Asus WL-160W: Status - IP Cong Status - Ping

Quick Start Guide

Status - IP Cong

IP Config tab shows all the current

host and WLAN Adapter information

including host name, DNS servers,

English

IP address, subnet mask and default

gateway.

Button

IP Release

- If you want to remove the

current IP address, click this button to

release the IP address from DHCP server.

IP Renew

- If you want to obtain a new IP address from DHCP server, click this

button to renew the IP address.

Ping

- Click this button to open “Ping” tab which is used to ping the devices in

your network.

NOTE: The IP Release and IP Renew buttons can only be used on the

WLAN Adapter which gets IP address from DHCP server.

Status - Ping

Click the "Ping" button in Status-IP

Cong tab to open this page. The Ping

tab allows you to verify the accessibility

of other computers or network devices.

To ping a connection:

1. Type the IP address of the device you

want to verify in the IP Address eld.

2. Configure the ping ses sion by

assigning the ping packet size and

number of packet to send, and the timeout value (in milliseconds).

3. Click the “Ping” button.

During the ping session, the Ping button changes into a Stop button. To cancel

the ping session, click the “Stop” button.

The session eld displays information on the veried connection including the

roundtrip time (minimum, maximum, and average) and packets sent, received,

and lost after a ping session.

Click the “Clear” button to clear the session eld.

ASUS WLAN Adapter 11