Electrolux ZCS2000: English

11

7

6

8

9

3

1

2

1

14

5a

10

5b

4

3

2

1

A

B

English

REPLACING THE DUST BAG, S-bag®

1 

The dust bag, s-bag® must be replaced latest when 

the indicator window is completely red. Read with the 

nozzle lifted up.

2 

Fold down the carrying handle. Press the catches on 

the hose, remove the hose and open the cover.

3 

Lift out the insert holding the s-bag®.

4 

Pull the cardboard to remove the s-bag® from the 

insert. This automatically seals the s-bag® and prevents 

dust leaking out.

5 a   Insert a new s-bag® by pushing the cardboard right 

into the end of the groove in the insert.

5 b  Attach the insert by placing it on the back pegs in the 

bag compartment. Then fold down the insert and close 

the cover.

Note. Replace the s-bag® even if it is not full (it could be 

obstructed). Also replace after vacuuming carpet-cleaning 

powder. Be sure to use only an original Electrolux dust bags, 

s-bag® Classic or s-bag® Clinic.

Replacement of the motor filter (Ref.  No. EF54)

should be done with every 5th replacement of the dust bag, 

s-bag®

6 

Fold down the carrying handle. Press the catches, 

remove the hose and open the front cover.

7 

Lift out the insert holding the s-bag®. 

8  

Pull the motor filter holder upwards until it comes away 

from the groove.

9 

Carefully pull the old, dirty filter out of the filter holder 

and replace it with a new motor filter.

10 

Reattach the filter holder containing the new motor 

filter.

11 

Replace the insert holding the s-bag® and then close 

the cover.

Replacement of the exhaust filter

should be done with every 5th replacement of the dust bag, 

s-bag®

There are three types of exhaust filter:

•  Micro filter* (Ref. No. EF 17)

•  Hepa H12* non washable (Ref. No. EF H12)

•  Hepa H12* washable (Ref. No. EF H12W)

The filters must always be replaced with new ones and 

cannot be washed (except the Hepa H12* washable)

12 

Fold up the carrying handle until it clicks into place.

13 

Place your thumbs on the back edge of the lid and 

then open the lid by pulling the handle backwards and 

upwards with your index/middle finger.

14 

Lift out the filter. Insert a new filter and replace the lid 

as shown.

*Certain models only

12