Zanussi ZHC7141: USE - MAINTENANCE

11

USE - MAINTENANCE

USE

The cooker hood functions are controlled by a series of slider or push button switches mounted

on the front of the hood and control the worktop lighting and fan motor speeds. This cooker hood

will not remove steam.

1) SLIDER SWITCHES (fig.11):

- A switch controls the wotktop lighting - ON/OFF.

- A switch controls the fan speeds - OFF/ON-1-2-3.

- The red neon lamp illuminates when the motor is switched ON .

MAINTENANCE

N.B. Before carring out any kind of maintenance, cleaning or replacing lamps, disconnect the

hood from the mains supply.

1. Lighting

40 W incandescent light (fig.10):

• Remove the metal grease filters.

• Unscrew the bulbs and replace them with new ones having the same characteristics.

• Replace the metal grease filters.

2. Filters

ATTENTION- There could be a possible fire hazard if the filters are not replaced ac-

cording to these instructions.

- The metal grease filter should be cleaned every two months or more frequently if the hood is

used consistently and can be cleaned in a dishwasher or by hand using a mild detergent or

liquid soap. When replacing, ensure that they are dry.

- The charcoal filter cannot be washed and should be replaced at least every 2 months or more

frequently if the hood is used consistently.

3. Cleaning

When cleaning the hood, it is recommended to use a damp cloth and mild liquid household

cleaner. Never use abrasive cleaning materials.

ATTENTION: The manufacturer declines all responsibility for any damage or injury caused

as a result of not following the instructions for installation, for maintenance and replacement

times of filters indicated (in order to avoid a possible risk of fire when the filters are saturated

with grease).