Kenwood DPX-5000BT: инструкция

DPX-7000DAB

DPX-5000BT

DUAL DIN SIZED CD RECEIVER

INSTRUCTION MANUAL

DUALER DIN-GENORMTER CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-РЕСИВЕР РАЗМЕРА 2DIN

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

ПРИЙМАЧ CD ПОДВІЙНОГО DIN-РОЗМІРУ

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

B5A-0911-00 (EN)© 2015 JVC KENWOOD Corporation

JS_KWD_DPX_7000DAB_EN_C00_1.indd 1JS_KWD_DPX_7000DAB_EN_C00_1.indd 1 26/10/2015 10:28:27 AM26/10/2015 10:28:27 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

For Israel

Information on Disposal of Old Electrical and Electronic Equipment and Batteries

(applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as

household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of

For Turkey

handling these items and their waste byproducts.

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin

Contact your local authority for details in locating a recycle facility nearest to you. Proper

Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

recycling and waste disposal will help conserve resources whilst preventing detrimental effects

on our health and the environment.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün

Notice:

The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien

atılamaz.

(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist

dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye

darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf,

en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara

sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten

müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve

und batterien abgegeben werden muss.

çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und

yardımcı olacaktır.

die Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere

Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den

kommunalen Entsorgungsbetrieben.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei

enthalt.

i

JS_KWD_DPX_7000DAB_EN_S00_1.indd iJS_KWD_DPX_7000DAB_EN_S00_1.indd i 26/10/2015 10:28:40 AM26/10/2015 10:28:40 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок

службы (годности) данного товара “по истечении которого он может представлять

опасность для жизни, здоровья потребителя, причинять вред его имуществу или

The marking of products using lasers

окружающей среде” составляет семь (7) лет со дня производства. Этот срок является

The label is attached to the chassis/case and says that the component uses laser beams that

временем, в течение которого потребитель данного товара может безопасно им

have been classified as Class1. It means that the unit is utilizing laser beams that are of a

пользоваться при условии соблюдения инструкции по эксплуатации данного товара,

weaker class. There is no danger of hazardous radiation outside the unit.

проводя необходимое обслуживание, включающее замену расходных материалов и/или

соответствующее ремонтное обеспечение в специализированном сервисном центре.

Kennzeichnung von Geräten mit Laser-Abtastern

Дополнительные косметические материалы к данному товару, поставляемые вместе с

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente

ним, могут храниться в течение двух (2) лет со дня его производства.

Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf

hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören.

Срок службы (годности), кроме срока хранения дополнительных косметических

Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche

материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других

Strahlungen außerhalb des Geräts besteht.

прав потребителя, в частности, гарантийного свидетельства KENWOOD, которое он может

получить в соответствии с законом о правах потребителя или других законов, связанных

с ним.

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует

лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження

слабой интенсивности. Они не представляют опасности и не распространяют опасную

Використання деяких Небезпечних Речовин в електричному та електронному

радиацию вне устройства.

обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких

Маркування виробів, обладнаних лазером

Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє

лазерні промені Класу 1. Це означає, що даний апарат використовує лазерні промені

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

слабшого класу. За межами даного апарату не існує небезпеки лазерного випромінювання.

1. свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на

мільйон;

2. кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на

мільйон;

3. ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на

мільйон;

4. шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до

1000 частин на мільйон;

5. полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000

частин на мільйон;

6. полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації

до 1000 частин на мільйон.

ii

JS_KWD_DPX_7000DAB_EN_S00_1.indd iiJS_KWD_DPX_7000DAB_EN_S00_1.indd ii 26/10/2015 10:28:40 AM26/10/2015 10:28:40 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Декларація про відповідність вимогам Директиви R&TTE 1999/5/EC

Декларація про відповідність вимогам Директиви EMC

Декларація про відповідність вимогам Директиви RoHS 2011/65/EU

Виробник:

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC

JVC KENWOOD Corporation

Declaration of Conformity with regard to the EMC Directive

3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Представник у ЕС:

Manufacturer:

JVCKENWOOD NEDERLAND B.V.

JVC KENWOOD Corporation

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVCKENWOOD NEDERLAND B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Konformitätserklärung in Bezug auf die R&TTE-Vorschrift 1999/5/EC

Konformitätserklärung in Bezug auf die EMC-Vorschrift

Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

JVCKENWOOD NEDERLAND B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Декларация соответствия относительно Директивы 1999/5/EC R&TTE

Декларация соответствия относительно Директивы Электромагнитная

совместимость

Декларация соответствия относительно Директивы 2011/65/EU об ограничении

содержания вредных веществ

Производитель:

ДжейВиСи КЕНВУД Корпорейшн

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония

Представительство в EC:

ДжейВиСиКЕНВУД Нидерланд Би.Ви.

Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды

iii

JS_KWD_DPX_7000DAB_EN_S00_1.indd iiiJS_KWD_DPX_7000DAB_EN_S00_1.indd iii 26/10/2015 10:28:40 AM26/10/2015 10:28:40 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

English

Português

Ελληνικά

Hereby, JVC KENWOOD declares that this unit DPX-7000DAB/

JVC KENWOOD declara que este DPX-7000DAB/ DPX-5000BT está

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ JVC KENWOOD ΔΗΛΩΝΕΙ ΟΤΙ DPX-7000DAB/

DPX-5000BT is in compliance with the essential requirements

conforme com os requisitos essenciais e outras disposições da

DPX-5000BT ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ

and other relevant provisions of Directive 1999/5/EC.

Directiva 1999/5/CE.

ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ

Français

Polska

1999/5/EK.

Par la présente JVC KENWOOD déclare que l’appareil

JVC KENWOOD niniejszym oświadcza, że

DPX-7000DAB/

Eesti

DPX-7000DAB/ DPX-5000BT est conforme aux exigences

DPX-5000BT

spełnia zasadnicze wymogi oraz inne istotne

Sellega kinnitab JVC KENWOOD, et see DPX-7000DAB/

essentielles et aux autres dispositions pertinentes de la directive

postanowienia dyrektywy 1999/5/EC.

DPX-5000BT vastab direktiivi 1999/5/EC põhilistele nõudmistele

1999/5/CE.

Český

ja muudele asjakohastele määrustele.

Par la présente, JVC KENWOOD déclare que ce DPX-7000DAB/

JVC KENWOOD tímto prohlašuje, že tento DPX-7000DAB/

Latviešu

DPX-5000BT est conforme aux exigences essentielles et aux

DPX-5000BT je ve shode se základními požadavky a dalšími

Ar šo, JVC KENWOOD, apstiprina, ka

DPX-7000DAB/ DPX-5000BT

autres dispositions de la directive 1999/5/CE qui lui sont

príslušnými ustanoveními smernice 1999/5/ES.

atbilst Direktīvas 1999/5/EK galvenajām prasībām un citiem tās

applicables.

Magyar

nosacījumiem.

