Pioneer VSX-1025-K: Automatic MCACC (Expert)

The Advanced MCACC menu 10

English

CAUTION

Automatic MCACC (Expert)

If your setup requires more detailed settings

• The test tones used in the Auto MCACC

than those provided in Automatically

Setup are output at high volume.

conducting optimum sound tuning (Auto

1 Select ‘

Auto MCACC

’ from the

MCACC) on page 39, you can customize your

Advanced MCACC

menu, then press

ENTER

.

Deutsch

setup options below. You can calibrate your

If the Advanced MCACC screen is not

system differently for up to six different MCACC

displayed, refer to Making receiver settings

1

presets

, which are useful if you have different

from the Advanced MCACC menu on page 86.

listening positions depending on the type of

source (for example, watching movies from a

2 Select the parameters you want to set.

2

sofa, or playing a video game close to the TV).

Use / to select the item, then use / to

Français

set.

Important

• Auto MCACC – The default is ALL

(recommended), but you can limit the

• Make sure the microphone/speakers are

system calibration to only one setting (to

not moved during the Auto MCACC Setup.

4

save time) if you want.

The available

• Using the Auto MCACC Setup will

5

Italiano

options are ALL, Keep SP System,

overwrite any existing settings for the

Speaker Setting, Channel Level,

3

MCACC preset you select.

Speaker Distance and EQ Pro & S-Wave.

• The screen saver will automatically appear

• EQ Type (only available when the Auto

after five minutes of inactivity.

MCACC Menu above is EQ Pro & S-Wave)

Nederlands

– This determines how the frequency

balance is adjusted.

Español

87

En

VSX-1020_SYXCN.book 87 ページ ２０１０年３月１２日　金曜日　午前９時１０分

1 These are stored in memory and referred to as MEMORY1 to MEMORY6 until you rename them in Data Management

on page 98.

2 You may also want to have separate calibration settings for the same listening position, depending on how you’re

using your system.

3 Except in cases where you are only adjusting one parameter (i.e. channel level) from the Auto MCACC menu (step 2).

4 • When data measurement is taken (after selecting ALL or Keep SP System), the reverb characteristics data (both

before- and after-calibration) that this receiver had been storing will be overwritten. If you want to save the reverb

characteristics data before measuring, connect a USB memory device to this receiver and transfer the data.

• When measurement is taken of data other than SYMMETRY (after selecting ALL or Keep SP System), the data are

not measured after the correction. If you will need to measure after correction data, take the measurement using the

EQ Professional menu in the Manual MCACC setup (page 93).

• The EQ Pro & S-Wave measurement is also taken when Keep SP System or EQ Pro & S-Wave is selected. See

Acoustic Calibration EQ Professional on page 93 for more on this.

• Either effect of Acoustic Calibration EQ Professional and Standing Wave can be switched on and off in the

respective MCACC preset. For details, see Setting the Audio options on page 68.

5The Keep SP System option allows you to calibrate your system while leaving your current speaker setting (page 102)

unchanged.