LG G1600: Installation

Installation: LG G1600

Installation

1. Inserting the SIM Card

Locate the SIM card socket in the back

of the phone. Follow the steps below to

install the SIM card.

1. Remove the battery if attached.

2. Slide the SIM card into the slot,

under the silvery holders, with the

golden connectors facing down.

2. Removing the SIM Card

Follow the steps below to Remove the

SIM card.

1. Remove the battery if attached.

2. Take out the SIM card from the slot.

Notice

• Removing the battery from the phone whilst it is

switched on may cause it to malfunction.

• The metal contact of the SIM card can be easily

damaged by scratches. Pay special attention to the SIM

card when you handle and install. Follow the

instructions supplied with the SIM card.

Getting Started

17

Installation

3. Installing the Battery

1. Position the lugs on the top of the

battery into the retaining holder.

1

2. Then push the bottom of the battery

2

into position until it clicks.

3. Attach back cover by sliding up into

position until it clicks.

Notice!

When you remove the battery, you

should use both hands.

4. Charging the Battery

To connect the travel adapter to the phone, you must have installed

Getting Started

the battery.

1. With the arrow facing you as shown

in the diagram push the plug on the

battery adapter into the socket on

the bottom of the phone until it

clicks into place.

18

2. Connect the other end of the travel

adapter to the mains socket. Use

only the included packing charger.

Warning

Do not force the connector as this may damage the

phone and/or the travel adapter.

Note

Battery Charging is displayed on the screen after

connecting the travel adapter. Only if the battery is

totally empty, it takes long time to display Battery

Charging .

5. Disconnecting the charger

Disconnect the travel adapter from the

phone by pressing its side buttons as

shown in the diagram.

Getting Started

19

Installation

Note

Ensure the battery is fully charged before using the

phone.

Do not remove your battery or the SIM card while

charging.

The moving bars of battery icon will stop after charging

is complete.

At the beginning of charging or at the moment of

disconnecting the charger from the phone the Sub LCD

backlight will flash red/green.

When charging is complete, it will flash green. Please

note in this case that it may require a longer initial

charging time before displaying Charging on the

screen of the phone.

The charging time depends on the charger and the

battery used.

Note

If the battery does not charge,

switch the phone off.

ensure the battery is correctly fit.

Getting Started

20