Karcher K 4 Car: Start up
Start up: Karcher K 4 Car
age regulator match up with the intend-
Fill the suction hose with water.
ed recesses in the casing.
Screw the suction hose into the water
connection of the appliance and insert it
Connect the high pressure hose to the
into the water source (e.g. rainwater
trigger gun
drum).
Illustration
Push the high pressure hose into the
Start up
trigger gun until it locks audibly.
Notice
Note: Make sure the connection nipple
Dry running of more than 2 minutes leads to
is aligned correctly.
damage of the high-pressure pump. If the
Check the secure connection by pulling
appliance does not build up pressure within
on the high pressure hose.
2 minutes, switch the appliance off and pro-
Water supply
ceed in accordance with the instructions in
Chapter "Troubleshooting".
Notice
Illustration
Impurities in the water can damage the
Insert the high pressure hose tightly into
high-pressure pump and the accessories.
the quick coupling on the appliance, it
For protection, the use of the KÄRCHER
will lock in audibly.
water filter (optional accessory, order no.
Note: Make sure the connection nipple
4.730-059) is recommended.
is aligned correctly.
For connection values, see type plate/tech-
Check the secure connection by pulling
nical data.
on the high pressure hose.
Observe regulations of water supplier.
Attach the water supply hose to the
Water supply from mains
coupling on the water connection.
몇 Warning
Note: The supply hose is not included.
According to applicable regulations, the ap-
Connect the water supply hose to the
pliance must never be used on the drinking
water supply.
water net without a system separator. A
Completely open the water tap.
suitable system separator by KÄRCHER or
Insert the mains plug into the socket.
alternatively a system separator according
Turn on the appliance “I/ON”.
to EN 12729 type BA must be used.
Illustration
Water that has flown through a system sep-
Unlock the lever on the trigger gun.
arator is no longer classified as drinking
Pull on the lever of the trigger gun; the
water.
device will switch on.
Notice
Switch the appliance on for a (max. of 2
Always connect the system separator to
minutes) and wait until the water exits at
the water supply, never directly to the appli-
the hand spray gun without bubbles.
ance!
Release the lever on the trigger gun.
Illustration
Note: Release the lever of the trigger
Screw the coupling element to the wa-
gun; the device will switch off again.
ter connection on the appliance.
High pressure remains in the system.
Illustration
Drawing in water from open reservoirs
Lock the lever on the trigger gun.
This high-pressure cleaner is suited to work
with the KÄRCHER suction hose with back-
flow valve (Optional accessory, order no.
4.440-238) to draw in surface water, e.g.
from water butts or ponds (see specifica-
tions for max. suction height).
– 9
19EN
Оглавление
- Bestimmungsgemäße
- Sicherheit
- Gerätebeschreibung
- Vor Inbetriebnahme
- Inbetriebnahme Betrieb
- Transport
- Lagerung Pflege und Wartung
- Zubehör und Ersatzteile
- Technische Daten EG-Konformitätserklärung
- Environmental protection
- Description of the Appliance
- Start up
- Operation
- Transport
- Troubleshooting
- Technical specifications EC Declaration of Conformity
- Оглавление Защита окружающей среды
- Безопасность
- Описание прибора
- Перед началом работы
- Начало работы
- Транспортировка
- Хранение
- Помощь в случае
- Принадлежности и Гарантия запасные детали
- Технические данные Заявление о соответствии ЕС
- Зміст Захист навколишнього середовища
- Безпека
- Опис пристрою
- Введення в експлуатацію Експлуатація
- Транспортування
- Допомога у випадку
- Приладдя й запасні деталі Технічні характеристики
- Заява при відповідність