Pioneer VSX-1025-K: The System Setup and Other Setup menus 11 Speaker system setting

The System Setup and Other Setup menus 11

1 Select ‘

Manual SP Setup

’, then press

2 Select the speaker system setting.

English

ENTER

.

• Normal(SB/FH) – Select for normal home

See Making receiver settings from the System

theater use with front height speakers in

Setup menu above if you’re not already at this

your main (speaker system A) setup.

screen.

• Normal(SB/FW) – Select for normal home

theater use with front wide speakers in

2 Select the setting you want to adjust.

Deutsch

your main (speaker system A) setup.

If you are doing this for the first time, you may

want to adjust these settings in order:

• Speaker B – Select to use the B speaker

terminals to listen to stereo playback in

• Speaker System – Specifies how you are

another room (see Switching the speaker

using the B speaker terminals (see below).

terminals on page 73).

• Speaker Setting – Specifies the size and

Français

• Front Bi-Amp – Select this setting if

number of speakers you’ve connected

you’re bi-amping your front speakers (see

(page 102).

Bi-amping your speakers on page 22).

• Channel Level – Adjusts the overall

• ZONE 2 – Select to use the surround back

balance of your speaker system (page 103).

terminals for an independent system in

• Speaker Distance – Specifies the distance

another zone (see Using the MULTI-ZONE

Italiano

of your speakers from the listening position

controls on page 73).

(page 103).

3 If you selected

Normal(SB/FH)

,

• X-Curve – Adjusts the tonal balance of

Normal(SB/FW)

, or

Speaker B

in Step 2,

your speaker system for movie soundtracks

select the placement of the surround

(page 104).

speakers.

Nederlands

3 Make the adjustments necessary for each

In a 7.1-channel surround system with

setting, pressing

RETURN

to confirm after

surround speakers placed directly at the sides

each screen.

of the listening position, the surround sound

of 5.1-channel sources is heard from the side.

This function mixes the sound of the surround

Speaker system setting

speakers with the surround back speakers so

Español

•Default setting: Normal(SB/FH)

that the surround sound is heard from

There are several ways you can use the speaker

1

diagonally to the rear as it should be.

terminals with this receiver. In addition to a

• ON SIDE – Select when the surround

normal home theater setup where they are

speakers is positioned right beside you.

used for the front height speakers or front wide

speakers, they can be used for bi-amping the

• IN REAR – Select when the surround

front speakers or as an independent speaker

speaker is positioned obliquely behind you.

system in another room.

4 When ‘

Setting Change?

’ is displayed,

1 Select ‘

Speaker System

’ from the

select

Yes

.

Manual SP Setup

menu.

If No is selected, the setting is not changed.

See Making receiver settings from the System

You will return to the Manual SP Setup menu.

Setup menu on page 100 if you’re not already at

this screen.

101

En

VSX-1020_SYXCN.book 101 ページ ２０１０年３月１２日　金曜日　午前９時１０分

1 Depending on the positions of the speakers and the sound source, in some cases it may not be possible to achieve

good results. In this case, set the setting to ON SIDE or IN REAR.