LG G5500 – страница 4

Getting StartedGetting Started

Charging the battery

Disconnecting the adapter

Only use the mains adapter supplied with your phone.

1. When charging is finished, the moving bars of the battery icon

1. With the battery in position on the phone, connect the lead from

stop and ‘Full’ is displayed on the screen.

the travel adapter to the bottom of the phone. Make sure that the

arrow on the lead connector is facing towards the front of the

2. Unplug the adapter from the power outlet. Disconnect the

phone.

adapter from the phone by pressing the grey tabs on both sides

of the connector and pull the connector out.

2. Connect the other end of the adapter to the power outlet.

Note • Ensure the battery is fully charged before first using the

phone.

• Do not remove the battery or SIM card while charging.

Caution Use of unauthorised accessories could damage your

• In the case the battery is not properly charged, please turn

phone and invalidate your warranty.

the phone off and on using the power key, then recharge

Do not force the connector as this may damage the

the battery. After detaching and reattaching the battery,

phone and/or the mains adapter.

please recharge the battery.

2120

Getting StartedGetting Started

Turning your phone on and off

Access codes

You can use the access codes described in this section to avoid

Turning your phone ON

unauthorised use of your phone. The access codes (except PUK

1. Install a battery to the handset and connect the phone to an

and PUK2 codes) can be changed by using the Change codes

external power source such as the travel adapter, cigarette

feature [Menu 8.5.6]. See page 93.

lighter adapter or hands-free car kit. Or install a charged battery

pack to the handset.

PIN code (4 to 8 digits)

2. Press for a few seconds until the LCD screen is turned on.

The PIN (Personal Identification Number) code protects your SIM

card against unauthorised use. The PIN code is usually supplied

3. Depending on the status of the PIN code request setting you

with the SIM card. When the PIN code request is set to Enable,

may need to enter your PIN code.

your phone will request the PIN code every time the phone is

Notice Like any other radio devices, avoid any unnecessary

switched on. When the PIN code request is set to Disable, your

contact with the antenna while your phone is on.

phone connects to the network directly without the PIN code.

Turning your phone OFF

PIN2 code (4 to 8 digits)

1. Press for a few seconds until the LCD screen is turned off.

The PIN2 code, supplied with some SIM cards, is required to

access functions such as Advice of Call Charge and Fixed

dial number. These functions are only available if supported by

your SIM card. Check with your network for further information.

PUK code (4 to 8 digits)

The PUK (PIN Unblocking Key) code is required to change a

blocked PIN code. The PUK code may be supplied with the SIM

card. If not, contact your network operator for the code. If you lose

the code, also contact your network operator.

PUK2 code (4 to 8 digits)

The PUK2 code, supplied with some SIM cards, is required to

change a blocked PIN2 code. If you lose the code, also contact

your network operator.

2322

Getting Started

Security code (4 to 8 digits)

The security code protects the unauthorised use of your phone.

The default security code is set to ‘0000’ and the security code is

G5500

required to delete all phone entries and to activate the Reset

settings menu. Also, the security code is required to enable or

disable the phone lock function to prevent unauthorised use of the

phone. The security code default setting can be modified from the

Security settings menu.

Barring password

The barring password is required when you use the Call barring

function. You obtain the password from your network operator

when you subscribe to this function. See page 92 for further details.

24

General functions

General functions

Making and answering calls

Making a call from the phonebook

You can save the names and phone numbers dialled regularly in

Making a call

the SIM card and/or phone memory, which is Phonebook. You can

dial a number by simply looking up the desired name in the

1. Make sure your phone is switched on.

Phonebook. For further details on the Phonebook feature, please

2. Enter a phone number, including the area code. To edit a

refer to page 54-55.

number on the LCD screen, press the right/left navigation keys

to move the cursor to the desired position or simply press the

Adjusting the volume

clear key ( ) to erase one digit at a time.

If you want to adjust the earpiece volume during a call, use the side

] Press and hold the clear key ( ) to erase the entire number.

keys ( ) . Press the up side key to increase and down side key to

3. Press the send key ( ) to call the number.

decrease the volume.

4. To end the call, press the end key ( ) or the right soft key.

Note In standby mode with the sliding keypad down, pressing the

You can also end the call by sliding the keypad up.

side keys adjusts the key tone volume.

Making a call using the send key

Answering a call

1. In standby mode, press the send key ( ) , and the latest

When you receive a call, the phone rings and the flashing phone

incoming, outgoing and missed phone numbers will be

icon appears on the screen. If the caller can be identified, the

displayed.

caller’s phone number (or name if saved in the phonebook) is

displayed.

2. Select the desired number by using the up/down navigation key.

1. To answer an incoming call, slide the keypad down.

3. Press .

(When Slide down has been set as the answer mode.

See page 87.)

