LG F2400: Getting started

Getting started: LG F2400

Getting started

Installing the SIM card and the handset

2. Remove the battery.

battery

Hold the top edge of the battery and lift the battery

Make sure the power is off before you remove the

from the battery compartment.

battery.

1. Remove the battery cover.

Press the battery release latch and slide the battery

cover toward the bottom of the phone. And remove

the battery cover.

n Note Removing the battery from the phone when the

power is on may cause the phone to malfunction.

20

Getting started

3. Install the SIM card

4. Install the battery.

Insert the SIM card into the holder. Slide the SIM

Insert the bottom of the battery first into the bottom

card into the SIM card holder. Make sure that the

edge of the battery compartment. Push down the

SIM card is inserted properly and that the gold

top of the battery until it snaps into space.

contact area on the card is facing downwards. To

remove the SIM card, press down lightly and pull it

in the reverse direction.

5. Replace the battery cover.

Lay the battery cover in place of the phone and slide

To insert the SIM card To remove the SIM card

it until the latch clicks.

n Caution The metal contact of the SIM card can be

easily damaged by scratches. Pay special

attention to the SIM card while handling.

Follow the instructions supplied with the SIM

card.

21

Getting started

Charging the battery

4. The moving bars of battery icon will stop after

charging is complete.

To connect the mains adapter to the phone, you must

have installed the battery.

n Caution • Do not force the connector as this may

damage the phone and/or the travel adapter.

• Insert the battery pack charger vertically to

wall power outlet.

• If you use the battery pack charger out of

your own country, use an attachment plug

adapter for the proper configuration.

• Do not remove your battery or the SIM card

while charging.

n Warning • Unplug the power cord and charger during

lightning storms to avoid electric shock or

fire.

• Make sure that no sharp-edged items such

1. Ensure the battery is fully charged before using the

as animal teeth, nails, come into contact

phone.

with the battery. There is a risk of this

causing a fire.

2. With the arrow facing you as shown in the diagram

• Do not place or answer calls while charging

push the plug on the battery adapter into the socket

the phone as it may short-circuit the phone

on the bottom of the phone until it clicks into place.

and/or cause electric shock or fire.

3. Connect the other end of the mains adapter to the

mains socket. Use only the included packing

charger.

22

Getting started

Disconnecting the charger

Disconnect the travel adapter from the phone by

pressing its side buttons as shown in the diagram.

23