Pioneer KRL-46V: Analogue channel settings

Basic adjustment

Skip

Analogue channel settings

Channels with “Skip” set to “On” are passed over

when using Pk/l even if selected while watching the

Setup

image from the TV.

Programme Setup

Decoder

When connecting a decoder to the TV, you need to

select “INPUT1” or “INPUT2”.

Analogue Setting

You can reconfigure the analogue TV channels settings

NOTE

automatically or manually.

The factory preset value is “Off”.•

Lock

E

Additional Search

You can block the viewing of any channel.

Use this menu to add new channels automatically after

auto installation has been made.

NOTE

•

Start searching channels after selecting the colour system

•

See “Child Lock” for setting a PIN.

and sound system.

•

When “Lock” is set to “On” for a channel, “Child lock has

E

Manual Adjust

been activated” displays, and the image and sound of the

channel are blocked.

Use this menu to set up analogue TV channels

•

When pressing 6 while “Child lock has been activated”

manually.

displays, the PIN input window will display. Inputting the

After selecting “Yes” on the screen, press a/b/

correct PIN unlocks the “Child Lock” temporarily until the

power is turned off.

c/d to select the channel you want to set and

then press ENTER.

E

Sort

Fine

Channel positions can be sorted freely.

You can adjust the frequency to the desired position.

1

Press c/d to select “Yes”, and then press

ENTER.

NOTE

2

Press a/b/c/d to select the channel you

•

Adjust while checking the background picture as a

reference.

want to move, and then press ENTER.

•

Instead of pressing c/d to adjust the frequency, you

3

Press a/b/c/d to move it to the desired

can set by directly entering the frequency number of the

position, and then press ENTER.

channel with 0–9 numeric buttons.

4

Repeat steps 2 and 3 until all desired channels

EXAMPLE

are sorted.

•

179.25 MHz: Press 1 s 7 s 9 s 2 s 5.

E

Erase Programme

•

49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.

Channels can be erased individually.

Colour sys.

1

Press c/d to select “Yes”, and then press

Select the optimum colour system to receive (“Auto”,

ENTER.

“PAL”, “SECAM”).

2

Press a/b/c/d to select the channel you

Sound sys. (Broadcasting systems)

want to erase, and then press ENTER.

Select the optimum sound systems (Broadcasting

•

A message window pops up.

systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).

3

Press c/d to select “Yes”, and then press

ENTER to erase the selected channel. All the

Label

subsequent channels move up.

When a TV channel sends its Network Name, the

4

Repeat steps 2 and 3 until all desired channels

“Auto Installation” detects the information and assigns

are erased.

a name to it. However, you can change channel names

individually.

1

Press a/b/c/d to select each character of

the new name for the channel, and then press

ENTER.

2

Repeat step 1 above until the name is fully spelt

out.

NOTE

•

The name can be five characters or less.

•

If a channel name is less than five characters, select “END”

to set the channel name.

33

KRL46V_GB.indd 33 2008/07/09 14:09:02