Making an international call

Note If Any key has been set as the answer mode (see page 87),

1. Press and hold the key for the international prefix. The ‘+’

any key press will answer a call except for the or the right

character automatically selects the international access code.

soft key.

2. Enter the country code, area code, and the phone number.

Note

] To reject an incoming call, press and hold one of the side keys on

3. Press .

the left side of the phone without sliding the keypad down.

] You can answer a call while using the Phonebook or other menu

Ending a call

features.

When you have finished your call, press the end ( ) key.

2. To end the call, slide the keypad up or press the .

2726

General functions

General functions

Manner mode (Quick)

Changing the text input mode

1. When you are in a field that allows

You can activate the manner mode by pressing and holding down

characters to be entered, you will

one of the side keys ( ) in the state of sliding keypad up.

notice the text input mode indicator

in the lower right corner of the LCD

Signal strength

screen.

You can check the strength of your signal by the signal indicator

2. Change the text input mode by

( ) on the LCD screen of your phone. Signal strength can vary,

pressing . You can check the

particularly inside buildings. Moving near to a window may improve

current text input mode in the lower

reception.

right corner of the LCD screen.

Entering text

] Using the T9 mode

You can enter alphanumeric characters by using the phone’s

keypad. For example, storing names in the phonebook, writing a

The T9 predictive text input mode lets you enter words easily with a

message, creating a personal greeting or scheduling events in the

minimum number of key presses. As you press each key, the

calendar all require entering text.

phone begins to display the characters that it thinks you are typing

based on the built-in dictionary. You can also add new words in the

The following text input methods are available in the phone.

dictionary. As new words are added, the word changes to reflect

T9 mode

the most likely candidate from the dictionary.

This mode lets you enter words with only one keystroke per

1. When you are in the T9 predictive text input mode, start entering

letter. Each key on the keypad has more than one letter.

a word by pressing keys to . Press one key per letter.

The T9 mode automatically compares your keystrokes with an

– The word changes as letters are typed. Ignore what’s on the

internal dictionary to determine the correct word, thus requiring

screen until the word is typed completely.

far fewer keystrokes than the traditional ABC mode. This is

sometimes known as predictive text.

– If the word is still incorrect after typing completely, press the

down navigation key once or more to cycle through the other

ABC mode

word options.

This mode lets you enter letters by pressing the key labelled with

Example: Press to type Good

the required letter once, twice, three or four times until the letter

Press [Down navigation key] to type

is displayed.

Home

123 mode (Number mode)

– If the desired word is missing from the word choice list, add it

using the ABC mode.

Type numbers using one keystroke per number. To change to

123 mode in a text entry field, press the key until 123 mode

– You can select the language of the T9 mode. Press the left soft

is displayed.

key [Option], then select T9 languages. Select the desired

text input

mode

2928

General functions

General functions

language of T9 mode. You can also turn off the T9 mode by

Notice Refer to the table below for more information on the

selecting T9 off. The default setting on the phone is T9

characters available using the alphanumeric keys.

enabled mode.

2. Enter the whole word before editing or deleting any keystrokes.

Characters in the order display

Key

3. Complete each word with a space by pressing the key.

Upper case Lower case

To delete letters, press . Press and hold down to erase

1

. , - ? ! ' @ : 1 . , - ? ! ' @ : 1

entire words.

2

A B C 2 a b c 2

Note To exit from the text input mode without saving your input,

press . The phone goes back to standby mode.

3

D E F 3 d e f 3

4

G H I 4 g h i 4

]

Using the ABC mode

5

J K L 5 j k l 5

Use the to keys to enter your text.

6

M N O 6 m n o 6

1. Press the key labelled with the required letter:

7

P Q R S 7 p q r s 7

]

Once for the first letter

8

T U V 8 t u v 8

]

Twice for the second letter

9

W X Y Z 9 w x y z 9

]

And so on

0

Space key Space key

2. To insert a space, press the key once. To delete letters,

press the key. Press and hold down the key to clear

the whole display.

] Using the 123(Number) mode

The 123 mode enables you to enter numbers in a text message

(a telephone number, for example).

Press the keys corresponding to the required digits before

manually switching back to the appropriate text entry mode.

3130

General functionsGeneral functions

Answering an incoming call

Phonebook

To answer an incoming call when the handset is ringing, simply

You can store phone numbers and their corresponding names in

press the key. The handset is also able to warn you of an

the memory of your SIM card.

incoming call while you are already on a call. A tone sounds in the

In addition, you can store up to 255 numbers and names in the

earpiece, and the display will show that a second call is waiting.

phone memory.

This feature, known as Call waiting, is only available if your

network supports it. For details of how to activate and deactivate it

The SIM card and phone are both used in the same way in the

see Call waiting [Menu 8.4.4] on page 87.

Phonebook menu.

