Electrolux EFP60241X: MAINTENANCE

MAINTENANCE

Grease filters

CLEANING METAL CASSETTE GREASE FILTERS

• The filters must be cleaned every 2 months, or more frequently in case

of particularly heavy use of the hood. Filters can be washed in a dish-

washer.

• Pull out the sliding suction panel.

• Remove the filters one by one, after having disconnected the relative

fastening elements.

• Wash the filters, taking care not to bend them. Let them get dry before

refitting them. (The colour of the filter surface may change throughout

the time but this has no influence to the filter efficiency).

• When refitting the filters, make sure that the handle is visible on the

outside.

• Close the sliding suction panel.

Charcoal filter (Recycling version)

REPLACING CHARCOAL FILTERS

Warning: Turn the lights off and wait until the lamps cool down before

you change the odour filter.

• These filters are not washable and cannot be regenerated, and must be

replaced approximately every four months or more frequently by par-

ticularly heavy use.

• Pull out the sliding suction panel.

• Remove the grease filters.

• Remove the saturated carbon filter by releasing the fixing hooks

• Fit the new filter by hooking it into its seating.

• Replace the grease filters.

• Close the sliding suction panel.

Lighting

LIGHT REPLACEMENT

9 W fluorescent lights.

• Remove the metal terminals fixing the glass.

• Slide the glass cover out of one of the fastening clips. Lower the

unfastened part of the glass cover slightly, so that the cover can be

completely removed.

• Replace the light with a new one of the same type and rating.

• Replace the glass cover in reverse order.

9

EN

9