LG G5220C: Access Codes

Access Codes: LG G5220C

Access Codes

Getting Started

You can use the access codes described in this section to avoid

unauthorised use of your phone. The access codes (except PUK1

and PUK2 codes) can be changed by using [Menu 4-5-6].

PIN code (4 to 8 digits)

The PIN (Personal Identification Number) code protects your SIM

card against unauthorised use. The PIN code is usually supplied with

the SIM card. When PIN code request is set Enable, your phone

will request the PIN code every time it is switched on. On the

contrary, when PIN code request is set Disable, your phone

connects to the network directly without the request PIN code.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is required to access

some functions such as Advice of call charge, Fixed Dial number.

These functions are only available if supported by your SIM card.

PUK code (4 to 8 digits)

The PUK(PIN Unblocking Key) code is required to change a blocked

PIN code. The PUK code may be supplied with the SIM card. If not,

contact your local service provider for the code. If you lose the code,

also contact your service provider.

ENGLISH

26

Getting Started

PUK2 code (4 to 8 digits)

The PUK2 code, supplied with some SIM cards, is required to

change a blocked PIN2 code. If you lose the code, also contact your

service provider.

Security code (4 to 8 digits)

The security code protects the unauthorised use of your phone. It is

usually supplied with the phone. This code is required to delete all

phone entries and to activate “Reset settings” menu. The default

number is “0000”.

ENGLISH

27