If Call waiting is activated, you can put the first call on hold and

(Refer to page 54-58 for details.)

answer the second, by pressing or by selecting left soft key,

then Hold & Answer. You can end the current call and answer

In-call menu

the waiting call by selecting left soft key and then End & Answer.

Your phone provides a number of control functions that you can

use during a call. To access these functions during a call,

Rejecting an incoming call

press the left soft key [Options].

You can reject an incoming call without answering by simply

pressing the key.

During a call

During a call, you can reject an incoming call by pressing the left

The menu displayed on the handset screen during a call is different

soft key [Menu] key and selecting the Conference/Reject or by

to the default main menu displayed when in standby mode, and

pressing the .

the options are described below.

Muting the microphone

Making a second call

You can mute the microphone during a call by pressing the [Menu]

You can get a number you wish to dial from the phonebook to

key then selecting Mute on. The handset can be unmuted by

make a second call. Press the right soft key then select Search.

selecting Mute off. When the handset is muted, the caller cannot

To save the dialled number into the phonebook during a call,

hear you, but you can still hear them.

press the right soft key then select Add new.

Switching DTMF tones on during a call

Switching between two calls

To turn DTMF tones on during a call, press the left soft key, and

To switch between two calls, press the left soft key then select

then select DTMF on. DTMF tones can be turned off the same

Swap.

way. DTMF tones allow your phone to make use of an automated

switchboard.

3332

General functionsGeneral functions

Displaying callers in a conference call

Multiparty or conference calls

To scroll through the numbers of the callers who make up a

The multiparty or conference service provides you with the ability to

conference call on the handset screen, use the up/down navigation

have a simultaneous conversation with more than one caller, if your

keys.

network operator supports this feature. A multiparty call can only

be set up when you have one active call and one call on hold, both

Taking a private call during a conference call

calls having been answered. Once a multiparty call is set up, calls

To have a private call with one caller from a conference call,

can be added, disconnected or separated (that is, removed from

display the number of the caller you wish to talk to on the screen,

the multiparty call but still connected to you) by the person who set

then press the left soft key. Select the Conference/Private to

up the multiparty call. These options are all available from the

put all the other callers on hold.

In-Call menu. The maximum callers in a multiparty call are five.

Once started, you are in control of the multiparty call, and only you

Ending a conference call

can add callers to the multiparty call.

The currently displayed caller from a conference call can be

Making a second call

disconnected by pressing the key. To end a conference call,

press the left soft key, then select the Conference/End

You can make a second call while currently on a call. Enter the

multiparty. After pressing the left soft key, selecting

second number and press the key. When the second call is

Conference/End all will end all the active and on-hold calls.

connected, the first call is automatically placed on hold. You can

swap between calls by pressing the left soft key then selecting

Swap.

Setting up a conference call

Place one call on hold and while the active call is on, press the left

soft key and then select the Conference/Join all.

Putting a conference call on hold

Press the left soft key, then select the Conference/Hold all.

Activate the conference call on hold

Press the left soft key, then select the Conference/Join all.

Adding calls to the conference call

To add a call to an existing conference call, press the left soft key,

then select the Conference/Join all.

3534

Menu tree

Menu tree

The following illustration shows the available menu structure and

3. Fun & Tools (see page 46)

5. Messages (continued)

indicates the:

3.1 Game

5.2 Multimedia messages

3.2 My folder

5.2.1 Write

] Number assigned to each menu option.

] Page where you can find the feature description.

3.2.1 Picture

5.2.2 Inbox

3.2.2 Animation

5.2.3 Outbox

You can go to the desired menu using the left soft key [Menu],

3.2.3 Sound

5.2.4 Draft

navigation keys and [OK] key. And you can also take a shortcut by

3.3 Unit converter

5.2.5 Settings

pressing the corresponding number key of desired menu after

*

pressing the left soft key [Menu].