Deutsch

Alulírott, JVC KENWOOD, kijelenti, hogy a jelen

DPX-7000DAB/

Lietuviškai

Hiermit erklärt JVC KENWOOD, dass sich dieser DPX-7000DAB/

DPX-5000BT

megfelel az 1999/5/EC irányelvben meghatározott

Šiuo, JVC KENWOOD, pareiškia, kad šis DPX-7000DAB/

DPX-5000BT in Übereinstimmung mit den grundlegenden

alapvető követelményeknek és egyéb vonatkozó előírásoknak.

DPX-5000BT atitinka pagrindinius Direktyvos 1999/5/EB

Anforderungen und den anderen relevanten Vorschriften der

Svenska

reikalavimus ir kitas svarbias nuostatas.

Richtlinie 1999/5/EG befindet. (BMWi)

Härmed intygar JVC KENWOOD att denna DPX-7000DAB/

Malti

Hiermit erklärt JVC KENWOOD die Übereinstimmung des

DPX-5000BT stär l överensstämelse med de väsentliga

Hawnhekk, JVC KENWOOD, jiddikjara li dan DPX-7000DAB/

Gerätes DPX-7000DAB/ DPX-5000BT mit den grundlegenden

egenskapskrav och övriga relevanta bestämmelser som framgår

DPX-5000BT jikkonforma mal-ħtiġijiet essenzjali u ma

Anforderungen und den anderen relevanten Festlegungen der

av direktiv 1999/5/EG.

provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Richitlinie 1999/5/EG. (Wien)

Suomi

Українська

Nederlands

JVC KENWOOD vakuuttaa täten että

DPX-7000DAB/ DPX-5000BT

Компанія JVC KENWOOD заявляє, що цей виріб DPX-7000DAB/

Hierbij verklaart JVC KENWOOD dat het toestel DPX-7000DAB/

tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja

DPX-5000BT відповідає ключовим вимогам та іншим

DPX-5000BT in overeenstemming is met de essentiële eisen en

sitä koskevien direktiivin muiden ehtojen mukainen.

пов’язаним положенням Директиви 1999/5/EC.

de andere relevante bepalingen van richtlijn 1999/5/EG.

Bij deze verklaat JVC KENWOOD dat deze DPX-7000DAB/

Slovensko

Turkish

DPX-5000BT voldoet aan de essentiële eisen en aan de overige

S tem JVC KENWOOD izjavlja, da je ta DPX-7000DAB/

Bu vesileyle JVC KENWOOD, DPX-7000DAB/ DPX-5000BT

relevante bepalingen van Richtlijn 1999/5/EC.

DPX-5000BT v skladu z osnovnimi zahtevami in ostalimi

ünitesinin, 1999/5/EC Direktifinin başlıca gereksinimleri ve diğer

ustreznimi predpisi Direktive 1999/5/EC.

ilgili hükümleri ile uyumlu olduğunu beyan eder.

Italiano

Con la presente JVC KENWOOD dichiara che questo

Slovensky

Русский

DPX-7000DAB/ DPX-5000BT è conforme ai requisiti essenziali

Spoločnosť JVC KENWOOD týmto vyhlasuje, že DPX-7000DAB/

Настоящим, JVC КЕНВУД декларирует, что это устройство

ed alle altre disposizioni pertinenti stabilite dalla direttiva

DPX-5000BT spĺňa zákldné požiadavky a ďalšie prislušné

“DPX-7000DAB/ DPX-5000BT” соответствует необходимым

1999/5/CE.

ustanovenia Direktĺvy 1999/5/EC.

требованиям и другим важным положениям директивы

Dansk

1999/5/EC.

Español

Por medio de la presente JVC KENWOOD declara que el

Undertegnede JVC KENWOOD erklærer harved, at følgende

Україна

DPX-7000DAB/ DPX-5000BT cumple con los requisitos esenciales

udstyr DPX-7000DAB/ DPX-5000BT overholder de væsentlige

Цим, JVC KENWOOD декларує, що цей виріб “DPX-7000DAB/

y cualesquiera otras disposiciones aplicables o exigibles de la

krav og øvrige relevante krav i direktiv 1999/5/EF.

DPX-5000BT” Відповідає суттєвим вимогам та іншим

Directiva 1999/5/CE.

відповідним пунктам Директиви 1999/5/EC.

iv

JS_KWD_DPX_7000DAB_EN_S00_1.indd ivJS_KWD_DPX_7000DAB_EN_S00_1.indd iv 26/10/2015 10:28:41 AM26/10/2015 10:28:41 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CONTENTS BEFORE USE

BEFORE USE 2

IMPORTANT

• To ensure proper use, please read through this manual before using this product. It is especially important

BASICS 3

that you read and observe Warning and Caution in this manual.

• Please keep the manual in a safe and accessible place for future reference.

GETTING STARTED 4

1 Select the display language

Warning

and cancel the demonstration

Do not operate any function that takes your attention away from safe driving.

2 Set the clock and date

3 Set the initial settings

Caution

DIGITAL RADIO

Volume setting:

(for )

6

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of

ANALOG RADIO 8

the output level.

General:

AUX 10

• Avoid using the external device if it might hinder safe driving.

•

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

CD / USB / iPod / ANDROID 10

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short

circuit.

BLUETOOTH® 13

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to

evaporate.

AUDIO SETTINGS 19

• Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the

antenna control wire connected (



31

). Turn off the unit or change the source to STANDBY when parking at

DISPLAY SETTINGS 21

a low ceiling area.

TROUBLESHOOTING 22

REFERENCES 25

How to read this manual

Maintenance

• Operations are explained mainly using buttons on the faceplate of .

More information

• English indications are used for the purpose of explanation. You can select the display language from the

[

FUNCTION

] menu. ( 

5

)

SPECIFICATIONS 26

• [

XX

] indicates the selected items.

INSTALLATION /

• (



XX

) indicates references are available on the stated page.

CONNECTION 28

2

JS_KWD_DPX_7000DAB_EN_EN_2.indd 2JS_KWD_DPX_7000DAB_EN_EN_2.indd 2 3/11/2015 10:28:42 AM3/11/2015 10:28:42 AM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BASICS

Faceplate

Display windowLoading slot

Lights up when

Bluetooth connection is

established. (



13

)

Volume knobReset button

Flashes when the unit

Press twice within

enters searching status.

5seconds.

To On the faceplate

Turn on the power

Press

.

• Press and hold to turn off the power.

Adjust the volume Turn the volume knob.

Select a source

Press

repeatedly.

Change the display information Press DISP repeatedly. (



26

)

ENGLISH

3

JS_KWD_DPX_7000DAB_EN_EN_2.indd 3JS_KWD_DPX_7000DAB_EN_EN_2.indd 3 4/11/2015 2:36:41 PM4/11/2015 2:36:41 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

GETTING STARTED

2

Set the clock and date

1

Press the volume knob to enter [

FUNCTION

].

2 Turn the volume knob to select [

CLOCK

], then press the knob.

