Pioneer VSX-1025-K: HDMI Setup

Control with HDMI function07

6 Select the ‘

Control Mode

’ setting you

HDMI Setup

want.

Choose whether you want to enable HDMI

You must adjust the settings of this receiver as

for all linked functions or the PQLS function

well as the connected Control with HDMI-

only. However, Display Power Off will

compatible components in order to make use

activate the settings set forth in step 7 below.

of the Control with HDMI function. For more

information see the operating instructions for

• ALL – Enabled for all linked functions.

each component.

• PQLS – Enabled only for the PQLS

1 Press , then press

Home Menu

.

function. When PQLS is selected, link

functions other than the PQLS function

2 Select ‘

System Setup

’, then press

ENTER

.

may not work properly. If you wish to use

3 Select ‘

Other Setup

’, then press

ENTER

.

all link functions, select ALL.

7 Select the ‘

Display Power Off

’ setting

you want.

If the TV’s power is turned off while using the

Control with HDMI function, the receiver’s

power is also turned off (all power off

function). This function can be disabled.

• YES – The all power off function is enabled.

The receiver’s power turns off together with

the TV’s power.

This function only works when the input

for a component connected to the

receiver by Control with HDMI is

4 Select ‘

HDMI Setup

’, then press

ENTER

.

selected or when watching the TV.

5 Select the ‘

Control

’ setting you want.

• NO – The all power off function is disabled.

Choose whether to set this unit’s Control with

The receiver’s power is not affected when

HDMI function ON or OFF. You will need to set

the TV’s power is turned off.

it to ON to use the Control with HDMI

function.

8 When you’re finished, press

HOME MENU

.

You will return to the Home Menu.

When using a component that does not

support the Control with HDMI function, set

this to OFF.

• ON – Enables the Control with HDMI

function. When this unit’s power is turned

off and you have a supported source begin

playback while using the Control with

HDMI function, the audio and video

outputs from the HDMI connection are

output from the TV.

• OFF – The Control with HDMI is disabled.

Synchronized operations cannot be used.

When this unit’s power is turned off, audio

and video of sources connected via HDMI

are not output.

64

En

4e.Other Setup

A/V RECEIVER

1. HDMI Setup

2. Volume Setup

3.

Remote Control Mode Setup

4.

Flicker Reduction Setup

5. Pairing Bluetooth Device

Exit Return

VSX-1020_SYXCN.book 64 ページ ２０１０年３月１２日　金曜日　午前９時１０分