3.4 Calculator

5.3 Voice messages

3.5 World time

5.3.1 Listen to voice

1. Profiles (see page 40)

2. Call register (continued)

3.6 Voice recorder

messages

1.1 Vibrate only

2.4 Delete recent calls

3.7 Infrared

5.3.2 Voice mailbox number

1.1.1 Activate

2.4.1 Missed calls

*

5.4 Info service

1.2 Silent

2.4.2 Received calls

4. Organizer (see page 51)

5.4.1 Receive

1.2.1 Activate

2.4.3 Dialled calls

4.1 Schedule

5.4.2 Inbox

1.2.2 Personalize

2.4.4 All calls

4.2 Memo

5.4.3 Topics

1.2.3 Rename

2.5 Call durations

4.3 Phone book

5.4.4 Alert

1.3 General

2.5.1 Last call

4.3.1 Search

5.4.5 Auto display

1.3.1 Activate

2.5.2 Received calls

4.3.2 Add new

5.4.6 Languages

1.3.2 Personalize

2.5.3 Dialled calls

4.3.3 Speed dials

5.5 Templates

1.3.3 Rename

2.5.4 All calls

4.3.4 Voice list

5.5.1 Text

1.4 Loud

*

2.6 Call costs

4.3.5 Caller groups

5.5.2 Multimedia

1.4.1 Activate

2.6.1 Last call's cost

4.3.6 Copy all

5.6 Name card

1.4.2 Personalize

2.6.2 All calls' cost

4.3.7 Delete all

5.7 Check memory

1.4.3 Rename

*

2.7 Cost settings

4.3.8 Settings

5.7.1 Text

1.5 Headset

2.7.1 Call cost's limit

4.3.9 Information

5.7.2 Multimedia

1.5.1 Personalize

2.7.2 Set tariff

1.6 Car

2.7.3 Auto display

5. Messages (see page 59)

6. Java

TM

(see page 75)

1.6.1 Personalize

2.8 GPRS information

5.1 Text messages

6.1 Applications

2.8.1 WAP information

5.1.1 Write message

6.2 Download

2. Call register (see page 42)

2.8.2 External device

5.1.2 Inbox

6.3 View information

2.1 Missed calls

2.8.3 Total data

5.1.3 Outbox

6.3.1 Memory status

2.2 Received calls

5.1.4 Draft

6.3.2 Java version

2.3 Dialled calls

5.1.5 Settings

5.1.6 Delete

: Shown only if supported by CPHS(Common PCS Handset Specification)

: Shown only if supported by CPHS(Common PCS Handset Specification)

3736

*

*

Menu tree

Selecting functions and options

7. Internet (see page 78)

8. Settings (continued)

Your phone offers a set of functions that allow you to customise the

7.1 Home

8.4 Call settings

phone. These functions are arranged in menus and sub-menus,

7.2 Bookmarks

8.4.1 Call divert

accessed via the two soft keys marked [ ] and [ ].

7.3 Push messages

8.4.2 Answer mode

Each menu and sub-menu lets you view and alter the settings of a

particular function

7.3.1 Inbox

8.4.3 Send my number

7.3.2 Receive

8.4.4 Call waiting

The roles of the soft keys vary according to the current context; the

7.4 Profiles

8.4.5 Minute minder

label on the bottom line of the screen just above each key indicates

7.5 Go to URL

8.4.6 Voice dial

its current role.

7.6 Cache settings

8.4.7 Auto redial

7.6.1 Clear cache

8.4.8 Phone line in use

7.6.2 Cache check

8.4.9 Closed user group

7.7 Security certificates

8.5 Security settings

7.8 Reset profiles

8.5.1 PIN code request

7.8.1 Yes

8.5.2 Phone lock

7.8.2 No

8.5.3 Key lock

7.9 WAP information

8.5.4 Call barring service

8.5.5 Fixed dial number

8. Settings (see page 83)

8.5.6 Change codes

8.1 Alarm clock

8.6 Network settings

8.2 Date & Time

8.6.1 Automatic

8.2.1 Set date

8.6.2 Manual

8.2.2 Date format

8.6.3 Preferred

8.2.3 Set time

8.7 GPRS settings

8.2.4 Time format

8.7.1 GPRS attach

8.3 Phone settings

8.7.2 External device

8.3.1 Display settings

8.8 Reset settings

8.3.2 Languages

9. SIM service (see page 97)

This menu depends on the SIM card and

network services.

*

*

*

(e.g.)

*

*

*

*

Press the left soft key

Press the right soft

to access the

key to activate the

available menu.

corresponding action.

: Shown only if supported by CPHS(Common PCS Handset Specification)

3938

*

Organizer

Organizer

• View all schedules

Memo

Menu 4.2

Shows the notes that are set for all days. Use the up/down

You can write, edit and delete a memo on a specific date.

navigation keys to browse through the note lists.

1. Scroll to highlight Memo.

• Go to date

2. Press the left soft key [Add].

Use this to jump to a specific date. Enter the date using the

numeric keys and the left/right navigation keys

3. Input the memo and then press the left soft key [Options].

The following options are available.

• Delete past

] Save: Allows you to save the memo.

You can delete expired schedule notes that have already been

notified.

] T9 languages: Select the T9 language to use in the memo.

] Exit editor: Allows you to exit from the memo editor.

• Delete all

After a memo is already input in your phone,

Use this to delete all schedules. You are asked to confirm this

action.

1. Select a memo.

2. Press the left soft key [Select].

3. Press the left soft key [Options].

The following options are available.

] Edit: You can edit the selected memo.

] Delete: Deletes the selected memo.

] Add New: Use this to add a new memo. The phone can store

up to 20 memos and 40 characters for each memo.

] Delete All: Deletes all memos. You are asked to confirm this

action.

5352