To adjust the clock

3 Turn the volume knob to select [

CLOCK ADJUST

], then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Hour

Minute

5 Turn the volume knob to select [

CLOCK FORMAT

], then press the knob.

6 Turn the volume knob to select [

12H

] or [

24H

], then press the knob.

To set the date

7 Turn the volume knob to select [

DATE FORMAT

], then press the knob.

1

8 Turn the volume knob to select [

DD/MM/YY

] or [

MM/DD/YY

], then press the

Select the display language and cancel the

knob.

demonstration

9 Turn the volume knob to select [

DATE SET

], then press the knob.

When you turn on the power for the first time (or [

FACTORY RESET

] is

10 Turn the volume knob to make the settings, then press the knob.

set to [

YES

], 

5

), the display shows: “SEL LANGUAGE” “PRESS”

Day

Month Year or Month Day Year

“VOLUME KNOB”

11 Press and hold to exit.

1 Turn the volume knob to select [

ENG

] (English), [

RUS

] (Russian)

To return to the previous setting item, press .

or [

SPA

] (Spanish), then press the knob.

[

ENG

] is selected for the initial setup.

3

Set the initial settings

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME

KNOB”.

1

Press repeatedly to enter STANDBY.

2 Press the volume knob.

2 Press the volume knob to enter [

FUNCTION

].

[

YES

] is selected for the initial setup.

• Pressing enter [

AUDIO CONTROL

] directly.

3 Press the volume knob again.

3 Turn the volume knob to select an item ( 

5

), then press the knob.

“DEMO OFF” appears.

4 Repeat step 3 until the desired item is selected or activated.

5 Press and hold to exit.

Then, the display shows the selected crossover type:

To return to the previous setting item, press .

“2-WAY X ’ OVER” or “3-WAY X ’ OVER”

• To change the crossover type, see “Change the crossover type”

(



5

).

4

JS_KWD_DPX_7000DAB_EN_EN_1.indd 4JS_KWD_DPX_7000DAB_EN_EN_1.indd 4 26/10/2015 3:53:07 PM26/10/2015 3:53:07 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

GETTING STARTED

Default:

XX

F/W UPDATE

TUNER SETTING

UPDATE SYSTEM/ UPDATE DAB1/ UPDATE DAB2

DAB L-BAND*

1

ON

:

Receives L-BAND ensemble during digital audio reception.

;

F/W UP xx.xx/

YES

:Starts upgrading the firmware.;

NO

:Cancels (upgrading is not

OFF

:

Cancels

F/W UP xxxxx/

activated).

DAB ANT

ON

:

Supplies power to the DAB antenna. Selects when using the supplied

F/W UP Vxxx

For details on how to update the firmware, see:

POWER*

1

antenna.

;

OFF

:

Does not supply power. Selects when using passive

www.kenwood.com/cs/ce/

antenna without booster. (



32

)

FACTORY RESET YES

:Resets the settings to default (except the stored station).;

PRESET TYPE NORMAL

:Memorizes one station for each preset button in each band

NO

:Cancels.

(FM1/ FM2/ FM3/ MW/ LW/ DB1/ DB2/ DB3).;

MIX

:Memorizes one

CLOCK

station (digital radio or analog radio) for each preset button, regardless

of the selected band.

CLOCK DISPLAY

ON

:The clock time is shown on the display even when the unit is

turned off.;

OFF

:Cancels.

DISPLAY

ENGLISH

Select the display language for [

FUNCTION

] menu and music

EASY MENU

When entering [

FUNCTION

]...

РУССКИЙ

information if applicable.

ON

:ZONE1 and ZONE2 illuminations change to white color.;

OFF

:ZONE2

ESPANOL

By default, [

ENGLISH

] is selected.

illumination changes to white color while ZONE1 illumination remains as

[

COLOR



SELECT

] color. ( 

21

)

(Refer to the illustration on page 21 for zone identification.)

Change the crossover type

SYSTEM

1

Press repeatedly to enter STANDBY.

KEY BEEP*

2

ON

:Activates the keypress tone.;

OFF

:Deactivates.

2 Press and hold number buttons 4 and 5 to enter crossover select.

The current crossover type appears.

SOURCE SELECT

3 Turn the volume knob to select “2WAY” or “3WAY”, then press the

BUILT-IN AUX

ON

:Enables AUX in source selection.;

OFF

:Disables. ( 

10

)

knob.

4

Turn the volume knob to select “YES” or “NO”, then press the knob.

P-OFF WAIT

Applicable only when the demonstration mode is turned off.

The selected crossover type appears.

Sets the duration when the unit will automatically turn off (while in

standby mode) to save the battery.

• To cancel, press and hold .

20M

: 20minutes;

40M

: 40minutes;

60M

: 60minutes;

– – –

:Cancels

• To adjust the selected crossover settings, (



20

).

CD READ 1

:Automatically distinguishes between audio file disc and music CD.;

Caution

2

:Forces to play as a music CD. No sound can be heard if an audio file disc

Select a crossover type according to how the speakers are connected.

is played.

(



31

)

If you select a wrong type:

*

1

For .

• The speakers may damage.

*

2

Not applicable if 3-way crossover is selected.

• The output sound level may be extremely high or low.

ENGLISH

5

JS_KWD_DPX_7000DAB_EN_EN_1.indd 5JS_KWD_DPX_7000DAB_EN_EN_1.indd 5 26/10/2015 3:53:07 PM26/10/2015 3:53:07 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

CD / USB / iPod / ANDROID

Select a file from a folder/list

Other settings

1

Press .

1

Press the volume knob to enter [

FUNCTION

].

2 Turn the volume knob to select a folder/list, then press the knob.

2 Turn the volume knob to select an item (see the following table),

3 Turn the volume knob to select a file, then press the knob.

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

Quick Search

4 Press and hold to exit.

If you have many files, you can search through them quickly.

To return to the previous setting item, press .

Turn the volume knob quickly to browse through the list quickly.

–

Not applicable for iPod.

Default:

XX

(or)

USB

Press S/T to search at a preset skip search ratio. (

[

SKIP

SEARCH

])

MUSIC DRIVE DRIVE CHANGE

:The next drive ([

DRIVE 1

] to [

DRIVE 4

]) is selected

• Pressing and holding S/T searches at a 10

%

ratio.

automatically and playback starts. Repeat steps

1

to

3

to select the

– Not applicable for audio CD and MP3/ WMA/ AAC/ WAV/ FLAC files.

following drives.

(or)

SKIP SEARCH 0.5%

/

1%

/

5%

/

10%

: While listening to iPod or ANDROID, selects the skip

Alphabet search

(applicable only for iPod)

search ratio over the total files.

If you have many files in the iPod, you can search through them

quickly according to the first character of the file name.

Turn the volume knob quickly to enter character search.

Turn the volume knob to select the character.

To search for a character other than A to Z and 0to9, enter only

“

”.

*

Press S/T to move to the entry position.

