Pioneer VSX-1025-K: Controlling the rest of your system09

Controlling the rest of your system09

With Pioneer components, you don’t need to

Using System off

program the power to switch off in a shutdown

1 Press

MULTI OPERATION

.

sequence (except DVD recorders).

The LED flashes continuously.

5 Repeat steps 3 to 4 to program a

2

Within five seconds,

press

 SOURCE

.

sequence of up to five commands.

The command sequence you programmed will

Programming mode will terminate

run, then all Pioneer components will switch

automatically when the 5 commands are

1

off

, followed by this receiver (switch of all the

entered.

zones becomes off).

•If you press R.SETUP before programming

is completed, commands programmed up

Erasing the settings for the multi-

to that point will be stored.

operation

This erases all the settings programmed in the

Using multi operations

remote control for the multi-operation.

1Press

MULTI OPERATION

.

1 Press and hold

R.SETUP

, then press “8”

The LED flashes continuously.

for three seconds.

The LED flashes continuously.

2

Within five seconds, press

an input

function button that has been set up with a

• To cancel the preset setup mode press

multi operation.

R.SETUP.

The receiver switches on (if it was in standby)

2 Press the input function button

and the programmed multi operation is

containing the program you want to cancel or

performed automatically.

the

 SOURCE

button for three seconds.

If the LED lights for one second, the erasing

has been successfully completed.

82

En

VSX-1020_SYXCN.book 82 ページ ２０１０年３月１２日　金曜日　午前９時１０分

1 In order to avoid accidently switching off a DVD recorder that is currently recording, no DVD recorder power off codes

are sent.