Kenwood KMM-102AY: инструкция
Раздел: Авто, мото оборудование и транспорт
Тип: Автомагнитола
Характеристики, спецификации
Инструкция к Автомагнитоле Kenwood KMM-102AY
KMM-202
KMM-102GY
KMM-122Y
KMM-102AY
KMM-102RY
DIGITAL MEDIA RECEIVER
INSTRUCTION MANUAL
ЦИФРОВОЙ МЕДИА-РЕСИВЕР
ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ
B5A-0893-01 (EN/E2N)© 2015 JVC KENWOOD Corporation
JS_KWD_KMM_202_ENE2N_C01_1.indd 1JS_KWD_KMM_202_ENE2N_C01_1.indd 1 1/7/2015 9:57:54 AM1/7/2015 9:57:54 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Declaration of Conformity with regard to the EMC Directive
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
Manufacturer:
Information on Disposal of Old Electrical and Electronic Equipment and Batteries
JVC KENWOOD Corporation
(applicable for countries that have adopted separate waste collection systems)
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as
EU Representative:
household waste.
JVCKENWOOD NEDERLAND B.V.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper
Декларация соответствия относительно Директивы Электромагнитная
recycling and waste disposal will help conserve resources whilst preventing detrimental effects
совместимость
on our health and the environment.
Notice:
The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
Декларация соответствия относительно Директивы 2011/65/EU об ограничении
содержания вредных веществ
For Israel
Производитель:
ДжейВиСи КЕНВУД Корпорейшн
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония
Представительство в EC:
ДжейВиСиКЕНВУД Нидерланд Би.Ви.
Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды
For Turkey
Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin
Kontrolü Yönetmeliğe uygun olarak üretilmiştir.
Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün
toplama sistemlerini kullanan ülkeleri için uygulanabilir)
Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak
atılamaz.
Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri
dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye
en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara
müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve
çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da
yardımcı olacaktır.
i
JS_KWD_KMM_202_ENE2N_S01_1.indd iJS_KWD_KMM_202_ENE2N_S01_1.indd i 29/6/2015 4:13:11 PM29/6/2015 4:13:11 PM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Дата изготовления (месяц/год) находится на этикетке устройства.
В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы
(годности) данного товара “по истечении которого он может представлять опасность
для жизни, здоровья потребителя, причинять вред его имуществу или окружающей
среде” составляет семь (7) лет со дня производства. Этот срок является временем, в
течение которого потребитель данного товара может безопасно им пользоваться при
условии соблюдения инструкции по эксплуатации данного товара, проводя необходимое
обслуживание, включающее замену расходных материалов и/или соответствующее
ремонтное обеспечение в специализированном сервисном центре.
Дополнительные косметические материалы к данному товару, поставляемые вместе с ним,
могут храниться в течение двух (2) лет со дня его производства.
Срок службы (годности), кроме срока хранения дополнительных косметических материалов,
упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в
частности, гарантийного свидетельства KENWOOD, которое он может получить в соответствии
с законом о правах потребителя или других законов, связанных с ним.
ii
JS_KWD_KMM_202_ENE2N_S01_1.indd iiJS_KWD_KMM_202_ENE2N_S01_1.indd ii 29/6/2015 4:13:11 PM29/6/2015 4:13:11 PM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CONTENTS BEFORE USE
BEFORE USE 2
IMPORTANT
• To ensure proper use, please read through this manual before using this product. It is especially important
BASICS 3
that you read and observe Warning and Caution in this manual.
GETTING STARTED 3
• Please keep the manual in a safe and accessible place for future reference.
1 Select the display language
Warning
and cancel the demonstration
Do not operate any function that takes your attention away from safe driving.
2 Set the clock and date
3 Set the initial settings
Caution
Volume setting:
RADIO 5
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of
USB / iPod / ANDROID 7
the output level.
AUX 9
General:
• Avoid using the external device if it might hinder safe driving.
AUDIO SETTINGS 10
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded
data.
DISPLAY SETTINGS 11
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short
circuit.
TROUBLESHOOTING 12
• Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the
REFERENCES 13
antenna control wire connected (
17
). Turn off the unit or change the source to STANDBY when parking at
Maintenance
a low ceiling area.
More information
How to read this manual
SPECIFICATIONS 15
• Operations are explained mainly using buttons on the faceplate of .
INSTALLATION /
• English indications are used for the purpose of explanation. You can select the display language from the
CONNECTION 16
[
FUNCTION
] menu. (
5
)
• [
XX
] indicates the selected items.
• (
XX
) indicates references are available on the stated page.
2
JS_KWD_KMM_202_ENE2N_EN_5.indd 2JS_KWD_KMM_202_ENE2N_EN_5.indd 2 19/8/2015 12:03:56 PM19/8/2015 12:03:56 PM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
BASICS
GETTING STARTED
Faceplate
Display window
Volume knob
1
Select the display language and cancel the
demonstration
When you turn on the power (or after you reset the
unit), the display shows: “SEL LANGUAGE”
“PRESS”
“VOLUME KNOB”
1 Turn the volume knob to select [
ENG
](English),
Detach button
: Flashes when the unit
[
RUS
](Russian) or [
SPA
](Spanish), then press the
enters searching status.
knob.
[
ENG
] is selected for the initial setup.
