Kenwood dpx306bt: инструкция

DPX406DAB

DPX306BT

DUAL DIN SIZED CD RECEIVER

INSTRUCTION MANUAL

DUALER DIN-GENORMTER CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-РЕСИВЕР РАЗМЕРА 2DIN

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

ПРИЙМАЧ CD ПОДВІЙНОГО DIN-РОЗМІРУ

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

B5A-0346-00 (EN)© 2014 JVC KENWOOD Corporation

JS_KWD_DPX406DAB_DPX306BT_EN_C00.indd 1JS_KWD_DPX406DAB_DPX306BT_EN_C00.indd 1 9/10/2014 10:02:51 AM9/10/2014 10:02:51 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

For Israel

Information on Disposal of Old Electrical and Electronic Equipment and Batteries

(applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as

household waste.

For Turkey

Old electrical and electronic equipment and batteries should be recycled at a facility capable of

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin

handling these items and their waste byproducts.

Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Contact your local authority for details in locating a recycle facility nearest to you. Proper

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün

recycling and waste disposal will help conserve resources whilst preventing detrimental effects

toplama sistemlerini kullanan ülkeleri için uygulanabilir)

on our health and the environment.

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak

Notice:

The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

atılamaz.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien

Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri

(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist

geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin.

darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf,

Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki

sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten

zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

und batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und

die Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere

Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den

kommunalen Entsorgungsbetrieben.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei

enthalt.

i

JS_KWD_DPX406DAB_DPX306BT_EN_S00.indd iJS_KWD_DPX406DAB_DPX306BT_EN_S00.indd i 9/10/2014 10:06:45 AM9/10/2014 10:06:45 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей”

срок службы (годности) данного товара “по истечении которого он может

The marking of products using lasers

представлять опасность для жизни, здоровья потребителя, причинять вред его

The label is attached to the chassis/case and says that the component uses laser beams that have

имуществу или окружающей среде” составляет семь (7) лет со дня производства.

been classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class.

Этот срок является временем, в течение которого потребитель данного товара

There is no danger of hazardous radiation outside the unit.

может безопасно им пользоваться при условии соблюдения инструкции по

эксплуатации данного товара, проводя необходимое обслуживание, включающее

Kennzeichnung von Geräten mit Laser-Abtastern

замену расходных материалов и/или соответствующее ремонтное обеспечение в

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen

специализированном сервисном центре.

bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das

Дополнительные косметические материалы к данному товару, поставляемые

Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch

вместе с ним, могут храниться в течение двух (2) лет со дня его производства.

den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts

Срок службы (годности), кроме срока хранения дополнительных косметических

besteht.

материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких

других прав потребителя, в частности, гарантийного свидетельства KENWOOD,

Маркировка изделий, использующих лазеры

которое он может получить в соответствии с законом о правах потребителя или

К корпусу устройства прикреплена табличка, указывающая, что устройство использует

других законов, связанных с ним.

лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой

интенсивности. Они не представляют опасности и не распространяют опасную радиацию вне

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження

устройства.

Використання деяких Небезпечних Речовин в електричному та електронному

обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Маркування виробів, обладнаних лазером

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє

Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

лазерні промені Класу 1. Це означає, що даний апарат використовує лазерні промені слабшого

класу. За межами даного апарату не існує небезпеки лазерного випромінювання.

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

1.

свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000

частин на мільйон;

2.

кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100

частин на мільйон;

3.

ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин

на мільйон;

4.

шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в

концентрації до 1000 частин на мільйон;

5.

полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації

до 1000 частин на мільйон;

6.

полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в

концентрації до 1000 частин на мільйон.

ii

JS_KWD_DPX406DAB_DPX306BT_EN_S00.indd iiJS_KWD_DPX406DAB_DPX306BT_EN_S00.indd ii 9/10/2014 10:06:46 AM9/10/2014 10:06:46 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Декларація про відповідність вимогам Директиви R&TTE 1999/5/EC

Декларація про відповідність вимогам Директиви EMC 2004/108/EC

Декларація про відповідність вимогам Директиви RoHS 2011/65/EU

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC

Виробник:

Declaration of Conformity with regard to the EMC Directive 2004/108/EC

JVC KENWOOD Corporation

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Manufacturer:

Представник у ЕС:

JVC KENWOOD Corporation

JVCKENWOOD NEDERLAND B.V.

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

EU Representative:

JVCKENWOOD NEDERLAND B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Konformitätserklärung in Bezug auf die R&TTE-Vorschrift 1999/5/EC

Konformitätserklärung in Bezug auf die EMC-Vorschrift 2004/108/EC

Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

JVCKENWOOD NEDERLAND B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Декларация соответствия относительно Директивы 1999/5/EC R&TTE

Декларация соответствия относительно Директивы 2004/108/EC Электромагнитная

совместимость

Декларация соответствия относительно Директивы 2011/65/EU об ограничении

содержания вредных веществ

Производитель:

ДжейВиСи КЕНВУД Корпорейшн

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония

Представительство в EC:

ДжейВиСиКЕНВУД Нидерланд Би.Ви.

Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды

iii

JS_KWD_DPX406DAB_DPX306BT_EN_S00.indd iiiJS_KWD_DPX406DAB_DPX306BT_EN_S00.indd iii 9/10/2014 10:06:46 AM9/10/2014 10:06:46 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

English

Italiano

Suomi

Lietuviškai

Hereby, JVC KENWOOD declares that this unit

Con la presente JVC KENWOOD dichiara che questo

JVC KENWOOD vakuuttaa täten että DPX406DAB/

Šiuo, JVC KENWOOD, pareiškia, kad šis

DPX406DAB/ DPX306BT is in compliance with

DPX406DAB/ DPX306BT è conforme ai requisiti

DPX306BT tyyppinen laite on direktiivin 1999/5/EY

DPX406DAB/ DPX306BT atitinka pagrindinius

the essential requirements and other relevant

essenziali ed alle altre disposizioni pertinenti

oleellisten vaatimusten ja sitä koskevien direktiivin

Direktyvos 1999/5/EB reikalavimus ir kitas svarbias

provisions of Directive 1999/5/EC.

stabilite dalla direttiva 1999/5/CE.

muiden ehtojen mukainen.

nuostatas.