• You can enter up to 3characters.

Press the volume knob to start searching.

• To return to the root folder/ first file/ top menu, press 5. (

Not applicable

for BT AUDIO source.

)

• To return to the previous setting item, press

.

• To cancel, press and hold

.

• For iPod, applicable only when [

MODE OFF

] is selected.

( 

11

)

• For ANDROID, applicable only when [

BROWSE MODE

] is selected.

( 

11

)

12

JS_KWD_DPX_7000DAB_EN_EN_1.indd 12JS_KWD_DPX_7000DAB_EN_EN_1.indd 12 26/10/2015 3:53:08 PM26/10/2015 3:53:08 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

BLUETOOTH — Connection

• This unit supports Secure Simple Pairing (SSP).

• Up to 10 devices can be registered (paired) in total.

Supported Bluetooth profiles

Supported Bluetooth codecs

• Once the pairing is completed, the Bluetooth device

– Hands-Free Profile (HFP)

– Sub Band Codec (SBC)

will remain registered in the unit even if you reset the

– Advanced Audio Distribution Profile (A2DP)

– Advanced Audio Coding (AAC)

unit. To delete the paired device,

17

, [

DEVICE DELETE

].

– Audio/Video Remote Control Profile (AVRCP)

– Serial Port Profile (SPP)

Once pairing is completed, Bluetooth connection is

– Phonebook Access Profile (PBAP)

established automatically. “BT1” and/or “BT2” indicator

on the faceplate lights up.

Connect the microphone

• A maximum of two Bluetooth phones and one

Bluetooth audio device can be connected at any time.

Rear panel

• Some Bluetooth devices may not automatically

Microphone

connect to the unit after pairing. Connect the device

(supplied)

to the unit manually.

• Refer to the instruction manual of the Bluetooth

Microphone input

device for more information.

jack

Adjust the microphone

angle

Secure using cord clamps (not

Auto Pairing

supplied) if necessary.

When you connect iPhone/ iPod touch/ Android

device to the USB input terminal, pairing request (via

Bluetooth) is automatically activated.

Pair and connect a Bluetooth device for the first time

Press the volume knob to pair once you have

1

Press to turn on the unit.

confirmed the device name.

2 Search and select this unit model name (DPX-70

DAB/ DPX-50

BT) on the

**

**

Automatic pairing request is activated only if:

Bluetooth device.

– Bluetooth function of the connected device is turned

“PAIRING”

“PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” scrolls on

on.

the display.

– [

AUTO PAIRING

] is set to [

ON

]. (

17

)

• For some Bluetooth devices, you may need to enter the Personal Identification

– KENWOOD MUSIC PLAY application is installed on the

Number (PIN) code immediately after searching.

Android device (

10

) and [

BROWSE MODE

] is selected

3 Press the volume knob to start pairing.

(

11

).

“PAIRING OK” appears when pairing is completed.

ENGLISH

13

JS_KWD_DPX_7000DAB_EN_EN_1.indd 13JS_KWD_DPX_7000DAB_EN_EN_1.indd 13 26/10/2015 3:53:08 PM26/10/2015 3:53:08 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BLUETOOTH®

BLUETOOTH — Mobile phone

Connect with a remote device by One-touch (NFC)

Near Field Communication (NFC) enables short-range wireless

communication between the unit and remote devices.

By holding an NFC-compatible remote device near to the N-Mark on

the unit, the unit and remote device proceed to complete pairing and

established the BLUETOOTH connection automatically.

1 Activate the NFC function on the remote device.

Refer to the instruction manual of the remote device for more

information.

2 Hold the remote device near to the N-Mark on the unit.

The device vibrates when pairing is completed.

Receive a call

When there is an incoming call:

• ZONE 2 illuminates in green color and flashes.

• The unit answers the call automatically if [

AUTO ANSWER

] is set to a

selected time. (



15

)

During a call:

• The display illuminates according to the settings made for [

DISPLAY

]

(



21

) and ZONE 2 illuminates in green color.

• To disconnect, hold the remote device near to the N-Mark on the unit

• If you turn off the unit, the Bluetooth connection is disconnected.

again.

• This unit only can recognize and connect to one NFC-compatible device

at a time.

14

JS_KWD_DPX_7000DAB_EN_EN_1.indd 14JS_KWD_DPX_7000DAB_EN_EN_1.indd 14 26/10/2015 3:53:08 PM26/10/2015 3:53:08 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

The following operations may differ or not available depending on the

Improve the voice quality

connected phone.

While talking on the phone...

1 Press the volume knob to enter [

FUNCTION

].

To On the faceplate

2 Turn the volume knob to select an item (see the following table),

First incoming call...

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

Answer a call

Press

or the volume knob or one

4 Press and hold to exit.

of the number buttons (1 to 6).

To return to the previous setting item, press .

Reject a call

Press

.

Default:

XX

End a call

Press .

MIC GAIN –10

—

+10

(

–4

):The sensitivity of the microphone increases as the

number increased.

While talking on the first incoming call...

NR LEVEL –5

—

+5

(

0

):Adjust the noise reduction level until the least noise is

Answer another incoming

Press

.

being heard during a phone conversation.

call and hold the current

call

ECHO CANCEL

–5

—

+5

(

0

):Adjust the echo cancellation delay time until the least

echo is being heard during a phone conversation.

Reject another incoming

Press

.

call

Make the settings for receiving a call

While having two active calls...

1

Press to enter Bluetooth mode.

End current call and

Press

.

2 Turn the volume knob to select an item (see the following table),

activate held call

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

Swap between the

Press

.

4 Press and hold to exit.

current call and held call

To return to the previous setting item, press .

Adjust the phone volume

Turn the volume knob during a call.

Default:

XX

[00]

to

[35]

• This adjustment will not affect the

(Default:

[15]

)

volume of the other sources.

SETTINGS

Switch between hands-free

Press

during a call.

AUTO ANSWER

1

—

30

:The unit answers incoming call automatically in the selected

and private talk modes

• Operations may vary according to the

time (in seconds).;

OFF

:Cancels.

connected Bluetooth device.

BATT/SIGNAL* AUTO

:Shows the strength of the battery and signal when the unit

detects a Bluetooth device and the Bluetooth device is connected.;

OFF

:Cancels. Clock time is shown.

*

Functionality depends on the type of the phone used.

ENGLISH

15

JS_KWD_DPX_7000DAB_EN_EN_1.indd 15JS_KWD_DPX_7000DAB_EN_EN_1.indd 15 26/10/2015 3:53:08 PM26/10/2015 3:53:08 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BLUETOOTH®

Make a call

NUMBER DIAL

1

Turn the volume knob to select a number (0 to 9)

or character (

, #, +).

You can make a call from the call history, phonebook, or dialing the number. Call by

2

Press

S / T

to move the entry position.

voice is also possible if your mobile phone has the feature.

Repeat steps

1

and

2

until you finish entering the

1 Press to enter Bluetooth mode.

phone number.