How to resetAttach Detach
Then, the display shows: “CANCEL DEMO”
“PRESS”
“VOLUME KNOB”.
Your preset adjustments
2 Press the volume knob.
will be erased except
[
YES
] is selected for the initial setup.
stored radio stations.
3 Press the volume knob again.
“DEMO OFF” appears.
To On the faceplate
Turn on the power
Press
.
• Press and hold to turn off the power.
Adjust the volume Turn the volume knob.
Select a source
Press
repeatedly.
Change the display information Press DISP repeatedly. (
14
)
ENGLISH
3
JS_KWD_KMM_202_ENE2N_EN_4.indd 3JS_KWD_KMM_202_ENE2N_EN_4.indd 3 27/7/2015 3:20:58 PM27/7/2015 3:20:58 PM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
GETTING STARTED
Default:
XX
2
Set the clock and date
AUDIO CONTROL
1
Press the volume knob to enter [
FUNCTION
].
SWITCH PREOUT
REAR
/
SUB-W
or
REAR
/
SUBWOOFER
: Selects whether rear speakers
2 Turn the volume knob to select [
CLOCK
], then press the knob.
or a subwoofer are connected to the line out terminals on the rear
To adjust the clock
(through an external amplifier).
3 Turn the volume knob to select [
CLOCK ADJUST
], then press the knob.
SP SELECT OFF
/
5/4
/
6 × 9/6
/
OEM
: Selects according to the speaker size
4 Turn the volume knob to make the settings, then press the knob.
(5inches or 4inches, 6×9inches or 6inches) or OEM speakers for
Hour
Minute
optimum performance.
5 Turn the volume knob to select [
CLOCK FORMAT
], then press the knob.
6 Turn the volume knob to select [
12H
] or [
24H
], then press the knob.
DISPLAY
To set the date
EASY MENU
(For )
7 Turn the volume knob to select [
DATE FORMAT
], then press the knob.
ON
:Both display and button illumination change to white color when
8 Turn the volume knob to select [
DD/MM/YY
] or [
MM/DD/YY
], then press
entering [
FUNCTION
].;
OFF
:Both display and button illumination
the knob.
remain as [
COLOR
SELECT
] color. (
11
)
9 Turn the volume knob to select [
DATE SET
], then press the knob.
TUNER SETTING
10 Turn the volume knob to make the settings, then press the knob.
Day
Month Year or Month Day Year
PRESET TYPE
NORMAL
:Memorizes one station for each preset button in each band
11 Press and hold to exit.
(FM1/ FM2/ FM3/ MW/ LW).;
MIX
:Memorizes one station for each
preset button, regardless of the selected band.
To return to the previous setting item, press .
SYSTEM
KEY BEEP
ON
:Activates the keypress tone.;
OFF
:Deactivates.
3
Set the initial settings
SOURCE SELECT
1
Press repeatedly to enter STANDBY.
BUILT-IN AUX
ON
:Enables AUX in source selection.;
OFF
:Disables. (
9
)
2 Press the volume knob to enter [
FUNCTION
].
• Pressing AUD enters [
AUDIO CONTROL
] directly.
P-OFF WAIT
Applicable only when the demonstration mode is turned off.
3 Turn the volume knob to select an item (see the following table),
Sets the duration when the unit will automatically turn off (while in
then press the knob.
standby mode) to save the battery.
4 Repeat step 3 until the desired item is selected or activated.
20M
: 20minutes;
40M
: 40minutes;
60M
: 60minutes;
5 Press and hold to exit.
WAIT TIME – – –
or
OFF – – –
:Cancels
To return to the previous setting item, press .
4
JS_KWD_KMM_202_ENE2N_EN_4.indd 4JS_KWD_KMM_202_ENE2N_EN_4.indd 4 27/7/2015 3:21:00 PM27/7/2015 3:21:00 PM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED RADIO
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx
YES
:Starts upgrading the firmware.;
NO
:Cancels
(upgrading is not activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
CLOCK
Search for a station
CLOCK DISPLAY
ON
:The clock time is shown on the display even
1
Press repeatedly to select TUNER.
when the unit is turned off.;
OFF
:Cancels.
2 Press repeatedly to select FM1/ FM2/ FM3/ MW/ LW.
ENGLISH
3 Press S/T to search for a station.
Select the display language for [
FUNCTION
] menu
РУССКИЙ
and music information if applicable.
• To change the searching method for S/T: Press repeatedly.
By default, [
ENGLISH
] is selected.
AUTO1 : Automatically search for a station.
ESPANOL
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1to6).
• To select a stored station: Press one of the number buttons (1to6).
Other settings
1
Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select an item
(
6
)
, then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
ENGLISH
5
JS_KWD_KMM_202_ENE2N_EN_5.indd 5JS_KWD_KMM_202_ENE2N_EN_5.indd 5 14/8/2015 9:28:03 AM14/8/2015 9:28:03 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
RADIO
Default:
XX
CLOCK
TUNER SETTING
TIME SYNC
ON
:Synchronizes the unit’s time to the Radio Data System station time.;
LOCAL SEEK
ON
: Searches only stations with good reception. ;
OFF
: Cancels.
OFF
:Cancels.
