Pioneer VSX-1025-K: Erasing one of the remote control button settings

Controlling the rest of your system 09

3 Point the two remote controls towards

English

each other, then press the button that will be

Erasing one of the remote

doing the learning on this receiver’s remote

control button settings

control.

This erases one of the buttons you have

The LED blinks once and flashes continuously.

programmed and restores the button to the

• The remote controls should be 3 cm apart.

factory default.

Deutsch

1 Press and hold

R.SETUP

, then press “7”

for three seconds.

The LED flashes continuously.

• To cancel the preset setup mode press

R.SETUP.

Français

2 Press the input function button

4 Press the corresponding button on the

corresponding to the command to be erased,

other remote control that is sending (teaching)

then press

ENTER

.

the signal to this receiver’s remote control.

The LED flashes once.

If the LED lights for one second, the setting has

1

Italiano

been successfully completed.

3 Press and hold the button to be erased

for three seconds.

5 To program additional signals for the

If the LED lights for one second, the erasing

current component repeat steps 3 and 4.

has been successfully completed.

To program signals for another component,

exit and repeat steps 2 through 4.

4 Repeat step 3 to erase other buttons.

Nederlands

6 Press

R.SETUP

to exit the programming

5Press

R.SETUP

to exit the erasing mode.

mode.

Español

79

En

1 • Note that interference from TVs or other devices will sometimes result in the remote control learning the wrong

signal.

• Some commands from other remote controls cannot be learned, but in most cases the remotes just need to be

moved closer together or farther apart.

• If the LED flashes for five seconds, it means the memory is full. See Resetting the input assignment of one of the

input function buttons above to erase a programmed button you’re not using to free up more memory (note that some

signals may take more memory than others).

VSX-1020_SYXCN.book 79 ページ ２０１０年３月１２日　金曜日　午前９時１０分