2 Turn the volume knob to select an item (see the following table), then press the

3

Press the volume knob to call.

knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

VOICE

Speak the name of the contact you want to call or the

instructions stated on the selected item.

voice command to control the phone functions.

4 Press and hold to exit.

(



Make a call using voice recognition

)

To return to the previous setting item, press .

BATT LOW

/

MID

/

FULL

*

:Shows the strength of the battery.

NO SIGNAL

/

LOW

/

MID

/

MAX

*

:Shows the strength of the current

CALL HISTORY

(Applicable only if the phone supports PBAP)

received signal.

1

Press the volume knob to select a name or a phone number.

*

Functionality depends on the type of the phone used.

• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the display to

indicate the previous call status.

Make a call using voice recognition

• Press

DISP

to change the display category (NUMBER or NAME).

• “NO DATA” appears if there is no recorded call history.

1

Press and hold to activate the voice recognition

2

Press the volume knob to call.

of the connected phone.

2 Speak the name of the contact you want to call or

PHONE BOOK

(Applicable only if the phone supports PBAP)

the voice command to control the phone functions.

1

Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains

• Supported Voice Recognition features vary for each

many contacts).

phone. Refer to the instruction manual of the connected

The first menu (ABCDEFGHIJK) appears.

phone for details.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

), press

J / K

.

*

• This unit also supports the intelligent personal assistant

• To select the desired first letter, turn the volume knob or press

S / T

, then press

function of iPhone.

the knob.

Select “1” to search with numbers and select “

” to search with symbols.

*

2

Turn the volume knob to select a name, then press the knob.

3

Turn the volume knob to select a phone number, then press the knob to call.

•

The phonebook of the connected phone is automatically transferred to the unit when

pairing.

•

Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL

•

This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as “U”.)

16

JS_KWD_DPX_7000DAB_EN_EN_1.indd 16JS_KWD_DPX_7000DAB_EN_EN_1.indd 16 26/10/2015 3:53:09 PM26/10/2015 3:53:09 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

Settings in memory

Other settings

1

Press the volume knob to enter

[FUNCTION

].

Store a contact in memory

2 Turn the volume knob to select an item (see the following table), then press the

You can store up to 6 contacts into the number buttons

knob.

(1 to 6).

3 Repeat step 2 until the desired item is selected/activated or follow the

1 Press to enter Bluetooth mode.

instructions stated on the selected item.

2 Turn the volume knob to select [

CALL HISTORY

], [

PHONE

4 Press and hold to exit.

BOOK

], or [

NUMBER DIAL

], then press the knob.

To return to the previous setting item, press .

3 Turn the volume knob to select a contact or enter a

phone number.

Default:

XX

If a contact is selected, press the volume knob to show

the phone number.

BT MODE

4 Press and hold one of the number buttons (1 to 6).

PHONE SELECT

Selects the phone or audio device to connect or disconnect.

“STORED” appears when the contact is stored.

“

” appears in front of the device name when connected.

To erase a contact from the preset memory, select [

NUMBER

*

•

AUDIO SELECT

You can only connect a maximum of two Bluetooth phones and one Bluetooth audio

DIAL

] in step 2 and store a blank number.

device at any time.

Make a call from memory

DEVICE DELETE

1

Turn the volume knob to select a device to delete, then press the knob.

2

Turn the volume knob to select [

YES

] or [

NO

], then press the knob.

1

Press to enter Bluetooth mode.

2 Press one of the number buttons (1 to 6).

PIN CODE EDIT

Changes the PIN code (up to 6 digits).

3 Press the volume knob to call.

(0000)

1

Turn the volume knob to select a number.

“NO MEMORY” appears if there is no contacts stored.

2

Press

S

/

T

to move the entry position.

Repeat steps

1

and

2

until you finish entering the PIN code.

3

Press the volume knob to confirm.

RECONNECT ON

:The unit automatically reconnect when the last connected Bluetooth device is

within range.;

OFF

:Cancels.

AUTO PAIRING ON

:The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/

Android device) when it is connected through USB input terminal.Depending on the

operating system of the connected device, this function may not work. ;

OFF

:Cancels.

INITIALIZE YES

:Initializes all the Bluetooth settings (including stored pairing, phonebook, and

etc.).;

NO

:Cancels.

ENGLISH

17

JS_KWD_DPX_7000DAB_EN_EN_1.indd 17JS_KWD_DPX_7000DAB_EN_EN_1.indd 17 26/10/2015 3:53:09 PM26/10/2015 3:53:09 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BLUETOOTH®

BLUETOOTH — Audio

Bluetooth test mode

You can check the connectivity of the supported profile

between the Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold .

“PLEASE PAIR YOUR PHONE PIN 0000” appears.

2 Search and select this unit model name

(DPX-70

DAB/ DPX-50

BT) on the Bluetooth

**

**

device.

3 Operate the Bluetooth device to confirm pairing.

“TESTING” flashes on the display.

The connectivity result (OK or NG) appears after the

test.

Audio player via Bluetooth

PAIRING: Pairing status

1

Press repeatedly to select BTAUDIO.

HF CNT: Hands-Free Profile (HFP) compatibility

2 Operate the Bluetooth audio player to start playback.

AUD CNT: Advanced Audio Distribution Profile (A2DP)

compatibility

To On the faceplate

PB DL: Phonebook Access profile (PBAP)

compatibility

Playback / pause

Press

.

Select group or folder

Press J / K.

To cancel test mode, press and hold

to turn off

the unit.

Reverse / Forward skip

Press S/T.

Reverse / Fast-forward

Press and hold S/T.

Repeat play Press

repeatedly.

ALL REPEAT

,

FILE REPEAT

,

REPEAT OFF

Random play Press and hold to select

ALL RANDOM

.

• Press

to select

RANDOM OFF

.

Select a file from a folder/list Refer to “Select a file from a folder/list” on page 12.

Operations and display indications may differ according to their availability on the

connected device.

18

JS_KWD_DPX_7000DAB_EN_EN_1.indd 18JS_KWD_DPX_7000DAB_EN_EN_1.indd 18 26/10/2015 3:53:09 PM26/10/2015 3:53:09 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

While listening to any source...

FADER

(Not applicable if 3-way crossover is selected.)

1 Press to enter [

AUDIO CONTROL

] directly.

R15

to

F15

(

0

):Adjusts the rear and front speaker output balance.

2 Turn the volume knob to select an item (see the following table),

BALANCE L15

to

R15

(

0

):Adjusts the left and right speaker output balance.

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

VOLUME OFFSET –15

to

+6

(

0

):Preset the initial volume level of each source. (Before

4 Press and hold to exit.

adjustment, select the source you want to adjust.)

To return to the previous setting item, press .

SOUND EFFECT

Default:

XX

SOUND RECNSTR

(Not applicable for TUNER source, DAB source and AUX source.)

