Karcher KMR 1250 B: Device elements

Device elements

1 Seat (with seat contact switch)

2 Operator console

3 Lights

4 Right side brush

5 Left side brush

6 Lift/tilt emptying mechanism

7 Waste container

8 Cover

9 Roller brush

10 Bulk waste flap

18 EN

- 3

Operator console

1 Ignition lock

18 Accelerator pedal, reverse

Open/ close device hood

2Choke

19 Horn

3 Motor speed adjustment

Î Tilt the seat towards the front.

20 Steering wheel

4 Raise/lower side-brushes, right

Î Open the device hood at the handle slot

21 Open/ close device hood

5 Upper position: Raise roller brush

(pull it upward).

Central position: Lower roller brush (op-

Note

erating mode "Fine setting")

The device hood is held at the top by the

Lower position: Lower roller brush (op-

gas pressure spring.

erating mode "store in floating position")

6 Raise/lower side-brushes, left (Option)

Colour coding

7 Switch for two-hand operations

– The operating elements for the cleaning

8 Operating hour counter

process are yellow.

9 Lights

– The controls for the maintenance and

10 Raise/lower bulk waste flap

service are light gray.

11 Parking brake/ operating brake

12 Tilt waste container

(Function only in connection with the

two-hand operations switch)

13 Raise waste container

(Function only in connection with the

two-hand operations switch)

14 Lower waste container

(Function only in connection with the

two-hand operations switch)

15 Shake off dust filter

16 Sweep wet/ dry (switch on/off dust suction)

17 Accelerator pedal, forwards

- 4

19EN