Electrolux EHG30235 x: Building In

Building In

R

A

510

290

Fig. 9

Dimensions are given in millimeters

This hob can be inserted in a built-in kitchen unit whose

depth is between 550 and 600 mm. The hob dimensions

are shown in figure 9.

The edge of the cut out must have a minimum distance

from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near

the hob, the cut out edges must have a minimum

distance of 100 mm.

R = Rapid burner

A = Auxiliary burner

Fitting the hob to the worktop

The hob can be installed in a kitchen unit with an opening

for insertion whose dimensions are shown in Fig. 11. To

install the hob, proceed as follows:

1) Place the seals supplied with the hob all around the

edge of the cut out, taking care that the sealings

meet without overlapping.

2) Place the hob in the cut out, taking care that it is

centred.

a

3) Fix the hob with the relevant screws (Fig. 10). The

traction of the screws is able to trace the sealing, any

excess of which can be easily removed.

The edge of the hob forms a double labyrinth seal which

provides a total guarantee against infiltration of liquids.

a) Sealing gasket

Fig. 10

If several 30 cm hob are to be installed side by

side into the same cut out, an assembly kit

including a support side bracket and

supplementary sealings is available at our After

Sales Centres. The relevant installation instructions

are supplied within the kit package.

81