•
Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
Available Program Type
AUTO
YES
:Automatically starts memorizing 6 stations with good reception.;
SPEECH
:
NEWS
,
AFFAIRS
,
INFO
(information),
SPORT
,
EDUCATE
,
DRAMA
,
MEMORY
NO
:Cancels.
CULTURE
,
SCIENCE
,
VARIED
,
WEATHER
,
FINANCE
,
CHILDREN
,
SOCIAL
,
•
Selectable only if [
NORMAL
] is selected for [
PRESET TYPE
]. (
4
)
RELIGION
,
PHONE IN
,
TRAVEL
,
LEISURE
,
DOCUMENT
MUSIC
:
POP M
(music),
ROCK M
(music),
EASY M
(music),
LIGHT M
(music),
MONO SET ON
:Improves the FM reception, but the stereo effect may be lost.;
CLASSICS
,
OTHER M
(music),
JAZZ
,
COUNTRY
,
NATION M
(music),
OFF
:Cancels.
OLDIES
,
FOLK M
(music)
NEWS SET ON
: The unit will temporarily switch to News Programme if available. ;
The unit will search for the Program Type categorized under [
SPEECH
] or
OFF
: Cancels.
[
MUSIC
] if selected.
REGIONAL ON
: Switches to another station only in the specific region using the “AF”
• [
LOCAL SEEK
]/ [
MONO SET
]/ [
NEWS SET
]/ [
REGIONAL
]/ [
AF SET
]/ [
TI
]/ [
PTY SEARCH
]
control.;
OFF
:Cancels.
is selectable only when the band is FM1/ FM2/ FM3.
AF SET ON
: Automatically searches for another station broadcasting the same
• If the volume is adjusted during reception of traffic information or news
program in the same Radio Data System network with better reception
bulletin, the adjusted volume is memorized automatically. It will be
when the current reception is poor.;
OFF
:Cancels.
applied the next time traffic information or news bulletin is turned on.
TI ON
:Allows the unit to temporarily switch to Traffic Information if available
(“TI” lights up).;
OFF
:Cancels.
PTY SEARCH
1
Press the volume knob to enter PTY language selection.
2
Turn the volume knob to select the PTY language (
ENGLISH
/
FRENCH
/
GERMAN
), then press the knob.
3
Turn the volume knob to select the available Program Type (see the
following).
4
Press
S / T
to start searching.
6
JS_KWD_KMM_202_ENE2N_EN_2.indd 6JS_KWD_KMM_202_ENE2N_EN_2.indd 6 10/7/2015 8:44:07 AM10/7/2015 8:44:07 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
USB / iPod / ANDROID
Start playback
The source changes automatically and
playback starts.
USB input terminal
USB
To On the faceplate
CA-U1EX (max.: 500mA)
Playback / pause Press .
(optional accessory)
Reverse / Fast-forward
*
4
Press and hold S/T.
iPod/iPhone
(for )
Select a track/file
Press S/T.
Select a folder
*
5
Press J/K.
KCA-iP102 / KCA-iP103
Repeat play
*
6
Press repeatedly.
(optional accessory)
*
1
or accessory cable of the
FILE REPEAT
/
FOLDER REPEAT
/
ALL REPEAT
: MP3/WMA/WAV/FLAC file
iPod/iPhone
*
2
FILE REPEAT
/
FOLDER REPEAT
/
REPEAT OFF
: iPod or ANDROID
Random play
*
6
Press repeatedly.
FOLDER RANDOM
/
RANDOM OFF
: MP3/WMA/WAV/FLAC file, iPod or
ANDROID
*
3
ANDROID
Press and hold
to select
ALL RANDOM
.
*
3
When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions
Micro USB 2.0 cable
*
2
to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device
(commercially available)
before connecting. (
13
)
*
4
For ANDROID: Applicable only when [
BROWSE MODE
] is selected. (
8
)
*
5
Only for MP3/WMA/WAV/FLAC files. This does not work for iPod/ ANDROID.
*
6
1
For iPod/ ANDROID: Applicable only when [
MODE OFF
]/ [
BROWSE MODE
] is selected. (
8
)
*
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
*
2
Do not leave the cable inside the car when not using.
ENGLISH
7
JS_KWD_KMM_202_ENE2N_EN_2.indd 7JS_KWD_KMM_202_ENE2N_EN_2.indd 7 10/7/2015 8:44:07 AM10/7/2015 8:44:07 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
USB / iPod / ANDROID
Select control mode
Select a file from a folder/list
While in IPOD source, press 5 repeatedly.
1
Press .
MODE ON
: Control iPod using the iPod itself
. However,
you can
2 Turn the volume knob to select a folder/list, then press the knob.
still play/pause, file skip, fast-forward or reverse from
3 Turn the volume knob to select a file, then press the knob.
this unit.
Quick Search
MODE OFF
: Control iPod from this unit.
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.
While in ANDROID source, press 5 repeatedly.
–
Not applicable for iPod.
BROWSE MODE
: Control Android device from this unit via
(or)
KENWOOD MUSIC PLAY application installed in the
Android device.
Press S/T to search at a preset skip search ratio. (
9,
[
SKIP SEARCH
])
HAND MODE
: Control Android device using the Android device
• Pressing and holding S/T searches at a 10
%
ratio.
itself via other media player applications installed
–
Not applicable for MP3/WMA/WAV/FLAC files.
in the Android device. However, you can still play/
pause and file skip from this unit.