Français

Español

Slovensko

Malti

Par la présente JVC KENWOOD déclare que

Por medio de la presente JVC KENWOOD declara

S tem JVC KENWOOD izjavlja, da je ta DPX406DAB/

Hawnhekk, JVC KENWOOD, jiddikjara li dan

l’appareil DPX406DAB/ DPX306BT est conforme

que el DPX406DAB/ DPX306BT cumple con

DPX306BT v skladu z osnovnimi zahtevami in

DPX406DAB/ DPX306BT jikkonforma mal-ħtiġijiet

aux exigences essentielles et aux autres

los requisitos esenciales y cualesquiera otras

ostalimi ustreznimi predpisi Direktive 1999/5/EC.

essenzjali u ma provvedimenti oħrajn relevanti li

dispositions pertinentes de la directive 1999/5/CE.

disposiciones aplicables o exigibles de la Directiva

Slovensky

hemm fid-Dirrettiva 1999/5/EC.

Par la présente, JVC KENWOOD déclare que

1999/5/CE.

Spoločnosť JVC KENWOOD týmto vyhlasuje, že

Українська

ce DPX406DAB/ DPX306BT est conforme aux

Português

DPX406DAB/ DPX306BT spĺňa zákldné požiadavky

Компанія JVC KENWOOD заявляє, що цей виріб

exigences essentielles et aux autres dispositions de

JVC KENWOOD declara que este DPX406DAB/

a ďalšie prislušné ustanovenia Direktĺvy 1999/5/EC.

DPX406DAB/ DPX306BT відповідає ключовим

la directive 1999/5/CE qui lui sont applicables.

DPX306BT está conforme com os requisitos

Dansk

вимогам та іншим пов’язаним положенням

Deutsch

essenciais e outras disposições da Directiva

Undertegnede JVC KENWOOD erklærer harved,

Директиви 1999/5/EC.

Hiermit erklärt JVC KENWOOD, dass sich dieser

1999/5/CE.

at følgende udstyr DPX406DAB/ DPX306BT

Turkish

DPX406DAB/ DPX306BT in Übereinstimmung

Polska

overholder de væsentlige krav og øvrige relevante

Bu vesileyle JVC KENWOOD, DPX406DAB/

mit den grundlegenden Anforderungen und den

JVC KENWOOD niniejszym oświadcza, że

krav i direktiv 1999/5/EF.

DPX306BT ünitesinin, 1999/5/EC Direktifinin

anderen relevanten Vorschriften der Richtlinie

DPX406DAB/ DPX306BT spełnia zasadnicze

Ελληνικά

başlıca gereksinimleri ve diğer ilgili hükümleri ile

1999/5/EG befindet. (BMWi)

wymogi oraz inne istotne postanowienia

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ JVC KENWOOD ΔΗΛΩΝΕΙ

uyumlu olduğunu beyan eder.

Hiermit erklärt JVC KENWOOD die

dyrektywy 1999/5/EC.

ΟΤΙ DPX406DAB/ DPX306BT ΣΥΜΜΟΡΦΩΝΕΤΑΙ

Русский

Übereinstimmung des Gerätes DPX406DAB/

Český

ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ

Настоящим, JVC КЕНВУД декларирует, что

DPX306BT mit den grundlegenden Anforderungen

JVC KENWOOD tímto prohlašuje, že tento

ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/EK.

это устройство “DPX406DAB/ DPX306BT”

und den anderen relevanten Festlegungen der

DPX406DAB/ DPX306BT je ve shodě se základními

соответствует необходимым требованиям

Richitlinie 1999/5/EG. (Wien)

Eesti

požadavky a dalšími příslušnými ustanoveními

Sellega kinnitab JVC KENWOOD, et see

и другим важным положениям директивы

Nederlands

směrnice 1999/5/ES.

DPX406DAB/ DPX306BT vastab direktiivi

1999/5/EC.

Hierbij verklaart JVC KENWOOD dat het toestel

Magyar

1999/5/EC põhilistele nõudmistele ja muudele

Україна

DPX406DAB/ DPX306BT in overeenstemming is

Alulírott, JVC KENWOOD, kijelenti, hogy a jelen

asjakohastele määrustele.

Цим, JVC KENWOOD декларує, що цей виріб

met de essentiële eisen en de andere relevante

DPX406DAB/ DPX306BT megfelel az 1999/5/

“DPX406DAB/ DPX306BT” Відповідає суттєвим

bepalingen van richtlijn 1999/5/EG.

Latviešu

EC irányelvben meghatározott alapvető

Bij deze verklaat JVC KENWOOD dat deze

Ar šo, JVC KENWOOD, apstiprina, ka DPX406DAB/

вимогам та іншим відповідним пунктам

követelményeknek és egyéb vonatkozó

Директиви 1999/5/EC.

DPX406DAB/ DPX306BT voldoet aan de essentiële

DPX306BT atbilst Direktīvas 1999/5/EK galvenajām

előírásoknak.

eisen en aan de overige relevante bepalingen van

prasībām un citiem tās nosacījumiem.

Richtlijn 1999/5/EC.

Svenska

Härmed intygar JVC KENWOOD att denna

DPX406DAB/ DPX306BT stär l överensstämelse

med de väsentliga egenskapskrav och övriga

relevanta bestämmelser som framgår av direktiv

1999/5/EG.

iv

JS_KWD_DPX406DAB_DPX306BT_EN_S00.indd ivJS_KWD_DPX406DAB_DPX306BT_EN_S00.indd iv 9/10/2014 10:06:46 AM9/10/2014 10:06:46 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CONTENTS BEFORE USE

BEFORE USE 2

Warning

Do not operate any function that takes your attention away from safe driving.