(Sound

ON

:Creates realistic sound by compensating the high-frequency

SUB-W LEVEL –50

to

+10

(

0

): Adjusts the subwoofer output level.

reconstruction)

components and restoring the rise-time of the waveform that are lost

MANUAL EQ

in audio data compression.;

OFF

:Cancels.

BAND1 LEVEL LEVEL

–9

to

+9

(

0

):(Refer to

BAND2 LEVEL

below.)

SPACE ENHANCE

(Not applicable for TUNER source and DAB source.)

SMALL

/

MEDIUM

/

LARGE

:Virtually enhances the sound space.;

BASS EXTEND ON

:Turns on the extended bass.;

OFF

:Cancels.

OFF

:Cancels.

BAND2 LEVEL

to

–9

to

+9

(

0

): The sound elements (frequency level, tone level, Q

SND REALIZER LEVEL1

/

LEVEL2

/

LEVEL3

:Virtually makes the sound more realistic.;

BAND13 LEVEL

factor) are preset into each selection (

BAND1 LEVEL

to

BAND13

OFF

:Cancels.

LEVEL

).

Adjusts the level to memorize for each source. (Before making an

STAGE EQ LOW

/

MIDDLE

/

HIGH

:Virtually adjust the sound position heard from

adjustment, select the source you want to adjust.)

the speakers.;

OFF

:Cancels.

Q FACTOR 1.35

/

1.50

/

2.00

:Adjust the quality factor.

DRIVE EQ ON

: Boosts the frequency to reduce the noise heard from outside the

car or running noise of the tyres.;

OFF

:Cancels.

PRESET EQ NATURAL

/

ROCK

/

POPS

/

EASY

/

TOP40

/

JAZZ

/

POWERFUL

/

USER

:

Selects a preset equalizer suitable to the music genre. (Select [

USER

]

SPEAKER SIZE

Depending on the crossover type you have selected

( 

5

)

, 2-way

to use the settings made in [

MANUAL EQ

].)

crossover or 3-way crossover setting items will be shown.

( 

20, 21

)

X ‘ OVER

By default, 2-way crossover type is selected.

BASS BOOST LEVEL1

/

LEVEL2

/

LEVEL3

/

LEVEL4

/

LEVEL5

:Selects your preferred

bass boost level.;

OFF

:Cancels.

[

SUB-W LEVEL

] is selectable only if [

SUBWOOFER SET

] is set to [

ON

].

LOUDNESS LEVEL1

/

LEVEL2

:Selects your preferred low and high frequencies

boost to produce a well-balanced sound at a low volume level.;

OFF

:Cancels.

SUBWOOFER SET ON

:Turns on the subwoofer output.;

OFF

:Cancels.

ENGLISH

19

JS_KWD_DPX_7000DAB_EN_EN_1.indd 19JS_KWD_DPX_7000DAB_EN_EN_1.indd 19 26/10/2015 3:53:09 PM26/10/2015 3:53:09 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

Crossover settings

2-way crossover setting items

Below are the available setting items for 2-way crossover and 3-way

SPEAKER SIZE

crossover.

FRONT SIZE

8CM

/

10CM

/

12CM

/

13CM

/

16CM

/

17CM

/

18CM

/

4×6

/

5×7

/

6×8

/

6×9

/

7×10

SPEAKER SIZE

Selects according to the connected speaker size for optimum

TWEETER

SMALL

/

MIDDLE

/

LARGE

/

NONE

(not connected)

performance.

REAR 8



CM

/

10



CM

/

12



CM

/

13



CM

/

16 CM

/

17



CM

/

18



CM

/

4×6

/

5×7

/

6×8

/

•

The frequency and slope settings are automatically set for the

6×9

/

7×10

/

NONE

(not connected)

crossover of the selected speaker.

•

If [

NONE

] is selected for [

TWEETER

] of [

FRONT

], [

REAR

] and [

SUBWOOFER

] for

SUBWOOFER 16CM

/

20CM

/

25CM

/

30CM

/

38CM OVER

/

NONE

(not connected)

[

SPEAKER SIZE

], the [

X ‘ OVER

] setting of the speaker is not available.

X ' OVER

X ‘ OVER

TWEETER FRQ

1KHZ

/

1.6KHZ

/

2.5KHZ

/

4KHZ

/

5KHZ

/

6.3KHZ

/

[

FRQ

]/ [

F - HPF FRQ

]/ [

R - HPF FRQ

]/ [

SW LPF FRQ

]/ [

HPF FRQ

]/ [

LPF FRQ

]:

8KHZ

/

10KHZ

/

12.5KHZ

Adjusts the crossover frequency for the selected speakers (high pass

GAIN LEFT

–8

to

0

filter or low pass filter).

GAIN RIGHT

–8

to

0

•

If [

THROUGH

] is selected, all signals are sent to the selected speakers.

FRONT HPF F - HPF FRQ

30HZ

/

40HZ

/

50HZ

/

60HZ

/

70HZ

/

80HZ

/

90HZ

/

[

F - HPF SLOPE

]/ [

R - HPF SLOPE

]/ [

SW LPF SLOPE

]/ [

HPF SLOPE

]/ [

LPF SLOPE

]/

100HZ

/

120HZ

/

150HZ

/

180HZ

/

220HZ

/

250HZ/

[SLOPE]:

THROUGH

Adjusts the crossover slope.

•

Selectable only if a setting other than [

THROUGH

] is selected for the

F - HPF SLOPE

–6DB

/

–12DB

/

–18DB

/

–24DB

crossover frequency.

F - HPF GAIN

–8

to

0

[

SW LPF PHASE

]/

[PHASE]:

REAR HPF R - HPF FRQ

Selects the phase of the speaker output to be in line with the other

R - HPF SLOPE

(Refer

FRONT HPF

settings above.)

speaker output.

R - HPF GAIN

[

GAIN LEFT

]/ [

GAIN RIGHT

]/ [

F - HPF GAIN

]/ [

R - HPF GAIN

]/ [

SW LPF GAIN

]/ [

GAIN

]:

Adjusts the output volume of the selected speaker.

SUBWOOFER

SW LPF FRQ

30HZ

/

40HZ

/

50HZ

/

60HZ

/

70HZ

/

80HZ

/

90HZ

/

LPF

100HZ

/

120HZ

/

150HZ

/

180HZ

/

220HZ

/

250HZ

/

THROUGH

The following items is selectable only if [

SUBWOOFER SET

] is set to [

ON

]:

SW LPF SLOPE

–6DB

/

–12DB

/

–18DB

/

–24DB

– [

SUBWOOFER

]/ [

WOOFER

] of [

SPEAKER SIZE

]

– [

SUBWOOFER LPF

]/ [

WOOFER

] of [

X ‘ OVER

]

SW LPF PHASE

REVERSE

(180°)/

NORMAL

(0°)

SW LPF GAIN –8

to

0

20

JS_KWD_DPX_7000DAB_EN_EN_1.indd 20JS_KWD_DPX_7000DAB_EN_EN_1.indd 20 26/10/2015 3:53:09 PM26/10/2015 3:53:09 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

DISPLAY SETTINGS

3-way crossover setting items

SPEAKER SIZE

TWEETER

SMALL

/

MIDDLE

/

LARGE

MID RANGE

8CM

/

10CM

/

12CM

/

13CM

/

16CM

/

17CM

/

18CM

/

4×6

/

5×7

/

6×8

/

6×9

WOOFER

16CM

/

20CM

/

25CM

/

30CM

/

38CM OVER

/

NONE

(not connected)

X ' OVER

TWEETER HPF FRQ

1KHZ

/

1.6KHZ

/

2.5KHZ

/

4KHZ

/

5KHZ

/

6.3KHZ

/

8KHZ

/

10KHZ

/

12.5KHZ

F - HPF SLOPE

–6DB

/

–12DB

PHASE

REVERSE

(180°)/

NORMAL

(0°)

Set the dimmer

GAIN –8

to

0

Press and hold DISP (DIMMER) to turn on or off the dimmer.