Alphabet Search
(applicable only for iPod)
You can search for a file according to the first character.
Turn the volume knob quickly to enter character search.
Select music drive
Turn the volume knob to select the character.
Press 5 repeatedly.
To search for a character other than A to Z and 0to9, enter only “
”.
*
Press S/T to move to the entry position.
Stored songs in the following drive will be played back.
• You can enter up to 3characters.
• Selected internal or external memory of a smartphone (Mass
Press the volume knob to start searching.
Storage Class).
• Selected drive of a multiple drives device.
• To return to the root folder/ first file/ top menu, press 5.
• To return to the previous setting item, press
.
• To cancel, press and hold
.
• For iPod, applicable only when [
MODE OFF
] is selected.
• For ANDROID, applicable only when [
BROWSE MODE
] is selected.
8
JS_KWD_KMM_202_ENE2N_EN_4.indd 8JS_KWD_KMM_202_ENE2N_EN_4.indd 8 27/7/2015 3:21:18 PM27/7/2015 3:21:18 PM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
USB / iPod / ANDROID
AUX
Preparation:
Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo
Select [
ON
] for [
BUILT-IN AUX
]. (
4
)
(for )
While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect
Start listening
the iPod/iPhone to the USB input terminal of the unit.
1
Connect a portable audio player (commercially available).
• The unit will output the sound from these applications.
Auxiliary input jack
Portable audio player
Other settings
1
Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
3.5mm stereo mini plug with “L” shaped
4 Press and hold to exit.
connector (commercially available)
To return to the previous setting item, press .
2 Press repeatedly to select AUX.
3 Turn on the portable audio player and start playback.
Default:
XX
USB
Set the AUX name
MUSIC DRIVE DRIVE CHANGE
:The next drive ([
DRIVE 1
] to [
DRIVE 5
]) is
While listening to a portable audio player connected to the unit...
selected automatically and playback starts.
1 Press the volume knob to enter [
FUNCTION
].
Repeat steps
1
to
3
to select the following drives.
2 Turn the volume knob to select [
SYSTEM
], then press the knob.
3 Turn the volume knob to select [
AUX NAME SET
], then press the knob.
SKIP SEARCH 0.5%
/
1%
/
5%
/
10%
: While listening to iPod or ANDROID, selects
4 Turn the volume knob to select an item, then press the knob.
the skip search ratio over the total files.
AUX
(default)/
DVD
/
PORTABLE
/
GAME
/
VIDEO
/
TV
5 Press and hold to exit.
To return to the previous setting item, press .
ENGLISH
9
JS_KWD_KMM_202_ENE2N_EN_2.indd 9JS_KWD_KMM_202_ENE2N_EN_2.indd 9 10/7/2015 8:44:08 AM10/7/2015 8:44:08 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
PRESET EQ DRIVE EQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/
JAZZ
/
1 Press AUD to enter [
AUDIO CONTROL
] directly.
NATURAL
/
USER
:Selects a preset equalizer suitable to the music
2 Turn the volume knob to select an item (see the following table),
genre. (Select [
USER
] to use the settings made in [
EQ PRO
].)
then press the knob.
[
DRIVE EQ
] is a preset equalizer that reduces noise outside the car or
3 Repeat step 2 until the desired item is selected or activated.
running noise of the tyres.
4 Press and hold to exit.
BASS BOOST LV1
/
LV2
/
LV3
or
LEVEL1
/
LEVEL2
/
LEVEL3
:Selects your preferred
To return to the previous setting item, press .
bass boost level.;
OFF
:Cancels.
Default:
XX
LOUDNESS LV1
/
LV2
or
LEVEL1
/
LEVEL2
:Selects your preferred low and high
SUB-W LEVEL –15
to
+15
(
0
) Adjusts the subwoofer output level.
frequencies boost to produce a well-balanced sound at a low volume
level.;
OFF
:Cancels.
BASS LEVEL –8
to
+8
(
+2
)
Adjusts the level to memorize for each source. (Before
SUBWOOFER SET ON
:Turns on the subwoofer output.;
OFF
:Cancels.
MID LEVEL –8
to
+8
(
+1
)
making an adjustment, select the source you want
to adjust.)
LPF SUBWOOFER THROUGH
:All signals are sent to the subwoofer.;
85HZ
/
120HZ
/
TRE LEVEL –8
to
+8
(
+1
)
160HZ
:Audio signals with frequencies lower than 85Hz/ 120Hz/
EQ PRO
(This setting is stored to [
USER
].)
160Hz are sent to the subwoofer.
BASS ADJUST BASS CTR FRQ 60
/
80
/
100
/
200
or
60HZ
/
80HZ
/
100HZ
/
200HZ
:
SUB-W PHASE REVERSE
(180°)/
NORMAL
(0°):Selects the phase of the subwoofer
Selects the center frequency.
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [
THROUGH
] is selected for
BASS LEVEL –8
to
+8
(
+2
):Adjusts the level.
[
LPF SUBWOOFER
].)
BASS Q FACTOR 1.00
/
1.25
/
1.50
/
2.00
:Adjusts the quality factor.
FADER R15
to
F15
(
0
):Adjusts the rear and front speaker output balance.
BASS EXTEND ON
:Turns on the extended bass.;
OFF
:Cancels.