BASICS 3

GETTING STARTED 3

Caution

Volume setting:

DIGITAL RADIO (DAB)

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

(for )

5

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of

ANALOG RADIO 7

the output level.

General:

CD / USB / iPod / ANDROID 9

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded

AUX 11

data.

BLUETOOTH® 12

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short

circuit.

AUDIO SETTINGS 18

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to

evaporate.

DISPLAY SETTINGS 19

MORE INFORMATION 19

TROUBLESHOOTING 20

SPECIFICATIONS 22

INSTALLATION /

CONNECTION 24

Maintenance

How to read this manual

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.

• Operations are explained mainly

using buttons on the faceplate of

Handling discs:

.

• Do not touch the recording surface of the disc.

• English language is used for

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

the display explanation in this

• Do not use any accessories for the disc.

manual.

• Clean from the center of the disc and move outward.

• [

XX

] indicates the selected items.

• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

• (



XX

) indicates references are

• When removing discs from this unit, pull them out horizontally.

available on the stated page.

• Remove burrs from the center hole and disc edge before inserting a disc.

2

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 2JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 2 15/10/2014 12:09:43 PM15/10/2014 12:09:43 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BASICS

GETTING STARTED

Faceplate

Loading slot Display window

(For )

1

Select the display language and cancel the

demonstration

When you turn on the power (or after you reset the unit), the

display shows: “SELLANGUAGE”

“PRESS” “VOLUMEKNOB”

Volume knob

Reset button

1 Turn the volume knob to select [

ENG

] (English) or [

RUS

]

(turn/press)

• Your preset adjustments will

(Russian), then press the knob.

also be erased.

[

ENG

] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS”

To On the faceplate

“VOLUME KNOB”.

Turn on the power

Press

.

2 Press the volume knob.

• Press and hold to turn off the power.

[

YES

] is selected for the initial setup.

3 Press the volume knob again.

Adjust the volume Turn the volume knob.

“DEMOOFF” appears.

Press the volume knob during playback to attenuate the

sound.

2

Set the clock

• Press again to cancel.

1

Press FNC to enter [

FUNCTION

].

Select a source

Press

repeatedly.

2 Turn the volume knob to select [

CLOCK

], then press the

Change the display

Press

repeatedly.

knob.

information

• Press and hold to scroll the current display information.

3 Turn the volume knob to select [

CLOCKADJUST

], then press

the knob.

ENGLISH

3

JS_KWD_DPX406DAB_DPX306BT_EN_EN_4.indd 3JS_KWD_DPX406DAB_DPX306BT_EN_EN_4.indd 3 19/11/2014 4:43:20 PM19/11/2014 4:43:20 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

GETTING STARTED

4 Turn the volume knob to make the settings, then

TUNER SETTING

press the knob.

Day

Hour Minute

DAB L-BAND

*

ON

:Receives L-BAND ensemble during digital audio reception.;

OFF

:Cancels.

5 Turn the volume knob to select [

CLOCKFORMAT

], then

DAB ANT

ON

:Supplies power to the DAB antenna. Selects when using the supplied antenna.;

press the knob.

POWER

*

OFF

:Does not supply power. Selects when using passive antenna without booster. ( 

27

)

6 Turn the volume knob to select [

12H

] or [

24H

], then

press the knob.

PRESET TYPE NORMAL

:Memorizes one station for each preset button in each band (FM1/ FM2/

7 Press and hold to exit.

FM3/ MW/ LW/ DB1/ DB2/ DB3).;

MIX

:Memorizes one station for each preset button,

regardless of the selected band.

To return to the previous setting item, press .

SYSTEM

3

Set the initial settings

KEY BEEP

ON

:Activates the keypress tone.;

OFF

:Deactivates.

1

Press repeatedly to enter STANDBY.

SOURCE SELECT

2 Press FNC to enter [

FUNCTION

].

BUILT-IN AUX

ON

:Enables AUX in source selection.;

OFF

:Disables. ( 

11

)

• Pressing AUDIO enter [

AUDIO CONTROL

] directly.

3 Turn the volume knob to make a selection (see the

P-OFF WAIT

Applicable only when the demonstration mode is turned off.

following table), then press the knob.

Sets the duration when the unit will automatically turn off (while in standby mode) to save

4 Repeat step 3 until the desired item is selected or

the battery.

activated.

20M

: 20minutes;

40M

: 40minutes;

60M

: 60minutes;

WAIT TIME – – –

:Cancels

5 Press and hold to exit.

CD READ 1

:Automatically distinguishes between audio file disc and music CD.;

2

:Forces to play as a

To return to the previous setting item, press .

music CD. No sound can be heard if an audio file disc is played.

Default:

XX

F/W UPDATE

AUDIO CONTROL

UPDATE SYSTEM / UPDATE BT/ UPDATE DAB1

*

/ UPDATE DAB2

*

SWITCH

REAR

/

SUBWOOFER

: Selects whether rear speakers or

F/W UP xx.xx/

YES

:Starts upgrading the firmware.;

NO

:Cancels (upgrading is not activated).

PREOUT

a subwoofer are connected to the line out terminals on

F/W UP xxxxx/

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

the rear (through an external amplifier).

F/W UP Vxxx

SP SELECT OFF

/

5/4

/

6×9/6

/

OEM

: Selects according to the

CLOCK

speaker size (5inches or 4inches, 6×9inches or

6inches) or OEM speakers for optimum performance.

CLOCK DISPLAY

ON

:The clock time is shown on the display even when the unit is turned off.;

OFF

:Cancels.

DISPLAY

ENGLISH

Selected language is use as the display langauge for [

FUNCTION

] menu and Tag

EASY MENU

ON

:Both display and button illumination change

information (folder name, file name, song title, artist name, album name) if applicable.

РУССКИЙ

to white color when entering [

FUNCTION

].;

OFF

:Both display and button illumination remain as

*

For .

