Asus P5W: 3.2.2 Failure to boot-up; No screen display 3.2.3 Failure to enter the operating system

3.2.2 Failure to boot-up; No screen display 3.2.3 Failure to enter the operating system: Asus P5W

3.2.2 Failure to boot-up; No screen display

English

Mostboot-upfailureandnoscreendisplayresultfromdevicedefectionorincorrect

installation.Followtheinstructionsbelowtoxtheproblem.

1. Makesuretheallthepowercablesareattached,includingthesystemand

the monitor.

2. Make sure if the problem comes from expansion devices.

• Removealltheexpansioncardanddevices.Useonlymotherboard,

monitor,VGAcard,memeorymodules,powersupplyunit,heatsinkand

fan,keyboard,andmousetorebootthesystem.

• Ifthesystemisworkingnormally,itisoneoftheexpansiondevicesthat

causestheproblem.Reinstalltheexpansiondevicesyouremovedback

tothesystemonebyoneandndoutthedefectivedevice.

3. Makesureiftheproblemcomesfromthebasicsystemdevices.

• Ifyouhavesomesparedevices,youcanreplacethedevicesinturn

tondoutthedefectivedeviceintheorderof“memorymodule,CPU,

motherboard,hard/opticaldiskdrive,keyboard/mouse.”

Whenyoundoutthedefectivedevice,contactyourdeviceretailerforservice.

3.2.3 Failure to enter the operating system

1. Iftheproblememergesafteryouaddahardware.Removethenewadded

hardwareandrebootthesystem.Ifthesystemisworkingnormallywithout

thehardware,thedevicemaybedefectiveorincompatibletothesystem.

Contact the device retailer for help.

2. Iftheproblememergesafteryouinstallasoftwareordriver.Followthe

instructionsbelowtoxtheproblem.

a. Entertheoperatingsysteminsafemodeandremovethesoftwareor

driver.

b. Contacttheoperatingsystemcompanyforfurthersupport.

c. Ifthepreviousinstructionsfailtoxtheproblem,youmayneedtoformat

yourharddiskdriveandreinstallanewoperatingsystem.

3. IftheproblememergesafteryouchangetheBIOSsettings,rebootandenter

the BIOS to load the setup defaults. Refer the motherboard user guide for

details.

36

Chapter3: Troubleshooting