BALANCE L15
to
R15
(
0
):Adjusts the left and right speaker output balance.
MID ADJUST MID CTR FRQ 0.5K
/
1.0K
/
1.5K
/
2.5K
or
0.5KHZ
/
1.0KHZ
/
VOLUME OFFSET
For AUX:
–8
to
+8
(
0
) ; For other sources:
–8
to
0
:Preset the initial
1.5KHZ
/
2.5KHZ
:Selects the center frequency.
volume level of each source. (Before adjustment, select the source you
MID LEVEL –8
to
+8
(
+1
):Adjusts the level.
want to adjust.)
MID Q FACTOR 0.75
/
1.00
/
1.25
:Adjusts the quality factor.
SOUND RECNSTR
ON
:Creates realistic sound by compensating the high-frequency
TRE ADJUST TRE CTR FRQ 10.0K
/
12.5K
/
15.0K
/
17.5K
or
10.0KHZ
/
12.5KHZ
/
(Sound
components and restoring the rise-time of the waveform that are lost
15.0KHZ
/
17.5KHZ
:Selects the center frequency.
reconstruction)
in audio data compression.;
OFF
:Cancels.
TRE LEVEL –8
to
+8
(
+1
):Adjusts the level.
• [
SUB-W LEVEL
]/ [
SUBWOOFER SET
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is
selectable only if [
SWITCH PREOUT
] is set to [
SUB-W
] or [
SUBWOOFER
]. (
4
)
• [
SUB-W LEVEL
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is selectable only if
[
SUBWOOFER SET
] is set to [
ON
].
10
JS_KWD_KMM_202_ENE2N_EN_4.indd 10JS_KWD_KMM_202_ENE2N_EN_4.indd 10 27/7/2015 3:28:26 PM27/7/2015 3:28:26 PM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
DISPLAY SETTINGS
(For
)
COLOR SELECT
(For )
Select color for
ALL ZONE
,
ZONE 1
and
ZONE 2
separately.
1
Select a zone. (See illustration on the left column.)
2
Select a color for the selected zone.
VARIABLE SCAN
/
CUSTOM R/G/B
/
preset colors*
To make your own color, select [
CUSTOM R/G/B
]. The color you have
made will be stored in [
CUSTOM R/G/B
].
1
Press the volume knob to enter the detailed color adjustment.
2
Press
S
/
T
to select the color (
R
/
G
/
B
) to adjust.
3
Turn the volume knob to adjust the level (
0
—
9
), then press the
knob.
Set the dimmer
DIMMER
Dim the display illumination (and button illumination for ).
Press and hold DISP (DIMMER) to turn on or off the dimmer.
ON
:Dimmer is turned on.;
OFF
:Cancels.
• If you have set [
DIMMER TIME
], it will be canceled once you press and
DIMMER TIME
:Set the dimmer on and off time.
hold this button.
1
Turn the volume knob to adjust the [
ON
] time, then press the knob.
2
Turn the volume knob to adjust the [
OFF
] time, then press the knob.
Other settings
(Default: [
ON
]:
18:00
; [
OFF
]:
6:00
)
1
Press the volume knob to enter [
FUNCTION
].
BRIGHTNESS 0
—
31
: Select your preferred brightness level for display illumination.
2 Turn the volume knob to select [
DISPLAY
], then press the knob.
(For )
3 Turn the volume knob to select an item (see the following table),
1
Select a zone. (See illustration on the left column.)
then press the knob.
2
0
—
31
: Select your preferred brightness level for display and button
4 Repeat step 3 until the desired item is selected/activated or follow
illumination.
the instructions stated on the selected item.
5 Press and hold to exit.
TEXT SCROLL AUTO
/
ONCE
:Select whether to scroll the display information
automatically, or scroll only once.;
OFF
:Cancels.
To return to the previous setting item, press .
*
Preset colors:
RED1
/
RED2
/
RED3
/
PURPLE1
/
PURPLE2
/
PURPLE3
/
PURPLE4
/
BLUE1
/
BLUE2
/
BLUE3
/
SKYBLUE1
/
SKYBLUE2
/
LIGHTBLUE
/
AQUA1
/
AQUA2
/
GREEN1
/
GREEN2
/
GREEN3
/
YELLOWGREEN1
/
YELLOWGREEN2
/
YELLOW
/
ORANGE1
/
ORANGE2
/
ORANGERED
ENGLISH
11
JS_KWD_KMM_202_ENE2N_EN_5.indd 11JS_KWD_KMM_202_ENE2N_EN_5.indd 11 14/8/2015 9:35:09 AM14/8/2015 9:35:09 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom Remedy
Symptom Remedy
Sound cannot be heard.
•
Adjust the volume to the optimum level.
“NA DEVICE”
Connect a supported USB device, and check the connections.
•
Check the cords and connections.
“NO MUSIC” Connect a USB device that contains playable audio files.
“MISWIRING CHECK WIRING
Turn the power off, then check to be sure the terminals
“iPod ERROR”
•
Reconnect the iPod.
USB / iPod
THEN PWR ON” appears.
of the speaker wires are insulated properly. Turn the
•
Reset the iPod.
power on again.
•
Sound cannot
•
Reconnect the Android device.
“PROTECTING SEND SERVICE”
Send the unit to the nearest service center.
be heard during
•
If in [
HAND MODE
], launch any media player application
General
appears.
playback.
on the Android device and start playback.
