Zanussi FLS 802: Operating Sequence

Operating Sequence: Zanussi FLS 802

Operating Sequence

i

Before your first wash, we recommend

that you run a cotton cycle at 60°C, without

any laundry in the machine, to remove any

manufacturing residue from the drum and

tub.

Pour 1/2 a measure of detergent into the

dispenser drawer and start the machine.

1. Load the laundry

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

Do not overload the washing machine, but always try

to use it utmost capacity in accordance with the type of

fabric. Reduce the quantity when washing very dirty or

fluffy laundry.

2. Measure out t he detergent

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent recommended by

the manufacturer in a graduated cup and pour it into the

main wash compartment .

If you wish to carry out a prewash (*), pour detergent

into the appropriate compartment marked .

(*) Prewash is available in programme “1”.

3. Measure out t he addit ive

If you wish to use additives enter the softener in the

compartment with the symbol

.

Never exceed the MAX level

4. Select t he required opt ion(s)

6

P0004

AL025

AL023

5. Select t he t emperat ure

Turn the dial to the desired temperature.

ENGLISH

6. Select t he required programme

Turn the programme selector dial CLOCKWISE to the

required programme.

7. St art t he machine

Before starting up the machine check that:

the appliance is plugged in

the water supply tap is turned on

the door and the detergent dispenser drawer are

closed.

Pull the programme selector selector dial outwards, the

operating pilot light will illuminate and the machine will

start operating.

8. At t he end of t he programme

The machine stops automatically and the operating pilot

light goes out.

The door is controlled by a safety device which releases

3 minutes after the end of the programme.

Before opening the door ensure there is no water in

the drum.

Switch the machine off by depressing the programme

selector dial.

When the programme has finished, you are advised to

unplug the appliance and turn off the water tap.

Leave the door open to prevent the formation of mildew

and unpleasant smells.

7

2

P0215

2

P0216

90

P0345