Asus V2-PH1: Installing storage drives
Installing storage drives: Asus V2-PH1
Table of contents
- Front panel features Rear panel features
- Internal components Selecting the voltage
- Removing the side cover and front panel assembly Installing a CPU
- To install a CPU:
- English
- Installing the CPU fan and heatsink assembly
- Installing a DIMM Installing an expansion card
- Installing storage drives
- Removing the bay covers and reinstalling the front panel assembly and side cover
Installing storage drives
Optical drive
Optical driveOptical drive
Optical driveOptical drive
1. Place the chassis upright, then
2
remove the upper 5.25” drive
English
bay metal plate cover.
3
3
2. Insert the optical drive to the
bay, then carefully push the
drive until its screw holes align
with the holes on the bay.
3. Secure the optical drive with two
screws on both sides of the bay.
4. Connect the audio (A), IDE (B),
and power (C) plugs to
CC
CC
C
connectors at the back of the
drive.
AA
AA
A
BB
BB
B
Floppy disk drive
Floppy disk driveFloppy disk drive
Floppy disk driveFloppy disk drive
1. Place the chassis upright, then
remove the lower 3.5” drive bay
metal plate cover.
2. Insert the floppy disk drive to
3
the bay, then carefully push the
3
drive until its screw holes align
2
with the holes on the bay.
3. Secure the floppy disk drive with
two screws on both sides of the
bay.
BB
BB
B
4. Connect the signal (A) and
power (B) plugs to connectors
AA
AA
A
at the back of the drive.
Hard disk drive
Hard disk driveHard disk drive
Hard disk driveHard disk drive
1. Place the chassis upright, then
remove the upper 3.5” drive bay
metal plate cover.
3
2. Insert the hard disk drive to the
bay, then carefully push the
3
2
drive until its screw holes align
with the holes on the bay.
3. Secure the hard disk drive with
two screws on both sides of the
bay.
Quick installation guideQuick installation guide
Quick installation guideQuick installation guide
Quick installation guide
99
99
9
