Kenwood MG470: Recording onto TAPE

Recording onto TAPE

4

Start playing the source to be re-

The tape deck of the system can record any

music source including CD and radio.

corded.

7

STOP

VOLUME /

To stop recording :

AUX

4

4

MULTI-CONTROL

Press the 7STOP key.

To let recording pause :

When the TAPE REC key is pressed during

MENU

recording, recording pauses after leaving a

no-sound section of 4 seconds. To resume

APE T

recording from record-pause mode, press

the TAPE REC key again.

TAPE REC

CD

6

SET

MD

6

Tip for recording CD or MD onto

TAPE

23

TUNER FM

/AM

tape

When the cassette deck is put to record-

pause mode, the start of tape recording can

Main unit only

be started in synchronism with the start of

playback of the CD or MD source. (Sync re-

1

Make preparation for recording.

cording)

See steps 1 and 3 to 5 of "Recording

(1) Put the CD player or MD recorder of

CD onto TAPE" (pages 22 & 23).

the system to pause (play-pause)

mode.

(2) Select the track to be recorded first

2

Select the source to be recorded.

by pressing the 4 or ¢ key.

CD : Press the CD 6 key.

The CD player or MD recorder enters

MD : Press the MD 6 key.

pause (play-pause) mode at the be-

Radio : Press the TUNER FM/AM key.

ginning of the selected track.

(3) Press the TAPE REC key twice. The

AUX component : Press the AUX key.

cassette deck enters record-pause

If a CD or MD has already been loaded

mode after leaving a no-sound sec-

in advance, it starts to be played auto-

tion of 4 seconds.

matically now. press the 7STOP key

(4) Start playback of the CD or MD.

to stop it.

3

When the source to be recorded

is ready, press the TAPE REC key.

÷ The cassette deck of the system is capable

Example : Recording CD onto TAPE

STEREO

of recording only the normal (TYPE I) tapes.

High (TYPE II) and metal (TYPE IV) position

tapes cannot be used.

EX. BASS

CD

Tape recording indicator

EN

38