LG DV379: Connections (Continued) Connecting to Optional Equipment

Connections (Continued)

Connecting to Optional Equipment

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Pro Logic ll/

Pro Logic

Connect the Left and Right AUDIO OUT jacks on the

DVD Player to the audio left and right in jacks on your

amplifier, receiver, or stereo system, using the audio

cables (A).

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/

Video receiver equipped with a multi-channel

decoder (Dolby Digital™, MPEG 2, or DTS)

Connect one of the DVD Player’s DIGITAL AUDIO

11

OUT jacks (OPTICAL O or COAXIAL X) to the

corresponding in jack on your amplifier. Use an

optional digital (optical O or coaxial X) audio cable.

You will need to activate the player’s digital output.

22

(See “Digital Audio Output” on page 13).

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your DVD Player (MPEG 2,

Dolby Digital and DTS). Check the receiver manual and

the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

Notes

–

If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

– Six Channel Digital Surround Sound via digital con-

nection can only be obtained if your receiver is

equipped with a Digital Multi-channel decoder.

– To see the audio format of the current DVD in the on-

screen display, press AUDIO.

10