Pioneer KRL-46V: Controlling other equipment using the supplied remote control unit Presetting manufacture codes Manufacture codes STB DVD

Introduction

Controlling other equipment using

the supplied remote control unit

Using the supplied remote control unit, you can control

other equipment in connection: a set-top box (STB),

DVD player, DVD/HDD recorder (DVR), BD player or

VCR.

Before using this function, you need to preset the

supplied remote control unit with the manufacture

code of the equipment to be controlled. When you

then want to control the equipment, press S

ELEC

T

on the remote control unit to select an appropriate

mode depending on the equipment; the selection is

switched among TV,

STB, DVD/DVR, and VCR. The

corresponding mode indicators on the remote control

unit show the currently selected mode.

NOTE

When you control a BD player, select the DVD/DVR

mode.

Presetting manufacture codes

Press SELECT on the remote control unit

to select the STB, DVD/DVR, or VCR mode

depending on the equipment.

After confirming that the indicator of the

previously selected mode goes off, press and

hold S

ELEC

T, and then press 1 on the remote

control unit.

The corresponding mode indicator flashes.

Press 0–9 to enter a three-digit manufacture

code.

See the manufacture code list to identify an

appropriate code. The mode indicator lights up

for approximately one second and then goes off;

presetting the manufacture code is completed.

NOTE

•

If you perform no operation for approximately one

minute while a mode indicator is flashing, the code

presetting procedure is quitted.

•

If you enter a code not listed in the table, a mode

indicator flashes quickly for approximately one

second and then flashes as before.

•

To quit the code presetting procedure halfway

while a mode indicator is flashing, you may press

S

ELEC

T on the remote control unit.

•

The factory default manufacture codes for the STB,

DVD/DVR, and VCR modes are “000”, “100”, and

“500” respectively.

Manufacture codes

*

You may not be able to control some equipment

in the tables partially or entirely with the supplied

remote control unit.

STB

000 PIONEER 1 (factory default)

001 PIONEER 2

002 CANAL SATELLITE

•

003 HUMAX

004 PACE 1

005 PACE 2

006 QUALI-TV

1

007 SKY DIGITAL

DVD

2

100 PIONEER 1 (factory default)

101 PIONEER 2

102 AKAI

•

103 DENON

3

104 HITACHI

•

105 JVC

106 KENWOOD 1

107 KENWOOD 2

108 PANASONIC 1

109 PANASONIC 2

110 PHILIPS 1

111 PHILIPS 2

112 SAMSUNG

113 SHARP

114 SONY 1

115 SONY 2

116 SONY 3

117 THOMSON

118 TOSHIBA

119 YAMAHA

4

KRL46V_GB.indd 4 2008/07/09 14:08:33