Pioneer VSX-1025-K: Selecting MCACC presets Choosing the input signal

Listening to your system 06

English

Selecting MCACC presets

Choosing the input signal

•Default setting: MEMORY 1

On this receiver, it is possible to switch the

input signals for the different inputs as

If you have calibrated your system for different

3

1

described below.

listening positions

, you can switch between

settings to suit the kind of source you’re

• Press , then press

SIGNAL SEL

Deutsch

listening to and where you’re sitting (for

to select the input signal corresponding to

example, watching movies from a sofa, or

the source component.

playing a video game close to the TV).

Each press cycles through the options as

follows:

• While listening to a source, press

, then press

MCACC

.

• AUTO – The receiver selects the first

Français

Press repeatedly to select one of the six

available signal in the following order:

2

MCACC presets

. See Data Management on

HDMI; DIGITAL; ANALOG.

page 98 to check and manage your current

• ANALOG – Selects an analog signal.

settings.

• DIGITAL – Selects an optical or coaxial

digital signal.

Italiano

4

• HDMI – Selects an HDMI signal.

5

• PCM – For PCM input signals.

The

receiver selects the first available signal in

the following order: HDMI; DIGITAL.

Nederlands

HDMI is not assigned by default. To select an

HDMI signal, conduct the input setup

procedure (see The Input Setup menu on

page 42).

When set to DIGITAL, HDMI or AUTO (only

selected DIGITAL or HDMI), the indicators

Español

light according to the signal being decoded

(see Display on page 11).

61

En

1 Different presets might also have separate calibration settings for the same listening position, depending on how

you’re using your system. These presets can be set in Automatically conducting optimum sound tuning (Auto MCACC)

on page 39 or Automatic MCACC (Expert) on page 87, either of which you should have already completed.

2 • These settings have no effect when headphones are connected.

• You can also press / to select the MCACC preset.

3 • This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96/24) and WMA9 Pro

digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, WMA9 Pro, PCM (32

kHz to 192 kHz), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio and SACD.

• You may get digital noise when an LD, CD, DVD or BD player compatible with DTS is playing an analog signal. To

prevent noise, make the proper digital connections (page 30) and set the signal input to DIGITAL.

• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your

DVD player.

4 When the HDMI audio output parameter is set to THROUGH, the sound will be heard through your TV, not from this

receiver.

5 • This is useful if you find there is a slight delay before AUTO recognizes the PCM signal on a CD, for instance.

• When PCM is selected, noise may be output during playback of non-PCM sources. Please select another input

signal if this is a problem.

VSX-1020_SYXCN.book 61 ページ ２０１０年３月１２日　金曜日　午前９時１０分