Pioneer VSX-1025-K: Selecting preset codes directly Programming signals from other remote controls

Controlling the rest of your system09

Selecting preset codes directly

Programming signals from other

remote controls

1 Press and hold

R.SETUP

, then press “1”

for three seconds.

If the preset code for your component is not

The LED flashes continuously.

available, or the available preset codes do not

operate correctly, you can program signals

• To cancel the preset setup mode press

from the remote control of another component.

R.SETUP.

This can also be used to program additional

2 Press the input function button for the

operations (buttons not covered in the presets)

1

component you want to control.

after assigning a preset code.

When assigning preset codes to TV CONTROL,

Certain buttons represent operations that

press TV CTRL here.

cannot be learned from other remote controls.

The LED blinks once and flashes continuously.

The buttons available are shown below:

3 Use the number buttons to enter the 4-

digit preset code.

See Preset code list on page 123.

If the LED lights for one second, the setting has

been successfully completed.

When the preset code is fully input, the LED

flashes three times to indicate that the setting

has failed. If this happens, enter the 4-digit

preset code again.

4 Repeat steps 2 through 3 for the other

components you want to control.

To try out the remote control, switch the

component on or off (into standby) by pressing

 SOURCE. If it doesn’t seem to work, select

the next code from the list (if there is one).

5Press

R.SETUP

to exit the preset setup

mode.

1 Press and hold

R.SETUP

, then press “2”

for three seconds.

The LED flashes continuously.

• To cancel the preset setup mode press

R.SETUP.

2 Press the input function button for the

component you want to control.

The LED blinks once and flashes continuously.

78

En

MULTI

SOURCERECEIVER

OPERATION

R.SETUP

BD DVD

DVR/BDR HDMI

CDTV

ADAPTERNET RADIO

iPod

USB TUNER VIDEO TV CTRL

INPUT

SELECT ZONE 2

RECEIVER

MASTER

INPUT

VOLUME

TV CONTROL

CH

VOL

MUTE

1 The remote can store about 120 preset codes from other components (this has been tested with codes of Pioneer

format only).

VSX-1020_SYXCN.book 78 ページ ２０１０年３月１２日　金曜日　午前９時１０分