SIM card against unauthorised use.

The PIN code is usually supplied with the SIM card.

3. Depending on the status of the PIN code request

When the PIN code request is set to Enable, your

setting you may need to enter your PIN code.

phone will request the PIN code every time the

phone is switched on. When the PIN code request is

Turning your phone OFF

set to Disable, your phone connects to the network

1. Press and hold for a few seconds until the

directly without the PIN code.

LCD screen is turned off.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is

required to access functions such as Advice of Call

Charge and Fixed dial number. These functions are

only available if supported by your SIM card. Check

with your network operator for further information.

20