MID RANGE HPF FRQ

30HZ

/

40HZ

/

50HZ

/

60HZ

/

70HZ

/

80HZ

/

90HZ

/

• If you have set [

DIMMER TIME

] ( 

22

), it will be canceled once you press

100HZ

/

120HZ

/

150HZ

/

180HZ

/

220HZ

/

250HZ

/

and hold this button.

THROUGH

HPF SLOPE

–6DB

/

–12DB

Other settings

LPF FRQ

1KHZ

/

1.6KHZ

/

2.5KHZ

/

4KHZ

/

5KHZ

/

6.3KHZ

/

8KHZ

/

10KHZ

/

12.5KHZ

/

THROUGH

1

Press the volume knob to enter [

FUNCTION

].

2 Turn the volume knob to select [

DISPLAY

], then press the knob.

LPF SLOPE

–6DB

/

–12DB

3 Turn the volume knob to select an item ( 

22

), then press the knob.

PHASE

REVERSE

(180°)/

NORMAL

(0°)

4 Repeat step 3 until the desired item is selected/activated or follow

the instructions stated on the selected item.

GAIN –8

to

0

5 Press and hold to exit.

WOOFER LPF FRQ

30HZ

/

40HZ

/

50HZ

/

60HZ

/

70HZ

/

80HZ

/

90HZ

/

To return to the previous setting item, press .

100HZ

/

120HZ

/

150HZ

/

180HZ

/

220HZ

/

250HZ

/

THROUGH

SLOPE

–6DB

/

–12DB

PHASE

REVERSE

(180°)/

NORMAL

(0°)

GAIN –8

to

0

ENGLISH

21

JS_KWD_DPX_7000DAB_EN_EN_2.indd 21JS_KWD_DPX_7000DAB_EN_EN_2.indd 21 3/11/2015 4:51:39 PM3/11/2015 4:51:39 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

SPECIFICATIONS

INSTALLATION / CONNECTION



Warning

Frequency Response (±3dB) 20Hz—20kHz

•

The unit can only be used with a 12V DC power supply, negative ground.

Input Maximum Voltage 1000mV

•

Disconnect the battery’s negative terminal before wiring and mounting.

Auxiliary

Input Impedance 30kΩ

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black)

to prevent a short circuit.

Operating Voltage 14.4V (10.5V—16V allowable)

•

Insulate unconnected wires with vinyl tape to prevent a short circuit.

•

Be sure to ground this unit to the car’s chassis again after installation.



Maximum Current Consumption 10A

Operational Temperature Range –10°C—+60°C

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

General

Installation Size (W×H×D) 182mm×111mm×158mm

•

Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and

Weight

: 1.7kg

shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

: 1.6kg

•

Do not connect the

[

wires of speakers to the car chassis or Ground wire (black), or connect them in

parallel.

Subject to change without notice.

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the

terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by

the ignition key.

•

Keep all cables away from heat dissipate metal parts.

•

After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working

properly.

•

If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse

with one that has the same rating.

Basic procedure

1

Remove the key from the ignition switch, then disconnect the [ terminal

of the car battery.

2 Install the DAB antenna (for ).

See Installing the DAB antenna. (



32

)

3 Connect the wires properly.

See Wiring connection. (



30, 31

)

4 Install the unit to your car.

See Installing the unit (in-dash mounting). (



29

)

5 Connect the [ terminal of the car battery.

6 Press to turn on the power.

7 Reset the unit within 5seconds. ( 

3

)

28

JS_KWD_DPX_7000DAB_EN_EN_2.indd 28JS_KWD_DPX_7000DAB_EN_EN_2.indd 28 6/11/2015 8:23:09 AM6/11/2015 8:23:09 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

INSTALLATION / CONNECTION

Installing the unit (in-dash mounting)Part list for installation

Do the required wiring.

Bend the appropriate tabs to hold the

(A)

Mounting sleeve

(



31

)

mounting sleeve firmly in place.

Dashboard of your car

(B)

Trim plate

When installing without the mounting sleeve

How to remove the unit

1

Remove the mounting sleeve and trim plate

1

Fit the catch pin on the extraction keys into

(C)

Wiring harness

from the unit.

the holes on both sides of the trim plate, then

2 Align the holes in the unit (on both sides) with

pull it out.

the vehicle mounting bracket and secure the

2 Insert the extraction keys deeply into the slots

unit with screws (commercially available).

on each side, then follow the arrows as shown

Use only the specified screws. Using wrong screws might

below.

damage the unit.

(D)

Extraction key

ENGLISH

29

JS_KWD_DPX_7000DAB_EN_EN_1.indd 29JS_KWD_DPX_7000DAB_EN_EN_1.indd 29 26/10/2015 3:53:11 PM26/10/2015 3:53:11 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

INSTALLATION / CONNECTION

Wiring connection

When connecting to an external amplifier, connect its ground wire to the car’s chassis to

ISO connectors

avoid damaging the unit.

If your car does not have an ISO terminal :

We recommend installing the unit with a commercially available custom wiring harness

specific for your car and leave this job to professionals for your safety. Consult your car audio

dealer.

Pin

Color and function

A4 Yellow

:

Battery

Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall)

A5 Blue/White

:

Power control

automobiles

A7 Red

:

Ignition (ACC)

You may need to modify the wiring of the supplied wiring harness as illustrated below.

A8 Black

:

Earth (ground) connection

B1

Purple

]

:

Rear speaker (right)

B2

Purple/black

[

For 3-way crossover: Tweeter (right)

A7 (Red) Ignition wire (Red)

B3

Gray

]

:

Front speaker (right)

UnitVehicle

B4

Gray/black

[

For 3-way crossover: Mid range speaker (right)

B5

White

]

:

Front speaker (left)

A4 (Yellow)

Battery wire (Yellow)

B6

White/black

[

For 3-way crossover: Mid range speaker (left)

B7

Green

]

:

Rear speaker (left)

B8

Green/black

[

For 3-way crossover: Tweeter (left)

Default wiring

30

JS_KWD_DPX_7000DAB_EN_EN_1.indd 30JS_KWD_DPX_7000DAB_EN_EN_1.indd 30 26/10/2015 3:53:11 PM26/10/2015 3:53:11 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

INSTALLATION / CONNECTION

Antenna terminal

Fuse (10A)

DAB antenna jack (



6

)

Microphone input jack

( 

13

)

Antenna terminal

Rear/ Front/ Subwoofer output

For 3-way crossover: Tweeter/

Mid Range/ Woofer output

If no connections are made, do not let the wire come out from the tab.