[

COLOR



SELECT

] color. ( 

19

)

4

JS_KWD_DPX406DAB_DPX306BT_EN_EN_4.indd 4JS_KWD_DPX406DAB_DPX306BT_EN_EN_4.indd 4 19/11/2014 4:54:42 PM19/11/2014 4:54:42 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

DIGITAL RADIO (DAB)

(for )

About DAB (Digital Audio Broadcasting)

DAB is one of the digital radio broadcasting systems

available today. It can deliver digital quality sound

without any annoying interference or signal distortion.

Furthermore, it can carry text, pictures and data.

In contrast to FM broadcast, where each program

is transmitted on its own frequency, DAB combines

several programs (called “services”) to form one

“ensemble.”

The “primary component” (main radio station)

is sometimes accompanied by a “secondary

component” which can contain extra programs or

other information.

Search for an ensemble

Preparation:

1

Press repeatedly to select DAB.

1 Connect a DAB antenna to the DAB antenna jack.

2 Press repeatedly to select DB1/ DB2/ DB3.

( 

27

)

3 Press and hold S/T to search for an ensemble.

2 Press to select DAB.

4 Press S/T to select an ensemble, service or component to listen.

3 Press and hold to start

• To change the searching method for S/T: Press and hold repeatedly.

the Service List update.

AUTO1 : Press S/T: Select an ensemble, service or component.

“LIST UPDATE” appears and update starts.

Press and hold S/T: Automatically search for an ensemble.

“UPDATED” appears when update completes.

AUTO2 : Press S/T: Search for a preset station.

Updates take up to3 minutes. No interruption

MANUAL : Press S/T: Select an ensemble, service or component.

(such as traffic information) is possible during

Press and hold S/T: Manually search for an ensemble.

updates.

• To store a service: Press and hold one of the number buttons (1to6).

• To cancel the Service List update: Press and hold

• To select a stored service: Press one of the number buttons (1to6).

again.

Select a service

1

Press and hold to enter Service Search mode.

2 Turn the volume knob to select a service, then press the knob.

To cancel the Service Search mode, press .

ENGLISH

5

JS_KWD_DPX406DAB_DPX306BT_EN_EN_4.indd 5JS_KWD_DPX406DAB_DPX306BT_EN_EN_4.indd 5 19/11/2014 4:43:21 PM19/11/2014 4:43:21 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BLUETOOTH®

BLUETOOTH — Connection

Pair a Bluetooth device

Supported Bluetooth profiles

When connecting a Bluetooth device to the unit for the first time, perform pairing between the

– Hands-Free Profile (HFP)

unit and the device.

– Serial Port Profile (SPP)

1 Press to turn on the unit.

– Phonebook Access Profile (PBAP)

2 Search and select this unit model name (DPX4

DAB/ DPX3

BT) on the Bluetooth

**

**

– Advanced Audio Distribution Profile (A2DP)

device.

– Audio/Video Remote Control Profile (AVRCP)

“PAIRING”

“PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” scrolls on the

Supported Bluetooth codecs

display.

– Sub Band Codec (SBC)

• For some Bluetooth devices, you may need to enter the Personal Identification Number

– Advanced Audio Coding (AAC)

(PIN) code immediately after searching.

– aptX Codec (aptX) (for

)

• Refer also to the manual supplied with your Bluetooth device.

3 Press the volume knob to start pairing.

“PAIRING OK” appears when pairing is completed and “

” will light up when the Bluetooth

Connect the microphone

connection is established.

Rear panel

• Up to five devices can be registered (paired) in total.

• Only one Bluetooth device can be connected at any time.

• This unit supports Secure Simple Pairing (SSP).

Microphone

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the

(supplied)

device to the unit manually. Refer to the instruction manual of the Bluetooth device for more

information.

Microphone input

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if

jack

you reset the unit. To delete the paired device,

16

, [

DEVICE DELETE

].

• When you connect iPhone/ iPod touch/ Android device to the USB input terminal, pairing

request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have

confirmed the device name.

Automatic pairing request is activated only if:

– Bluetooth function of the connected devcie is turned on.

– [

AUTO PAIRING

] is set to [

ON

]. (

16

)

Adjust the microphone

– KENWOOD MUSIC PLAY application is installed on the Android device.

angle

Secure using cord clamps (not

supplied) if necessary.

* For , connect to the microphone

input terminal.

( 25)

12

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 12JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 12 15/10/2014 12:09:47 PM15/10/2014 12:09:47 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

BLUETOOTH — Mobile phone

Improve the voice quality

While talking on the phone...

1 Press FNC to enter [

FUNCTION

].

2 Turn the volume knob to make a selection

(see the following table), then press the knob.

3 Repeat step 2 until the desired item is

selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

XX

MIC GAIN –10

—

+10

(

–4

):The sensitivity of

the microphone increases as the number

Receive a call

increased.

When there is an incoming call:

NR LEVEL –5

—

+5

(

0

):Adjust the noise reduction

– All the buttons flash.

level until the least noise is being heard

– The unit answers the call automatically if [

AUTO ANSWER

] is set to a selected time. ( 

14

)

during a phone conversation.

During a call:

ECHO CANCEL –5

—

+5

(

0

):Adjust the echo cancellation

– The buttons and display illuminate according to the settings made for [

DISPLAY

]. ( 

19

)

delay time until the least echo is being heard

– If you turn off the unit, the Bluetooth connection is disconnected.

during a phone conversation.

To On the faceplate

Answer a call

Press

or one of the number buttons (1 to 6).

Reject a call

Press

.

End a call

Press

or .

Adjust the phone volume

Turn the volume knob during a call.

[00]

to

[35]

(Default:

[15]*

)

• This adjustment will not affect the volume of the other

sources.

Switch between hands-free

Press 6 during a call.

and private talk modes

• Operations may vary according to the connected Bluetooth

device.

*

Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.

