Pioneer VSX-1025-K: Acoustic Calibration EQ Adjust

The Advanced MCACC menu 10

• Freq / Q / ATT – These are the filter

•The OVER! indicator shows in the display

English

parameters where Freq represents the

if the frequency adjustment is too drastic

frequency you will be targeting and Q is the

and might distort. If this happens, bring

bandwidth (the higher the Q, the narrower

the level down until OVER! disappears

the bandwidth, or range) of the attenuation

from the display.

(ATT, the amount of reduction to the

targeted frequency).

Deutsch

Tip

3 When you’re finished, press

RETURN

.

• Changing the frequency curve of one

You will return to the Manual MCACC setup

channel too drastically will affect the

menu.

overall balance. If the speaker balance

seems uneven, you can raise or lower

Français

Acoustic Calibration EQ Adjust

channel levels using test tones with the

1

•Default setting: ON

/0.0dB (all channels/

TRIM feature. Use / to select TRIM,

bands)

then use / to raise or lower the

Acoustic Calibration Equalization is a kind of

channel level for the current speaker.

room equalizer for your speakers (excluding

3 When you’re finished, press

RETURN

.

the subwoofer). It works by measuring the

Italiano

You will return to the Manual MCACC setup

acoustic characteristics of your room and

menu.

neutralizing the ambient characteristics that

can color the original source material

Acoustic Calibration EQ Professional

(providing a ‘flat’ equalization setting). If you’re

This setup minimizes the unwanted effects of

not satisfied with the adjustment provided in

Nederlands

room reverberation by allowing you to

Automatically conducting optimum sound

calibrate your system based on the direct

tuning (Auto MCACC) on page 39 or Automatic

sound coming from the speakers.

MCACC (Expert) on page 87, you can also

adjust these settings manually to get a

How to use Acoustic Calibration EQ

frequency balance that suits your tastes.

Professional

1 Select ‘

EQ Adjust

’ from the

Manual

Español

If you find that lower frequencies seem overly

MCACC

setup menu.

reverberant in your listening room (i.e. it

sounds ‘boomy’), or that different channels

2 Select the channel(s) you want and adjust

to your liking.

seem to exhibit different reverb characteristics

(when Type A or Type B shown on the

Use / to select the channel.

diagrams on the following applies), select EQ

Use

/

to select the frequency and

/

to

Pro. & S-Wave (or ALL) for the Auto MCACC

boost or cut the EQ. When you’re finished, go

setting in Automatic MCACC (Expert) on

back to the top of the screen and press



to

page 87 to calibrate the room automatically.

return to

Ch

, then use

/

to select the

channel.

93

En

VSX-1020_SYXCN.book 93 ページ ２０１０年３月１２日　金曜日　午前９時１０分

1 When EQ Adjust is selected for an MCACC preset memory where EQ is set to OFF in the AUDIO PARAMETER, EQ

ON is automatically selected.