Karcher Monobrosse rouleaux BRS 40-1000 C: Transport

- 

3



Open the cover of the fresh water reser-

voir.



Pour in water/detergent mixture. Maxi-

mum temperature of the liquid 50°C



Close the cover of the fresh water res-

ervoir.



Place the push handle vertically and ar-

rest.



Insert the transport wheel axles into the 

borings on the appliance and lock them.



Tilt the appliance to the side and drive it 

to the place of use on its transport 

wheels.

At the site of use:



Press the transport wheel release but-

ton and pull the transport wheel out.



Insert the transport wheels into their 

holder until they stop.



Danger

Check the mains cables of the machine 

each time before using the machine to see 

that it is not damaged.  Never operate a 

machine with damaged cables.  Get the 

damaged cables replaced  by an electri-

cian.

몇

Warning

The highest allowed net impedance at the 

electrical connection point (refer to techni-

cal data) is not to be exceeded.



Insert the end of the extension cable as 

a loop in the strain relief clamp.



Plug in the mains plug.

몇

Warning

Risk of electric shock. Do not let the mains 

cable come in contact with the rotating 

brushes or pads.



Place the slider vertically and arrest.



Push the push handle down and turn it 

to the position indicated above.



Start up the appliance (see "Cleaning") 

and move it forward and  backwards 

over the surface to be processed.



Place the slider vertically and arrest.



Push the push handle down and turn it 

to the position indicated above.



Start the appliance up (see "Cleaing".



Move the appliance to the left: 

Press 

the left side of the push handle down.

Move the appliance to the right:

: 

Press the rlght side of the push handle 

down.



Slide the lock of the push handle up and 

swivel it to a comfortable working 

height.



Turn on the brushes by using the switch 

for the brush drive.



Turn on the brush irrigation by using the 

switch for the detergent solution.



Move the appliance over the surface to 

be processed by the push handle (see 

"Cleaning method").

몇

Caution

Risk of damage to the floor covering. Do 

not operate the appliance on the spot.



Slide the lock of the push handle up and 

swivel it to a comfortable working 

height.



Turn on the brushes by using the switch 

for the brush drive.



Move the appliance over the surface to 

be processed by the push handle (see 

"Cleaning method").

몇

Caution

Risk of damage to the floor covering. Do 

not operate the appliance on the spot.

Note

To polish underneath furniture, the fresh 

water reservoir can be removed.



Release the switch for detergent solu-

tion.



Release the brush drive button.



Place the slider vertically and arrest.



Disconnect the mains plug.



Lift up the fresh water reservoir and car-

ry it to the disposal site.

몇

Warning

Please observe the local provisions regard-

ing the wastewater treatment.



Remove the cover of the fresh water 

reservoir and pour out the liquid via the 

notch.

Caution

Risk of injury and damage! Observe the 

weight of the appliance when you transport 

it.



If you want to transport the appliance on 

a vehicle secure it from slipping.

To reduce the required space, the pushing 

handle can be folded or disassembled:



Release the star grips of the pushing 

handle fastening.



Unscrew the star grips, remove the 

screws and take off the upper push 

handle half.

Application

Detergent

Routine cleaning of all wa-

ter resistant floors

RM 746

RM 780

Routine cleaning of glossy 

surfaces (e.g. granite)

RM 755 es

Routine cleaning and basic 

cleaning of industrial floors

RM 69 ASF

Routine cleaning and basic 

cleaning of fine stoneware 

tiles

RM 753

Routine cleaning of tiles in 

sanitary areas

RM 751

Cleaning and disinfection 

in sanitary areas

RM 732

Removal of coating from 

all alkali-resistant floors 

(e.g. PVC)

RM 752

Removal of coating from li-

noleum floors

RM 754

Driving to the Place of Use

Establish  mains contact

Cleaning method

Move the appliance back and forth.

Move the appliance from side to side

Cleaning

Polishing

Shutting Down the Appliance

Emptying the Fresh Water Reser-

voir

Transport

11 EN