ENGLISH

13

JS_KWD_DPX406DAB_DPX306BT_EN_EN_3.indd 13JS_KWD_DPX406DAB_DPX306BT_EN_EN_3.indd 13 10/11/2014 12:19:43 PM10/11/2014 12:19:43 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BLUETOOTH®

Make the settings for receiving a

call

1

Press to enter

Bluetooth mode.

2 Turn the volume knob to make a

selection (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is

selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press

.

Default:

XX

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also

SETTINGS

possible if your mobile phone has the feature.

AUTO ANSWER

1

—

30

:The unit answers incoming

1 Press to enter Bluetooth mode.

call automatically in the selected

2 Turn the volume knob to make a selection (see the following table), then press the knob.

time (in seconds).;

OFF

:Cancels.

3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on

BATT/SIGNAL AUTO

:Shows the strength of the

the selected item.

battery and signal when the unit

4 Press and hold to exit.

detects a Bluetooth device and the

To return to the previous setting item, press .

Bluetooth device is connected.;

OFF

:Cancels. Clock time is shown.

CALL HISTORY

1

Press the volume knob to select a name or a phone number.

• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the display to indicate the

previous call status.

• Press

to change the display category (NUMBER or NAME).

• “NO DATA” appears if there is no recorded call history.

2

Press the volume knob to call.

14

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 14JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 14 15/10/2014 12:09:48 PM15/10/2014 12:09:48 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

PHONE BOOK

1

Turn the volume knob quickly to enter alphabet search mode (if the

Make a call using phone book

phonebook contains many contacts).

1

Press to enter phone book directly.

The first menu (ABCDEFGHIJK) appears.

2 Turn the volume knob to select a name, then press the knob.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

), turn the

*

3 Turn the volume knob to select a phone number, then press the

volume knob.

knob to call.

• To select the desired first letter, press

S/T

, then press the

knob.

Make a call using voice recognition

Select “1” to search with numbers and select “

” to search with

*

1

Press and hold to activate the connected phone.

symbols.

2 Speak the name of the contact you want to call or the voice

2

Turn the volume knob to select a name, then press the knob.

command to control the phone functions.

3

Turn the volume knob to select a phone number, then press the knob

to call.

• Supported Voice Recognition features vary for each phone. Refer to the

instruction manual of the connected phone for details.

•

If the phone supports PBAP, the phonebook of the connected phone is

• This unit also supports the intelligent personal assistant function of

automatically transferred to the unit when pairing.

iPhone.

•

Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL

•

This unit can display only non-accent letters. (Accent letters such as

“Ú” is showns as “U”.)

Delete a contact

(



Make a call using phone book

)

1

Press to enter Bluetooth mode.

NUMBER DIAL

1

Turn the volume knob to select a number (0 to 9) or character (

, #,

2 Turn the volume knob to select [

CALL HISTORY

], then press the knob.

*

+).

3 Turn the volume knob to select a contact.

2

Press

S/T

to move the entry position.

4 Press and hold the volume knob to enter delete mode.

Repeat steps

1

and

2

until you finish entering the phone number.

5 Turn the volume knob to select [

DELETE ONE

] or [

DELETE ALL

], then

3

Press the volume knob to call.

press the knob.

DELETE ONE

: Selected name or phone number in step 3 is deleted.

VOICE

Speak the name of the contact you want to call or the voice command to

DELETE ALL:

All names or phone numbers in [

CALL HISTORY

] in step 2 is

control the phone functions.

(

Make a call using voice recognition

)

deleted.

BATT

*

LOW

/

MID

/

FULL

:Shows the strength of the battery.

6 Turn the volume knob to select [

YES

], then press the knob.

SIGNAL

*

NO SIGNAL

/

LOW

/

MID

/

MAX

:Shows the strength of the current

7 Press and hold to exit.

received signal.

• To return to the previous setting item, press .

• Not applicable for mobile phone that supports PBAP.

*

Functionality depends on the type of the phone used.

ENGLISH

15

JS_KWD_DPX406DAB_DPX306BT_EN_EN_4.indd 15JS_KWD_DPX406DAB_DPX306BT_EN_EN_4.indd 15 19/11/2014 4:43:35 PM19/11/2014 4:43:35 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BLUETOOTH®

Settings in memory

Other settings

1

Press FNC to enter [

FUNCTION

].

Store a contact in memory

2 Turn the volume knob to make a selection (see the following table), then press the knob.

You can store up to 6 contacts into the number

3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated

buttons (1to6).

on the selected item.

1 Press to enter Bluetooth

4 Press and hold to exit.

mode.

To return to the previous setting item, press .

2 Turn the volume knob to select [

CALL HISTORY

],

[

PHONE BOOK

], or [

NUMBER DIAL

], then press the

Default:

XX

knob.

3 Turn the volume knob to select a contact or

BT MODE

enter a phone number.

PHONE SELECT

Selects the phone or audio device to connect or disconnect.

If a contact is selected, press the volume knob

“

” appears in front of the device name when connected.

to show the phone number.

*

•

You can only connect another Bluetooth device by disconnecting the connected Bluetooth device

4 Press and hold one of the number buttons (1

AUDIO SELECT

first.

to 6).

“

” disappears when disconnected.

“STORED” appears when the contact is stored.

*

To erase a contact from the preset memory, select

DEVICE DELETE

1

Turn the volume knob to select a device to delete, then press the knob.

[

NUMBER DIAL

] in step 2 and store a blank number.

2

Turn the volume knob to select [

YES

] or [

NO

], then press the knob.

PIN CODE EDIT

Changes the PIN code (up to 6 digits).

Make a call from memory

(0000)

1

Turn the volume knob to select a number.

1

Press to enter Bluetooth

2

Press

S

/

T

to move the entry position.

mode.

Repeat steps

1

and

2

until you finish entering the PIN code.

2 Press one of the number buttons (1 to 6).

3

Press the volume knob to confirm.

3 Press the volume knob to call.

RECONNECT ON

:The unit automatically reconnect when the last connected Bluetooth device is within range.;

“NO MEMORY” appears if there is no contacts

OFF

:Cancels.

stored.