•
Sound cannot be heard.
Clean the connectors. (
13
)
•
Sound output only
•
If in [
HAND MODE
], relaunch the current media player
•
The unit does not turn on.
from the Android
application or use another media player application.
•
Information shown on the
device.
•
Restart the Android device.
display is incorrect.
•
If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. (
13
)
The unit does not work at all. Reset the unit. (
3
)
Cannot playback at
•
Make sure KENWOOD MUSIC PLAY APP is installed on the
•
Radio reception is poor.
Connect the antenna firmly.
[
BROWSE MODE
].
Android device. (
7
)
•
Static noise while listening
Radio
•
Reconnect the Android device and select the appropriate
to the radio.
control mode.
“READING” keeps flashing. Do not use too many hierarchical levels or folders.
ANDROID
•
If this does not solve the problem, the connected Android
Elapsed playing time is not
This is caused by how the tracks are recorded.
device does not support [
BROWSE MODE
]. (
13
)
correct.
“NO DEVICE” or
•
Switch off the developer options on the Android device.
Correct characters are not
This unit can only display uppercase letters, numbers,
“READING” keeps
•
Reconnect the Android device.
displayed (e.g. album name).
and a limited number of symbols. (
5
)
flashing.
•
If this does not solve the problem, the connected Android
device does not support [
BROWSE MODE
]. (
13
)
“NA FILE” Make sure the media contains supported audio files.
(
13
)
Playback is intermittent
Turn off the power saving mode on the Android device.
USB / iPod
or sound skips.
“READ ERROR” Copy the files and folders onto the USB device again. If
this does not solve the problem, reset the USB device
“ANDROID ERROR” /
•
Reconnect the Android device.
or use another USB device.
“NADEVICE”
•
Restart the Android device.
“NO DEVICE” Connect a USB device, and change the source to USB
again.
“COPY PRO” A copy-protected file is played.
12
JS_KWD_KMM_202_ENE2N_EN_5.indd 12JS_KWD_KMM_202_ENE2N_EN_5.indd 12 14/8/2015 9:35:10 AM14/8/2015 9:35:10 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
REFERENCES
Maintenance
About USB devices
•
This unit can play MP3/WMA/WAV/FLAC files stored on a USB mass storage class device.
Cleaning the unit
•
You cannot connect a USB device via a USB hub.
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
•
Connecting a cable whose total length is longer than 5m may result in abnormal playback.
•
This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1A.
Cleaning the connector
Detach the faceplate and clean the connector gently
About iPod/iPhone
with a cotton swab, being careful not to damage
Made for
the connector.
-
iPod touch (2nd, 3rd, 4th, and 5th generation)
Connector (on the reverse side of the faceplate)
-
iPod classic
-
iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
More information
-
iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus
Visit also the following website <www.kenwood.com/cs/ce/> for:
•
You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.
–
Latest firmware updates and latest compatible item list
•
Depending on the version of the operating system of the iPod/iPhone, some functions may
–
Android™ application KENWOOD MUSIC PLAY
not operate on this unit.
–
Any other latest information
About Android device
General
•
This unit supports Android OS 4.1 and above.
Detailed information and notes about the playable audio files are stated in an online manual
•
Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory
on the following website: www.kenwood.com/cs/ce/audiofile/
(AOA) 2.0.
•
If the Android device supports both mass storage class device and AOA 2.0, this unit always
Playable files
playback via AOA 2.0 as priority.
•
Playable audio file: MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac)
•
Playable disc media: CD-R/CD-RW/CD-ROM
•
Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.
Muting upon the reception of a phone call
•
Playable USB device file system: FAT12, FAT16, FAT32
Connect the MUTE wire to your telephone using a commercial telephone accessory. (
17
)
Even when audio files comply with the standards listed above, playback may be impossible
When a call comes in, “CALL” appears.
(The audio system pauses.)
depending on the types or conditions of media or device.
•
To continue listening to the audio system during a call, press . “CALL” disappears
and the audio system resumes.
When the call ends, “CALL” disappears.
(The audio system resumes.)
ENGLISH
13
JS_KWD_KMM_202_ENE2N_EN_5.indd 13JS_KWD_KMM_202_ENE2N_EN_5.indd 13 14/8/2015 9:39:48 AM14/8/2015 9:39:48 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
REFERENCES
Change the display information
Each time you press
DISP
, the display information changes.
•
If the information is unavailable or not recorded,
“NO TEXT”, “NO INFO”, or other information (eg. station name, playing time) appears.
