Pioneer VSX-1025-K: Symptom Remedy Remote control Symptom Remedy

Symptom Remedy Remote control Symptom Remedy: Pioneer VSX-1025-K

Table of contents

VSX-1020_SYXCN.book 115 ペー 103月2日 金曜 午9時0分

Additional information 12

Symptom Remedy

English

During playback of DVD-

• This will occur when playing DVD-Audio material over the HDMI connection.

Audio, the display shows

This is not a malfunction.

PCM.

The power turns off

• See the Power section (page 108).

automatically and some

Deutsch

indicator flashes, or some

indicator flashes and the

power does not turn on.

Remote control

Symptom Remedy

Français

Cannot be remote controlled. • Set the remote control unit’s remote control mode so that it matches the

setting on the receiver (see Operating multiple receivers on page 77).

• Check whether the receiver’s remote control mode is properly set (see

Remote Control Mode Setup on page 107).

• Try replacing the batteries in the remote control (see Loading the batteries on

page 8).

Italiano

• Be sure to operate within 7 m and a 30º angle of the remote sensor on the

front panel (see Operating range of remote control unit on page 14).

• Check that there are no obstacles between the receiver and the remote

control.

• Make sure that there is no fluorescent or other strong light shining on to the

Nederlands

remote sensor.

• Check the connections of the CONTROL IN jacks (see Operating other Pioneer

components with this unit’s sensor on page 37).

Other components can’t be

• If the battery ran down, the preset codes may have been cleared. Re-enter the

operated with the system

preset codes.

remote.

• The preset code may be incorrect. Redo the procedure for entering preset

codes.

Español

115

En