Karcher HDS-C 9-15 Stal nierdzewna: Accessories

- 

11

German,Order.-Nr.: 5.391-558.0

English, Order no.: 5.391-559.0

French, Order no.: 5.391-560.0

Italian, Order no.: 5.391-561.0

Spanish, Order no.: 5.391-562.0

Portuguese, Order no.: 5.391-563.0

Dutch, Order no.: 5.391-564.0

Greek, Order no.: 5.391-565.0

Polish, Order no.: 5.391-566.0

Best.-Nr.: 6.414-278.0

Best.-Nr.:2.641-310.0

Best.-Nr.: 2.641-320.0

Best.-Nr.: 2.641-297.0

Best.-Nr.: 2.641-333.0

Order no. : 6.288-020.0

Order no. 6.288-050.0

Order no. : 6.288-072.0

Order no. : 6.288-116.0

Order no. : 6.290-911.0

For softening

몇

Warning!

Before using the cleaning agent, please re-

fer to the notice on the package. Do not use 

the following cleaning agents:

–

cleaning agent containing nitrit acid

–

cleaning agent containing active chlo-

rinate

If you use such cleaning agents, it will dam-

age your equipment.

RM 100 ASF

RM 101 ASF

The warranty terms published by our com-

petent sales company are applicable in 

each country. We will repair potential fail-

ures of your appliance within the warranty 

period free of charge, provided that such 

failure is caused by faulty material or de-

fects in fabrication. In the event of a warran-

ty claim please contact your dealer or the 

nearest authorized Customer Service cent-

er. Please submit the proof of purchase.

Faults without display

Fault

Possible cause

Remedy

By whom

Plant is not run-

ning

Mains fuse have got triggered

Check mains fuses and mains voltage

Operator

No pressure 

build-up in the 

plant or pump is 

knocking

Amount of water supply is too low.

Check water supply level (refer to technical data).

Operator

Pipe is blocked

Check all pipes to see that there are no blockages

Operator

System is sucking air

Check system for leaks, the detergent suction hoses 

must lie in the detergent, refill detergent container.

Operator

Only HDS-C 7/11, HDS-C 9/15: Heating 

coil has heavy calcium deposits

Softening using RM 110 is not working. Rectify 

cause, decalcify the plant.

Operator, 

Customer 

Service

Pump leaky 

(more than 3 

drops of water 

per minute)

Defective pump part

Replace defective part.

Customer 

Service

Detergent is not 

taken in

Filter or hose is blocked

Clean the parts.

Operator

Backflow valve stuck

Remove suction hose from pump head and loosen 

the recoil valve using a blunt object.

Operator

Solenoid valve is defective

Replace valve.

Customer 

Service

High pressure 

pump is sucking 

in air.

Detergent container is empty

Refill detergent.

Operator

Only HDS-C 7/

11, HDS-C 9/15: 

Burner does not 

ignite or the flame 

glows off during 

operation

Washing programme with hot water not se-

lected.

Select another washing programme.

Operator

Water shortage

Check water supply, check connections, clean water 

shortage safeguard.

Operator

Fuel filter dirty

Change fuel filter.

Operator

No ignition

Check ignition.

Customer 

Service

Check ignition electrodes.

Customer 

Service

Too low water 

temperature for 

hot water opera-

tions

Temperature has been set too low.

Set the thermostat to a higher level.

Operator

Nozzle in spray pipe is rinsed out. 

Define the quantity to be transported by the pump. 

Replace nozzle if the specifications given in the tech-

nical data are exceeded with a large margin.

Operator

Only HDS-C 7/11, HDS-C 9/15: Heating 

coil has heavy calcium deposits

Softening using RM 110 is not working. Rectify 

cause, decalcify the plant.

Customer 

Service

Only HDS-C 7/11, HDS-C 9/15: Heating 

coil sooted

Remove the soot from the heating coil.

Customer 

Service

Accessories

Attachment sets

Sticker Operating Instructions

Water filter G 1"

Lance holder

Hose switch

Coin acceptor

Coin counter

Fuel

Engine oil Hypoid SAE 90

Engine oil 15W40

Silicon grease

Lock grease

Steel care product

Softener liquid RM 110

Detergent

RM 806 ASF, 1+3

Dosing ml/

min

HDS-C 9/15

120...150

HDS-C 7/11

98...120

HDS-C 8/15-E

110...135

Lime solvent

Warranty

27 EN