Source name
/ / /
STANDBY
Source name (Date/Clock) Source name Clock (back to the beginning)
TUNER
Frequency (Date/Clock) Frequency Clock (back to the beginning)
(For FM Radio Data System stations only)
(For FM Radio Data System stations only)
Station name (Date/Clock) Radio text (Date/Clock) Radio text+ (R.TEXT+)
Station name Radio text Radio text+ Title/Artist Frequency Clock
Title (Artist)
Title (Date/Clock) Frequency (Date/Clock) (back to the beginning)
(back to the beginning)
USB
(For MP3/WMA/WAV/FLAC files)
(For MP3/WMA/WAV/FLAC files)
Track title (Artist) Track title (Album title) Track title (Date/Clock)
Track title/Artist Album title/Artist Folder name File name Playing time Clock
File name (Folder name)
File name (Date/Clock) Playing time (Date/Clock)
(back to the beginning)
(back to the beginning)
IPOD or
Track title (Artist) Track title (Album name) Track title (Date/Clock)
Track title/Artist
Album title/Artist Playing time Clock (back to the beginning)
ANDROID
Playing time (Date/Clock)
(back to the beginning)
AUX
Source name (Date/Clock) Source name Clock (back to the beginning)
14
JS_KWD_KMM_202_ENE2N_EN_5.indd 14JS_KWD_KMM_202_ENE2N_EN_5.indd 14 19/8/2015 12:02:50 PM19/8/2015 12:02:50 PM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
SPECIFICATIONS
FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space)
Maximum Output Power 50W×4
Usable Sensitivity (S/N=26dB) 0.71μV/75Ω
Full Bandwidth Power 22W×4 (at less than 1% THD)
Quieting Sensitivity
2.0μV/75Ω
Speaker Impedance 4Ω—8Ω
(DINS/N=46dB)
Tone Action Bass 100Hz±8dB
Frequency Response (±3dB) 30 Hz — 15 kHz
Audio
Middle 1.0kHz±8dB
Signal-to-Noise Ratio (MONO) 64 dB
Treble 12.5kHz±8dB
Tuner
Stereo Separation (1kHz) 40dB
Preout Level/Load (USB) 2500mV/10kΩ
MW Frequency Range 531kHz — 1611kHz (9kHz space)
Preout Impedance ≤600Ω
Usable Sensitivity (S/N=20dB) 28.2μV
Frequency Response (±3dB) 20Hz—20kHz
LW Frequency Range 153kHz — 279kHz (9kHz space)
Input Maximum Voltage 1000mV
Usable Sensitivity (S/N=20dB) 50.0μV
Auxiliary
Input Impedance 30kΩ
USB Standard USB1.1, USB2.0 Full Speed
Operating Voltage 14.4V (10.5V—16V allowable)
File System FAT12/16/32
Maximum Current Consumption 10A
Maximum Supply Current DC5V
1A
Operational Temperature Range –10°C—+60°C
Frequency Response (±1dB) 20Hz — 20kHz
General
Installation Size (W×H×D) 182mm×53mm×107mm
Signal-to-Noise Ratio (1kHz) 105 dB
Weight 0.6kg
Dynamic Range 88dB
USB
Channel Separation 90dB
Subject to change without notice.
MP3 Decode Compliant with MPEG-1/2 Audio Layer-3
WMA Decode Compliant with Windows Media Audio
WAV Decode Linear-PCM
FLAC Decode FLAC file (Up to 48kHz / 16bit)
ENGLISH
15
JS_KWD_KMM_202_ENE2N_EN_2.indd 15JS_KWD_KMM_202_ENE2N_EN_2.indd 15 10/7/2015 8:44:10 AM10/7/2015 8:44:10 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
Warning
Installing the unit (in-dash mounting)
•
The unit can only be used with a 12V DC power supply, negative ground.
•
Disconnect the battery’s negative terminal before wiring and mounting.
•
Do not connect Battery wire (yellow) and Ignition wire (red) to the car
chassis or Ground wire (black) to prevent a short circuit.
•
Insulate unconnected wires with vinyl tape to prevent a short circuit.
•
Be sure to ground this unit to the car’s chassis again after installation.
Do the required wiring.
(
17
)
Caution
•
For safety’s sake, leave wiring and mounting to professionals. Consult
the car audio dealer.
•
Install this unit in the console of your vehicle. Do not touch the metal
Hook on the top side
parts of this unit during and shortly after use of the unit. Metal parts
Orientate the trim plate as
such as the heat sink and enclosure become hot.
Dashboard of
illustrated before fitting.
•
Do not connect the
[
wires of speakers to the car chassis or Ground
your car
wire (black), or connect them in parallel.
•
Mount the unit at an angle of less than 30º.
•
If your vehicle wiring harness does not have the ignition terminal,
connect Ignition wire (red) to the terminal on the vehicle’s fuse box
Bend the appropriate tabs to hold the
which provides 12 V DC power supply and is turned on and off by the
mounting sleeve firmly in place.
ignition key.
INSTALLATION / CONNECTION
•
Keep all cables away from heat dissipate metal parts.
•
After the unit is installed, check whether the brake lamps, blinkers,
wipers, etc. on the car are working properly.
•
If the fuse blows, first make sure the wires are not touching car’s chassis,
then replace the old fuse with one that has the same rating.
How to remove the unit
1
Detach the faceplate.
Basic procedure
2 Fit the catch pin on the extraction
1
Remove the key from the ignition switch, then
keys into the holes on both sides of
disconnect the [ terminal of the car battery.
the trim plate, then pull it out.
2 Connect the wires properly.
3 Insert the extraction keys deeply into
See Wiring connection. (
17
)
the slots on each side, then follow the
3 Install the unit to your car.
arrows as shown on the right.
See Installing the unit (in-dash mounting).
