LG C1100: Installation

Installation

1. Inserting the SIM Card

Locate the SIM card socket in the back

of the phone. Follow the steps below to

install the SIM card.

1. Remove the battery if attached.

2. Slide the SIM card into the slot,

under the silvery holders, with the

golden connectors facing down.

2. Removing the SIM Card

Follow the steps below to Remove the

SIM card.

1. Remove the battery if attached.

2. Take out the SIM card from the slot.

Notice

• Removing the battery from the phone whilst it is

switched on may cause it to malfunction.

• The metal contact of the SIM card can be easily

damaged by scratches. Pay special attention to the SIM

card when you handle and install. Follow the

Getting Started

instructions supplied with the SIM card.

18

3. Installing the Battery

1. Position the lugs on the bottom of

the battery into the retaining holder.

2. Then push to the half of the battery

into position.

4. Charging the Battery

To connect the travel adapter to the phone, you must have installed

the battery.

1. With the arrow facing you as shown

in the diagram push the plug on the

battery adapter into the socket on

the bottom of the phone until it

clicks into place.

Getting Started

2. Connect the other end of the travel

adapter to the mains socket.

Use only the included packing

charger.

19

Installation

Warning

• Do not force the connector as this may damage the

phone and/or the travel adapter.

5. Disconnecting the charger

Disconnect the travel adapter from the

phone by pressing its side buttons as

shown in the diagram.

Note

• Ensure the battery is fully charged before using the

phone.

• Do not remove your battery or the SIM card while

charging.

• The moving bars of battery icon will stop after

charging is complete.

Note

If the battery does not charge,

Getting Started

• switch the phone off.

• ensure the battery is correctly fit.

20