Karcher K 4 Car: Description of the Appliance

Apply the "Ultra Foam Cleaner TM 615"

Description of the Appliance

cleaner via the foam nozzle only.

These operating instructions describe the

———————————————––––

maximum equipment. Depending on the

Not included in the delivery

model, there are differences in the scopes

24 Plug 'n' Clean detergent bottle with

of delivery (see packaging).

locking lid

Illustrations on fold-out page!

25 Water supply hose

1 Coupling element for water

Use a fabric reinforced water hose with

connection

a commercially available coupling. Min-

2 Quick coupling for high pressure hose

imum diameter 13 mm (1/2 inch); mini-

3 Storage for trigger gun

mum length 7.5 m.

4 Water connection with integrated sieve

Before Startup

5 Appliance switch "0/OFF“/ „I/ON“

6 Dosage regulator for detergent

Attaching the Accessories

7 Storage for trigger gun

8 Transport handle

Illustrations on fold-out page!

9 Storage of Plug 'n' Clean detergent

Mount loose parts delivered with

bottle with detergent connection

appliance prior to start-up.

10 Storage for high pressure hose

Install wheels

11 Storage hook for mains connection

Illustration

cable

 Push the wheels into the intake.

12 Storage for spray lance

 Secure the wheels using the included

13 Mains cable with mains plug

plug. Align the plug properly!

14 Bearing wheel

Install the storage for trigger gun

15 Trigger gun

16 Lock trigger gun

Illustration

17 Key to detach the high pressure hose

 Place the bottom holder into the recess-

from the trigger gun

es and push forward until it audibly

18 High pressure hose

locks in.

19 Spray lance with pressure regulation

 Insert the top holder and push down all

(Vario Power)

the way.

Carrying out the most common cleaning

Install the transport handle

tasks. The work pressure can be stage-

You will need the 2 included screws as well

lessly regulated between "Min" and

as a Phillips screwdriver PH 2.

"Max". You can add detergent when

Illustration

"Mix" is selected.

 Slide the transport handle into the guide

In order to adjust the working pressure,

and secure it with 2 screws.

release the lever of the hand spray gun

Install the dosage regulator for

and turn the spray lance to the desired

detergent

position.

20 Spray lance with Dirtblaster

You will need the 2 included screws as well

For strong contaminations

as a Phillips screwdriver PH 2.

21 Rotary washing brush

Illustration

Suitable for use with detergents.

 Insert both detergent hoses onto the

Especially suitable for cleaning cars.

hose fittings.

22 Foam nozzle with detergent container

 Install the dosage regulator and con-

With powerful foam for effortless clean-

nect using 2 screws.

ing.

Note: During installation you must

23 Ultra Foam Cleaner TM 615

make sure that the tongues of the dos-

18 EN

– 8