AUTO PAIRING ON

:The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/ Android device)

when it is connected through USB input terminal.Depending on the operating system of the

connected device, this function may not work. ;

OFF

:Cancels.

INITIALIZE YES

:Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.).;

NO

:Cancels.

16

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 16JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 16 15/10/2014 12:09:49 PM15/10/2014 12:09:49 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

BLUETOOTH — Audio

Bluetooth test mode

You can check the connectivity of the supported

profile between the Bluetooth device and the

unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold .

“PLEASE PAIR YOUR PHONE PIN 0000”

appears.

2 Search and select this unit model name

(DPX4

DAB/ DPX3

BT) on the Bluetooth

**

**

device.

3 Operate the Bluetooth device to confirm

pairing.

“TESTING” flashes on the display.

Audio player via Bluetooth

The connectivity result (OK or NG) appears after

1

Press repeatedly to select BTAUDIO.

the test.

2 Operate the Bluetooth audio player to start playback.

PAIRING: Pairing status

HF CNT: Hands-Free Profile (HFP) compatibility

To On the faceplate

AUD CNT: Advanced Audio Distribution Profile

Playback / pause

Press

.

(A2DP) compatibility

PB DL: Phonebook Access profile (PBAP)

Select group or folder Press 1/2.

compatibility

Reverse / Forward skip

Press S/T.

To cancel test mode, press and hold

to

Reverse / Fast-forward

Press and hold S/T.

turn off the unit.

Repeat play Press

repeatedly.

ALLREPEAT

,

FILEREPEAT

,

REPEATOFF

Random play Press repeatedly.

FOLDERRANDOM

,

RANDOMOFF

Press and hold to select

ALLRANDOM

.

Operations and display indications may differ according to their availability on the connected

device.

ENGLISH

17

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 17JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 17 15/10/2014 12:09:49 PM15/10/2014 12:09:49 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

While listening to any source...

PRESET EQ DRIVEEQ

/

TOP40

/

POWERFUL

/

ROCK

/

POPS

/

EASY

/

JAZZ

/

1 Press AUDIO to enter [

AUDIOCONTROL

].

NATURAL

/

USER

:Selects a preset equalizer suitable to the music

2 Turn the volume knob to make a selection (see the following table),

genre. (Select [

USER

] to use the customized settings.)

then press the knob.

[

DRIVE EQ

] is a preset equalizer that reduces noise outside the car or

3 Repeat step 2 until the desired item is selected or activated.

running noise of the tyres.

4 Press and hold to exit.

BASSBOOST LEVEL1

/

LEVEL2

/

LEVEL3

:Selects your preferred bass boost level.;

To return to the previous setting item, press .

OFF

:Cancels.

Default:

XX

LOUDNESS LEVEL1

/

LEVEL2

:Selects your preferred low and high frequencies

SUB-WLEVEL –15

to

+15

(

0

) Adjusts the subwoofer output level.

boost to produce a well-balanced sound at a low volume level.;

OFF

:Cancels.

BASSLEVEL –8

to

+8

(

+6

)

Adjusts the level to memorize for each source.

SUBWOOFERSET ON

:Turns on the subwoofer output.;

OFF

:Cancels.

MIDLEVEL –8

to

+8

(

+5

)

(Before making an adjustment, select the source

you want to adjust.)

LPFSUBWOOFER THROUGH

:All signals are sent to the subwoofer.;

85HZ

/

120HZ

/

TRELEVEL –8

to

+8

(

0

)

160HZ

:Audio signals with frequencies lower than 85Hz/ 120Hz/

EQ PRO

160Hz are sent to the subwoofer.

BASS ADJUST BASS CTR FRQ

60HZ

/

80HZ

/

100HZ

/

200HZ

: Selects the center

SUB-WPHASE REVERSE

(180°)/

NORMAL

(0°):Selects the phase of the subwoofer

frequency.

output to be in line with the speaker output for optimum performance.

(Selectable only if a setting other than [

THROUGH

] is selected for

BASS LEVEL –8

to

+8

(

+6

):Adjusts the level.

[

LPFSUBWOOFER

].)

BASS Q FACTOR 1.00

/

1.25

/

1.50

/

2.00

:Adjusts the quality factor.

FADER R15

to

F15

(

0

):Adjusts the rear and front speaker output balance.

BASS EXTEND ON

:Turns on the extended bass.;

OFF

:Cancels.

BALANCE L15

to

R15

(

0

):Adjusts the left and right speaker output balance.

MID ADJUST MID CTR FRQ 0.5KHZ

/

1.0KHZ

/

1.5KHZ

/

2.5KHZ

:Selects the

VOLUMEOFFSET

For AUX:

–8

to

+8

(

0

) ; For other sources:

–8

to

0

:Presets the volume

center frequency.

adjustment level of each source. (Before adjustment, select the source

MID LEVEL –8

to

+8

(

+5

):Adjusts the level.

you want to adjust.)

MID Q FACTOR 0.75

/

1.00

/

1.25

:Adjusts the quality factor.

SOUNDRECNSTR

ON

:Creates realistic sound by compensating the high-frequency

TRE ADJUST TRE CTR FRQ 10.0KHZ

/

12.5KHZ

/

15.0KHZ

/

17.5KHZ

:Selects

(Sound

components and restoring the rise-time of the waveform that are lost

the center frequency.

reconstruction)

in audio data compression.;

OFF

:Cancels.

TRE LEVEL –8

to

+8

(

0

):Adjusts the level.

• [

SUB-W LEVEL

]/ [

SUBWOOFER SET

]/ [

LPF SUBWOOFER

]/ [

SUB-W PHASE

] is

selectable only if [

SWITCH PREOUT

] is set to [

SUBWOOFER

]. ( 

4

)

• [

SUB-WLEVEL

]/ [

LPFSUBWOOFER

]/ [

SUB-WPHASE

] is selectable only if

[

SUBWOOFERSET

] is set to [

ON

].