Yellow (Battery wire)

STEERING WHEEL

Light blue/yellow

REMOTE INPUT

Red (Ignition wire)

To the steering wheel remote control adapter

(Steering remote control wire)

REMOTE CONT

Blue/White

ANT CONT

To the power control terminal when using the optional power

(Power control wire/

P. CONT

amplifier or to the antenna control terminal in the vehicle

Red (A7)

Antenna control wire)

Yellow (A4)

Brown

To connect the Kenwood navigation system, refer your

(Mute control wire)

MUTE

navigations manual

ISO connectors

ENGLISH

31

JS_KWD_DPX_7000DAB_EN_EN_1.indd 31JS_KWD_DPX_7000DAB_EN_EN_1.indd 31 26/10/2015 3:53:11 PM26/10/2015 3:53:11 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

INSTALLATION / CONNECTION

Installing the DAB antenna

(for )

Determine the antenna installation position

Connect the supplied DAB antenna to the DAB antenna jack. ( 

31

)

•

The direction of the film antenna

(F)

changes depending on whether the film antenna

(F)

is installed on the

right side or left side.

Caution

•

Be sure to check the installation location of film antenna

(F)

before installing. Film antenna cannot be re-pasted.

•

The film antenna

(F)

is exclusively for use inside the vehicle.

•

Separate from other antennas by at least 100mm.

•

Do not install at the following locations:

•

Do not paste the amplifier unit

(G)

on the ceramic line (black part) around the front glass. Because there is not

– where it may block the driver’s view.

enough adhesion.

– where it may obstruct the operation of safety devices such as air

bags.

Installing the antenna on the left side

Installing the antenna on the right side

– on movable glass surfaces such as the rear hatch.

– at side of vehicle (e.g. door, front quarter window).

Ceramic line (black part)

– on rear window.

•

Signal strength will weaken when installed at the following

locations:

Earth sheet*

150 mm

150 mm

– on IR reflecting glass or locations covered with mirror type glass

film.

(F)

– where it overlaps with genuine radio antenna (pattern).

30 mm

(G)

– where it overlaps with window heating wires.

30 mm

– on glass that blocks radio signals (e.g. IR reflecting glass, thermal

(G)

(F)

insulation glass).

•

Poor reception may occur:

Earth sheet*

– due to noise when windscreen wiper, air conditioner, or motor is

turned on.

*

Paste the earth sheet of the amplifier unit

(G)

on the metal part of the front pillar.

– depending on the direction of the broadcast station with respect

to the vehicle (antenna).

•

Thoroughly wipe oil and dirt from the pasting surface with the

Part list for installation

supplied cleaner

(I)

.

•

Do not bend or damage the film antenna

(F)

.

•

It may not be possible to install on certain vehicles.

(H)

Cable clamper

•

Check the cable routing of the film antenna

(F)

and amplifier unit

(G)

before pasting.

•

Do not apply any glass cleaner after pasting the film antenna

(F)

.

(F)

Film antenna

(G)

Amplifier unit

(cable with booster, 3.5m)

(I)

Cleaner

32

JS_KWD_DPX_7000DAB_EN_EN_1.indd 32JS_KWD_DPX_7000DAB_EN_EN_1.indd 32 26/10/2015 3:53:11 PM26/10/2015 3:53:11 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

INSTALLATION / CONNECTION

Caution

2 Clean the windscreen with the supplied

Installation overview

When installing the antenna cable inside the front

cleaner (I).

The antenna should be installed on the passenger side

pillar with the air bag installed

for safety.

(I)

•

The front pillar cover is secured with a special clip which

may need to be replaced when it is removed.

Contact your vehicle dealer for details on removing the

front pillar cover and availability of replacement parts.

– Wait until the glass surface is completely

dry before proceeding.

– Warm the surface of the windscreen with

defroster if it is cold (during winter).

Clip

3 Remove the separator (tag 1) of film

Front pillar

antenna (F) horizontally and paste the

antenna on the windscreen.

•

Install the amplifier unit

(G)

above the air bag so that it

Antenna installation

Separator (tag 1)

does not obstruct the operation of the air bag.

1

Remove the front pillar cover of your car.

(G)

Front pillar

(F)

Air bag

Do not touch the pasting surface (adhesive

side) of the film antenna (F).

ENGLISH

33

JS_KWD_DPX_7000DAB_EN_EN_1.indd 33JS_KWD_DPX_7000DAB_EN_EN_1.indd 33 26/10/2015 3:53:11 PM26/10/2015 3:53:11 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

INSTALLATION / CONNECTION

4 Rub the film antenna gently onto the

6 Set the postion of the protrusion of the

7 Remove the film covering the earth sheet

windscreen in the direction of the arrow

amplifier unit (G) with the K on the film

and paste the earth sheet on the metal

shown to allow it to stick firmly.

antenna (F) and paste.

part of the vehicle.

Do not touch the lead terminal or the

Provide sufficient leeway for the earth sheet

pasting surface (adhesive side) of the

so that it does not interfere with the interior

amplifier unit (G).

parts (front pillar cover). Also take care that

• When installing the antenna on the right

the interior parts do not interfere with the

side

amplifier unit (G).

(F)

(G)

Earth sheet

Windscreen

(F)

Earth sheet

Set the position of

the protrusion with

(G)

K

mark

Front pillar cover

8 Wire the antenna cables.

Use cable clamper (H) to secure the

Lead terminal of the

antenna to the pillar at several positions.

5 Remove the separator (tag 2) of film

film antenna

(F)

9 Attach the front pillar cover back to its

antenna (F) vertically.

Lead contact of the amplifier

original position.

unit (metal part)

Be sure not to damage the earth sheet and

Separator (tag 2)

amplifier unit (G) when covering.

• When installing the antenna on the left

10 Connect the amplifier unit (G) to the DAB

side

input terminal on the rear of the unit.

11 Set [

DAB ANT POWER

] to [

ON

]. ( 

5)

(F)

(F)

Earth sheet

(G)

34

JS_KWD_DPX_7000DAB_EN_EN_1.indd 34JS_KWD_DPX_7000DAB_EN_EN_1.indd 34 26/10/2015 3:53:11 PM26/10/2015 3:53:11 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

JS_KWD_DPX_7000DAB_EN_EN_1.indd 35JS_KWD_DPX_7000DAB_EN_EN_1.indd 35 26/10/2015 3:53:11 PM26/10/2015 3:53:11 PM