Pioneer VSX-1025-K: Basic playback05 Listening to music contents of a Bluetooth wireless technology device with your system

Basic playback05

4 Select ‘

Pairing Bluetooth Device

’, then

Listening to music contents of a

press

ENTER

.

Bluetooth

wireless technology

5 Select the ‘

Passcode

’ setting you want.

device with your system

Select the same passcode as the Bluetooth

1 Press

ADAPTER

on the remote control to

wireless technology device you wish to

3

switch the receiver to

ADAPTER PORT

input.

connect.

• 0000/1234/8888 – Select the passcode

2 Perform the connection operation from

from these options. These are the

the side of the

Bluetooth

wireless technology

passcodes that can be used in most cases.

device to the

Bluetooth

ADAPTER.

• Others – Select to use a passcode other

3 Start playback of music contents stored

than those mentioned above.

on the

Bluetooth

wireless technology device.

This receiver’s remote control buttons can be

6 If you selected

Others

in step 5, enter the

used for basic playback of files stored on

passcode.

4

Bluetooth wireless technology devices.

Use / to select a number and / to

move the cursor.

7 Follow the instructions displayed on the

GUI screen to conduct pairing with the

Bluetooth

wireless technology device.

Switch on the Bluetooth wireless technology

device that you want to make pair, place it near

®

The Bluetooth

word mark and logos are

the receiver and set it to the pairing mode.

registered trademarks owned by Bluetooth

8 Check to see that the

Bluetooth

ADAPTER

SIG, Inc. and any use of such marks by Pioneer

is detected by the

Bluetooth

wireless

Corporation is under license. Other

technology device.

trademarks and trade names are those of their

When the Bluetooth wireless technology device

respective owners.

is connected:

1

CONNECTED appears in the receiver display.

When the Bluetooth wireless technology device

is not connected:

Go back to the passcode setting in step 5. In

this case, perform the connection operation

from the Bluetooth wireless technology device.

9From the

Bluetooth

wireless technology

device list, select

Bluetooth

ADAPTER and

2

enter the Passcode selected in step 5.

54

En

1 The system can display alphanumeric characters only. Other characters may not be displayed correctly.

2 The passcode may in some cases be referred to as “passkey” or PIN code.

3 When the Bluetooth ADAPTER is not plugged into the ADAPTER PORT, NO ADAPTER will be displayed if ADAPTER

PORT input is selected.

4• Bluetooth wireless technology device should be compatible with AVRCP profile.

• Depending on the Bluetooth wireless technology device you use, operation may differ from what is shown in the

remote control buttons.

VSX-1020_SYXCN.book 54 ページ ２０１０年３月１２日　金曜日　午前９時１０分