4 Connect the [ terminal of the car battery.
5 Reset the unit. (
3
)
16
JS_KWD_KMM_202_ENE2N_EN_2.indd 16JS_KWD_KMM_202_ENE2N_EN_2.indd 16 10/7/2015 8:44:10 AM10/7/2015 8:44:10 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Wiring connection
When connecting to an
external amplifier, connect
If your car does not have an ISO terminal :
its ground wire to the car’s
We recommend installing the unit with a commercially
Front/ Rear/ Subwoofer output
chassis to avoid damaging
available custom wiring harness specific for your car and
the unit.
leave this job to professionals for your safety. Consult your
car audio dealer.
Antenna terminal
Part list for
Fuse (10A)
installation
(A)
Faceplate
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
If no connections are made, do not let the wire come out
wiring harness as illustrated below.
Yellow (Battery wire)
from the tab.
Ignition wire
A7 (Red)
(Red)
(B)
Trim plate
STEERING WHEEL
Red (Ignition wire)
Light blue/yellow
REMOTE INPUT
To the steering wheel
UnitVehicle
(Steering remote
REMOTE CONT
remote control adapter
A4 (Yellow)
Battery wire
control wire)
(Yellow)
(C)
Mounting sleeve
Default wiring
To the power control
Red (A7)
ANT CONT
terminal when using the
Blue/White
Pin
Color and function
optional power amplifier
(Power control
P. CONT
A4 Yellow : Battery
or to the antenna control
wire/ Antenna
A5 Blue/White : Power control
Yellow (A4)
terminal in the vehicle
control wire)
A7 Red : Ignition (ACC)
(D)
Wiring harness
A8 Black : Earth (ground) connection
B1
Purple
]
To the terminal that
: Rear speaker (right)
Brown
B2
Purple/black
[
is grounded when the
(Mute control
MUTE
telephone rings or during
B3
Gray
]
: Front speaker (right)
wire)
conversation (
13
)
B4
Gray/black
[
(To connect the Kenwood
(E)
Extraction key
B5
White
]
: Front speaker (left)
navigation system, refer your
B6
White/black
[
navigations manual.)
ISO connectors
B7
Green
]
: Rear speaker (left)
B8
Green/black
[
ENGLISH
17
JS_KWD_KMM_202_ENE2N_EN_2.indd 17JS_KWD_KMM_202_ENE2N_EN_2.indd 17 10/7/2015 8:44:11 AM10/7/2015 8:44:11 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
CОДЕРЖАНИЕ ПОДГОТОВКА К ЭКСПЛУАТАЦИИ
ПОДГОТОВКА К
ВАЖНО
ЭКСПЛУАТАЦИИ 2
•
В целях обеспечения надлежащей эксплуатации, пожалуйста, перед тем как приступить к эксплуатации данного изделия,
внимательно прочтите настоящее руководство. Особенно важно, чтобы вы прочли и соблюдали все указания в данном
ОСНОВНЫЕ СВЕДЕНИЯ 3
руководстве, отмеченные словами Предупреждение и Внимание.
•
Пожалуйста, держите данное руководство в надежном и доступном месте для обращения к нему за справками в
НАЧАЛО ЭКСПЛУАТАЦИИ 3
будущем.
1 Выбор языка отображения и
отмена демонстрации
Предупреждение
2 Установка часов и даты
Не используйте функции, которые отвлекают внимание и мешают безопасному вождению.
3 Установка начальных
Внимание
настроек
Настройка громкости:
•
Отрегулируйте громкость таким образом, чтобы слышать звуки за пределами автомобиля для предотвращения аварий.
РАДИОПРИЕМНИК 5
•
Уменьшите громкость перед воспроизведением, чтобы предотвратить повреждение динамиков из-за внезапного
повышения уровня громкости на выходе.
USB / iPod / ANDROID 7
Общие характеристики:
•
Не используйте внешние устройства, если это может отрицательно повлиять на безопасность движения.
AUX 9
•
Убедитесь в том, что созданы резервные копии всех важных данных. Мы не несем ответственность за потерю записанных
данных.
ЗВУКОВЫЕ НАСТРОЙКИ 10
•
Никогда не оставляйте металлические предметы (например, монеты или металлические инструменты) внутри устройства
во избежание коротких замыканий.
НАСТРОЙКИ ДИСПЛЕЯ 11
•
В зависимости от типа автомобиля антенна может автоматически выдвигаться при включении устройства, если
подключен провод управления антенной (
17
). При парковке в месте с низким потолком выключайте устройство или
УСТРАНЕНИЕ ПРОБЛЕМ 12
переключайте источник в режим STANDBY.
СПРАВОЧНЫЕ МАТЕРИАЛЫ
13
Обслуживание
Как пользоваться данным руководством
Дополнительная информация
•
Операции объясняются в основном с использованием кнопок на передней панели модели .
•
В объяснительных целях используются индикации на английском языке. Вы можете выбрать язык отображения из
ТЕХНИЧЕСКИЕ
меню [
FUNCTION
]. (
5
)
•
[
XX
] обозначает выбранные элементы.
ХАРАКТЕРИСТИКИ 15
•
(
XX
) означает, что материалы доступны на указанной странице.
УСТАНОВКА И
ПОДКЛЮЧЕНИЕ 16
2
JS_KWD_KMM_202_ENE2N_RU.indd 2JS_KWD_KMM_202_ENE2N_RU.indd 2 8/21/2015 10:08:22 AM8/21/2015 10:08:22 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
- 1
- 2
