Karcher K 4 Compact Car: Description of the Appliance Before Startup

Description of the Appliance Before Startup

Illustrations on fold-out page!

Attaching the Accessories

1 Storage for accessories

2 Transport handle, detachable

Mount loose parts delivered with appliance

3 Quick coupling for high pressure hose

prior to start-up.

4 Appliance switch "0/OFF“/ „I/ON“

Illustrations on fold-out page!

5 Mains cable with mains plug

Illustration

6 Carrying handle

 Screw the coupling element to the wa-

7 Bearing wheel

ter connection on the appliance.

8 Water connection with integrated sieve

Illustration

9 Coupling element for water connection

 Push the high pressure hose into the

10 Detergent suction hose (with sieve)

trigger gun until it locks audibly.

11 Trigger gun

Note: Make sure the connection nipple

12 Lock trigger gun

is aligned correctly.

13 High pressure hose

 Check the secure connection by pulling

14 Key to detach the high pressure hose

on the high pressure hose.

from the trigger gun

Water supply

15 Spray lance with pressure regulation

(Vario Power)

For connection values, see type plate/tech-

Carrying out the most common cleaning

nical data.

tasks. The work pressure can be stage-

Notice

lessly regulated between "Min" and

Impurities in the water can damage the

"Max". You can add detergent when

high-pressure pump and the accessories.

"Mix" is selected.

For protection, the use of the KÄRCHER

In order to adjust the working pressure,

water filter (optional accessory, order no.

release the lever of the hand spray gun

4.730-059) is recommended.

and turn the spray lance to the desired

Water supply from mains

position.

Observe regulations of water supplier.

16 Spray lance with Dirtblaster

몇 Warning

For strong contaminations

According to applicable regulations, the ap-

17 Rotary washing brush

pliance must never be used on the drinking

Suitable for use with detergents.

water net without a system separator. A

Especially suitable for cleaning cars.

suitable system separator by KÄRCHER or

18 Foam nozzle with detergent container

alternatively a system separator according

With powerful foam for effortless clean-

to EN 12729 type BA must be used.

ing.

Water that has flown through a system sep-

19 Ultra Foam Cleaner TM 615

arator is no longer classified as drinking

Apply the "Ultra Foam Cleaner TM 615"

water.

cleaner via the foam nozzle only.

Notice

———————————————––––

Always connect the system separator to

Not included in the delivery

the water supply, never directly to the appli-

20 Water supply hose

ance!

Use a fabric reinforced water hose with

Drawing in water from open reservoirs

a commercially available coupling. Min-

imum diameter 13 mm (1/2 inch); mini-

This high-pressure cleaner is suited to work

mum length 7.5 m.

with the KÄRCHER suction hose with back-

flow valve (Optional accessory, order no.

4.440-238) to draw in surface water, e.g.

– 8

17EN