18

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 18JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 18 15/10/2014 12:09:49 PM15/10/2014 12:09:49 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

DISPLAY SETTINGS

MORE INFORMATION

1 Press FNC to enter [

FUNCTION

].

General

2 Turn the volume knob to select [

DISPLAY

], then press the knob.

•

This unit can only play the following CDs:

3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected/activated or follow

the instructions stated on the selected item.

•

Detailed information and notes about the playable audio files are stated in an online manual

5 Press and hold to exit.

on the following web site: www.kenwood.com/cs/ce/audiofile/

To return to the previous setting item, press .

Playable files

Default:

XX

•

Playable audio file: MP3 (.mp3), WMA (.wma), AAC (.m4a)

•

COLOR SELECT VARIABLESCAN

/

CUSTOM R/G/B

/

preset colors*: Selects your preferred

Playable disc media: CD-R/CD-RW/CD-ROM

•

button and display illumination color.

Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.

•

Playable USB device file system: FAT12, FAT16, FAT32

You can create your own color (when [

CUSTOM R/G/B

] or preset colors*

is

Even when audio files comply with the standards listed above, playback may be impossible

selected). The color you have created can be stored in [

CUSTOM R/G/B

].

depending on the types or conditions of media or device.

1

Press and hold the volume knob to enter the detailed color adjustment.

2

Press

S

/

T

to select the color (

R

/

G

/

B

) to adjust.

Unplayable discs

3

Turn the volume knob to adjust the level (0 — 9), then press the knob.

•

Discs that are not round.

DIMMER ON

:Dims the display illumination and button illumination.;

OFF

:Cancels.

•

Discs with coloring on the recording surface or discs that are dirty.

•

Recordable/ReWritable discs that have not been finalized.

BRIGHTNESS 0

—

31

: Selects your preferred brightness level for display illumination

•

8cm CD. Attempting to insert using an adapter may cause malfunction.

and button illumination.

TEXTSCROLL AUTO

/

ONCE

:Selects whether to scroll the display information

About USB devices

automatically, or scroll only once.;

OFF

:Cancels.

•

This unit can play MP3/WMA/AAC/WAV files stored on a USB mass storage class device.

•

You cannot connect a USB device via a USB hub.

*

Preset colors:

RED1

/

RED2

/

RED3

/

PURPLE1

/

PURPLE2

/

PURPLE3

/

PURPLE4

/

BLUE1

/

•

Connecting a cable whose total length is longer than 5m may result in abnormal playback.

BLUE2

/

BLUE3

/

SKYBLUE1

/

SKYBLUE2

/

LIGHTBLUE

/

AQUA1

/

AQUA2

/

GREEN1

/

•

This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1A.

GREEN2

/

GREEN3

/

YELLOWGREEN1

/

YELLOWGREEN2

/

YELLOW

/

ORANGE1

/

ORANGE2

/

ORANGERED

About KENWOOD Music Editor Light and KENWOOD Music Control

•

This unit supports the PC application KENWOOD Music Editor Light and Android™ application

KENWOOD Music Control.

•

When you play audio files with song data added using the KENWOOD Music Editor Light or

KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists,

and Songs.

•

KENWOOD Music Editor Light and KENWOOD Music Control are available on the following

web site: www.kenwood.com/cs/ce/

ENGLISH

19

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 19JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 19 15/10/2014 12:09:49 PM15/10/2014 12:09:49 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

MORE INFORMATION

TROUBLESHOOTING

About iPod/iPhone

Symptom Remedy

Made for

-

iPod touch (2nd, 3rd, 4th, and 5th generation)

Sound cannot be heard.

•

Adjust the volume to the optimum level.

-

iPod classic

•

Check the cords and connections.

-

iPod nano (3rd, 4th, 5th, 6th, and 7th generation)

“MISWIRING CHECK WIRING

Turn the power off, then check to be sure the

-

iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C

THEN PWR ON” appears.

terminals of the speaker wires are insulated properly.

•

For the latest compatible list and software versions of iPhone/iPod, see:

Turn the power on again.

www.kenwood.com/cs/ce/ipod

General

•

You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.

“PROTECTING SEND SERVICE”

Send the unit to the nearest service center.

appears.

About Android device

The unit does not work at all. Reset the unit. (



3

)

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory

DAB reception is poor. Make sure [

ON

] is selected for [

DAB ANT POWER

].

(AOA) 2.0.

(



4

)

•

If the Android device supports both mass storage class device and AOA 2.0, this unit always

“DAB ANT ERR” Check the DAB antenna. If a passive antenna (without

playback via AOA 2.0 as priority.

a booster) is used, set [

DAB ANT POWER

] to [

OFF

].

•

For more information and the latest compatible list, see: www.kenwood.com/cs/ce/

(



4

)

Digital Radio

“RELATED SERV FOUND”

•

Press the volume knob to activate Soft-Link. ( 

6

)

About Bluetooth

•

•

Press to cancel.

Depending on the Bluetooth version of the device, some Bluetooth devices may not be able

to connect to this unit.

•

Radio reception is poor.

•

Connect the antenna firmly.

•

This unit may not work with some Bluetooth devices.

•

Static noise while listening

•

Pull the antenna out all the way.

•

Signal conditions vary, depending on the surroundings.

Analog

Radio

to the radio.

•

For more information about Bluetooth, visit the following website:

Disc cannot be ejected.

Press and hold

M

to forcibly eject the disc. Be careful

www.kenwood.com/cs/ce/

not to drop the disc when it is ejected. If this does not

solve the problem, reset the unit. (



3

)

Noise is generated. Skip to another track or change the disc.

Tracks do not play back as

Playback order is determined when files are recorded.

you intended them to play.

CD / USB / iPod

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

Elapsed playing time is not

This is caused by how the tracks are recorded.

correct.

