Pioneer VSX-1025-K: Speaker Setting

The System Setup and Other Setup menus11

Speaker Setting

• FH – Select LARGE if your front height

speakers reproduce bass frequencies

Use this setting to specify your speaker

configuration (size, number of speakers and

effectively, or select SMALL to send bass

crossover frequency). It is a good idea to make

frequencies to the other speakers or

sure that the settings made in Automatically

subwoofer. If you didn’t connect front

conducting optimum sound tuning (Auto

height speakers, choose NO (the front

MCACC) on page 39 are correct. Note that this

height channel is sent to the front

2

setting applies to all MCACC presets, and

speakers).

cannot be set independently.

• FW – Select LARGE if your front wide

speakers reproduce bass frequencies

1 Select ‘

Speaker Setting

’ from the

effectively, or select SMALL to send bass

Manual SP Setup

menu.

frequencies to the other speakers or

2 Choose the set of speakers that you want

subwoofer. If you didn’t connect front wide

to set, then select a speaker size.

speakers, choose NO (the front wide

Use / to select the size (and number) of

3

channel is sent to the front speakers).

1

each of the following speakers:

• Surr – Select LARGE if your surround

• Front – Select LARGE if your front

speakers reproduce bass frequencies

speakers reproduce bass frequencies

effectively. Select SMALL to send bass

effectively, or if you didn’t connect a

frequencies to the other speakers or

subwoofer. Select SMALL to send the bass

subwoofer. If you didn’t connect surround

frequencies to the subwoofer.

speakers choose NO (the sound of the

• Center – Select LARGE if your center

surround channels is sent to the front

speaker reproduces bass frequencies

speakers or a subwoofer).

effectively, or select SMALL to send bass

• SB – Select the number of surround back

frequencies to the other speakers or

4

speakers you have (one, two or none).

subwoofer. If you didn’t connect a center

Select LARGEx2 or LARGEx1 if your

speaker, choose NO (the center channel is

surround back speakers reproduce bass

sent to the front speakers).

frequencies effectively. Select SMALLx2 or

SMALLx1 to send bass frequencies to the

other speakers or subwoofer. If you didn’t

connect surround back speakers choose

NO.

102

En

VSX-1020_SYXCN.book 102 ページ ２０１０年３月１２日　金曜日　午前９時１０分

1 If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES. Also, the center, surround,

surround back, front height and front wide speakers can’t be set to LARGE if the front speakers are set to SMALL. In

this case, all bass frequencies are sent to the subwoofer.

2 • You can only adjust the front height speakers when Speaker System is set to Normal(SB/FH).

• If the surround speakers are set to NO, the front height speakers will automatically be set to NO.

3 • You can only adjust the front wide speakers when Speaker System is set to Normal(SB/FW).

• If the surround speakers are set to NO, the front wide speakers will automatically be set to NO.

4 • If you selected ZONE 2 or Front Bi-Amp (in Speaker system setting on page 101) you can’t adjust the surround back

settings.

• If the surround speakers are set to NO, the surround back speakers will automatically be set to NO.

• If you select one surround back speaker only, make sure that speaker is hooked up to the left surround back

terminal.