Electrolux Z3300: English

8

7

6

5

4

3

2

1

13

12

11

10

9

English

GETTING THE BEST RESULTS

Use the nozzles as follows:

Carpets:

 Use the carpet/hard floor nozzle with the lever in 

position (1). Reduce suction power for small carpets.

Hard floors:

 Use the carpet/hard floor nozzle with the 

lever in position (2). If you have a carpet/hard floor nozzle 

with two pedals – press the pedal on the right (3) to 

vacuum up animal hair, etc. more effectively.

Wooden floors:

 Use the parquet nozzle (certain models 

only, 4).

Upholstered furniture:

 Use the combination nozzle as 

shown in (5).

Curtains, lightweight fabrics, etc.:

 Use the combination 

nozzle as shown in (5). Reduce suction power if necessary.

Frames, bookshelves, etc.:

 Use the combination nozzle as 

shown in (6) or Easy clean (7 – certain models only).

Crevices, corners, etc.: 

Use the crevice nozzle (8).

Using the power nozzle

(Requires an Ultra Silencer equipped with a power socket. The 

power nozzle is delivered only with certain models, or could 

be bought as an accessory.)

9  Attach the nozzle to the tube.

10  Connect the power nozzle to the socket on the 

vacuum cleaner.

11  Use the clips to secure the cable along the tubes and 

hose.

12  The power nozzle starts operating when the vacuum 

cleaner is switched on.

Using the turbo nozzle

(certain models only)

13  Attach the nozzle to the tube.

Note: Do not use the power or turbo nozzle on skin rugs, rugs 

with long fringes or a pile depth exceeding 15 mm. To avoid 

damaging the carpet, do not keep the nozzle stationary 

whilst the brush is rotating. Do not pass the nozzle across 

electric cables, and be sure to switch off the vacuum cleaner 

immediately after use.

8

2193277-01.indd   8

7/18/07   4:32:46 PM