20

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 20JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 20 15/10/2014 12:09:49 PM15/10/2014 12:09:49 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

TROUBLESHOOTING

Symptom Remedy

Symptom Remedy

Correct characters are

This unit can only display uppercase letters, numbers, and a

Cannot playback at

•

Make sure KENWOOD MUSIC PLAY APP is installed on

not displayed (e.g.

limited number of symbols. Uppercase Cyrillic letters can also

[

BROWSE MODE

].

the Android device. (



10

)

album name).

be displayed if [

РУССКИЙ

] is selected. ( 

4

)

•

Reconnect the Android device and make the

appropriate setting in [

ANDROID SETUP

]. ( 

11

)

“NA FILE” Make sure the disc contains supported audio files.

•

If this does not solve the problem, the connected

(



19

)

Android device does not support [

BROWSE MODE

].

“NO DISC” Insert a playable disc into the loading slot.

(



20

)

“TOC ERROR” Make sure the disc is clean and inserted properly.

“NO DEVICE” or “READING”

•

Switch off the developer options on the Android

keeps flashing.

device.

“PLEASE EJECT” Reset the unit. If this does not solve the problem, consult your

•

nearest service center.

ANDROID

Reconnect the Android device.

•

If this does not solve the problem, the connected

“READ ERROR” Copy the files and folders onto the USB device again. If this

Android device does not support [

BROWSE MODE

].

does not solve the problem, reset the USB device or use

CD / USB / iPod

(



20

)

another USB device.

Playback is intermittent or

Turn off the power saving mode on the Android device.

“NO DEVICE” Connect a USB device, and change the source to USB again.

sound skips.

“COPY PRO” A copy-protected file is played.

“ANDROID ERROR” /

•

Reconnect the Android device.

“NADEVICE”

•

Restart the Android device.

“NA DEVICE”

Connect a supported USB device, and check the connections.

No Bluetooth device is

•

Search from the Bluetooth device again.

“NO MUSIC” Connect a USB device that contains playable audio files.

detected.

•

Reset the unit. ( 

3

)

“iPod ERROR”

•

Reconnect the iPod.

Bluetooth pairing cannot

•

•

Make sure you have entered the same PIN code to

Reset the iPod.

be made.

both the unit and Bluetooth device.

•

Sound cannot

•

Reconnect the Android device.

•

Delete pairing information from both the unit and the

be heard during

•

If in [

HAND MODE

], launch any media player application

Bluetooth device, then perform pairing again. (



12

)

playback.

on the Android device and start playback.

•

•

•

Echo or noise is heard

Adjust the microphone unit’s position. ( 

12

)

Sound output only

If in [

HAND MODE

], relaunch the current media player

Bluetooth®

during a phone

•

Check the [

ECHO CANCEL

] setting. ( 

13

)

from the Android

application or use another media player application.

ANDROID

device.

•

conversation.

Restart the Android device.

•

If this does not solve the problem, the connected Android

Phone sound quality

•

Reduce the distance between the unit and the

device is unable to route the audio signal to unit. (



20

)

is poor.

Bluetooth device.

•

Move the car to a place where you can get a better

signal reception.

ENGLISH

21

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 21JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 21 15/10/2014 12:09:49 PM15/10/2014 12:09:49 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

INSTALLATION / CONNECTION

Caution

2 Clean the windscreen with the supplied

Installation overview

When installing the antenna cable inside the front

cleaner (H).

The antenna should be installed on the passenger side

pillar with the air bag installed

for safety.

(H)

•

The front pillar cover is secured with a special clip which

may need to be replaced when it is removed.

(E)

Contact your vehicle dealer for details on removing the

front pillar cover and availability of replacement parts.

– Wait until the glass surface is completely

dry before proceeding.

– Warm the surface of the windscreen with

defroster if it is cold (during winter).

Clip

(F)

3 Remove the separator (tag 1) of film

Front pillar

antenna (E) horizontally and paste the

antenna on the windscreen.

•

Install the amplifier unit

(F)

above the air bag so that it

Antenna installation

Separator (tag 1)

does not obstruct the operation of the air bag.

1

Remove the front pillar cover of your car.

(F)

Front pillar

(E)

Air bag

Do not touch the pasting surface (adhesive

side) of the film antenna (E).

28

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 28JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 28 15/10/2014 12:09:51 PM15/10/2014 12:09:51 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

INSTALLATION / CONNECTION

4 Rub the film antenna gently onto the

6 Set the postion of the protrusion of the

7 Remove the film covering the earth sheet

windscreen in the direction of the arrow

amplifier unit (F) with the K on the film

and paste the earth sheet on the metal

shown to allow it to stick firmly.

antenna (E) and paste.

part of the vehicle.

Do not touch the lead terminal or the

Provide sufficient leeway for the earth sheet

pasting surface (adhesive side) of the

so that it does not interfere with the interior

amplifier unit (F).

parts (front pillar cover). Also take care that

• When installing the antenna on the right

the interior parts do not interfere with the

side

amplifier unit (F).

(E)

(F)

Earth sheet

Windscreen

(E)

Earth sheet

Set the position of

the protrusion with

(F)

K

mark

Front pillar cover

8 Wire the antenna cables.

Use cable clamper (G) to secure the

Lead terminal of the

antenna to the pillar at several positions.

5 Remove the separator (tag 2) of film

film antenna

(E)

9 Attach the front pillar cover back to its

antenna (E) vertically.

Lead contact of the amplifier

original position.

unit (metal part)

Be sure not to damage the earth sheet and

Separator (tag 2)

amplifier unit (F) when covering.

• When installing the antenna on the left

10 Connect the amplifier unit (F) to the DAB

side

input terminal on the rear of the unit.

11 Set [

DAB ANT POWER

] to [

ON

]. ( 

4)

(E)

(E)

Earth sheet

(F)

ENGLISH

29

JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 29JS_KWD_DPX406DAB_DPX306BT_EN_EN_1.indd 29 15/10/2014 12:09:52 PM15/10/2014 12:09:52 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)