Pioneer VSX-1025-K: Setting the Video options

Using other functions 08

i. This feature is only available when the connected display supports the automatic audio/video synchronizing capability

English

(‘lipsync’) for HDMI. If you find the automatically set delay time unsuitable, set A. DELAY to OFF and adjust the delay

time manually. For more details about the lipsync feature of your display, contact the manufacturer directly.

j. Only when listening to 2-channel sources in Dolby Pro Logic IIx Music/Dolby Pro Logic II Music mode.

k.Only when listening to 2-channel sources in Neo:6 MUSIC/CINEMA mode.

l. • You can’t use the Virtual Surround Back mode when the headphones are connected to this receiver or when any of

the stereo, Front Stage Surround Advance or Stream Direct modes is selected.

• You can only use the Virtual Surround Back mode if the surround speakers are on and the SB setting is set to NO

Deutsch

or if Front Bi-Amp or ZONE 2 is selected at Speaker System.

• The Virtual Surround Back mode cannot be applied to sources that do not have surround channel information (only

when listening in some formats of Dolby TrueHD, DTS-HD or DTS Express mode).

m.• You can’t use the Virtual Front Height mode when the headphones are connected to this receiver or when any of

the stereo, Front Stage Surround Advance or Stream Direct modes is selected.

• You can only use the Virtual Front Height mode if the surround speakers are on.

• The Virtual Front Height mode cannot be applied to sources that do not have surround channel information (only

Français

when listening in some formats of Dolby TrueHD, DTS-HD or DTS Express mode).

Setting the Video options

There are a number of additional picture

1 Press , then press

VIDEO

settings you can make using the VIDEO

PARAMETER

.

Italiano

PARAMETER menu. The defaults, if not stated,

2Use

/

to select the setting you want

are listed in bold.

to adjust.

Depending on the current status/mode of the

Important

receiver, certain options may not be able to be

selected. Check the table below for notes on

Nederlands

• Note that if an option cannot be selected

this.

on the VIDEO PARAMETER menu, it is

unavailable due to the current source,

3Use

/

to set as necessary.

setting and status of the receiver.

See the table below for the options available

1

for each setting.

4Press

RETURN

to confirm and exit the

Español

menu.

71

En

VSX-1020_SYXCN.book 71 ページ ２０１０年３月１２日　金曜日　午前９時１０分

RECEIVER

Setting What it does Option(s)

a

Converts video signals for output from the MONITOR OUT jacks

ON

V. CONV

(including HDMI OUT connector) for all video types (see page 24).

(Digital Video Conversion)

OFF

b

Specifies the output resolution of the video signal (when video

AUTO

RES

(Resolution)

input signals are output at the HDMI OUT connector, select this

PURE

according to the resolution of your monitor and the images you

480p/576p

wish to watch).

720p

1080i

1080p

1 • All of the setting items can be set for each input function.

• Setting items other than V. CONV can only be selected when V. CONV is set to ON.