Kenwood KDC-BT510U: инструкция
Раздел: Авто, мото оборудование и транспорт
Тип: Автомагнитола
Характеристики, спецификации
Инструкция к Автомагнитоле Kenwood KDC-BT510U
KDC-BT510U
CD-RECEIVER
INSTRUCTION MANUAL
CD-RECEIVER
BEDIENUNGSANLEITUNG
SINTOLETTORE STEREO COMPACT DISC
ISTRUZIONI PER L’USO
CD-PECИBEP
ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ
B5A-1336-00 (EN)© 2016 JVC KENWOOD Corporation
JS_KWD_KDC_BT510U_EN_C_2.indd 1JS_KWD_KDC_BT510U_EN_C_2.indd 1 01-Sep-16 11:22:13 AM01-Sep-16 11:22:13 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
For Israel
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries
that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and
their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal
will help conserve resources whilst preventing detrimental effects on our health and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in
Ländern mit einem separaten Sammelsystem für solche Geräte)
Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt
nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von
elektrischen und elektronischen Geräten und batterien abgegeben werden muss.
Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer
Mitmenschen.
Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling
dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben.
Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.
Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e delle batterie
(valide per i paesi che hanno adottato sistemi di raccolta differenziata)
I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono essere smaltiti
insieme ai normali rifiuti di casa.
I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un’apposita struttura in grado di trattare
questi prodotti e di smaltirne i loro componenti.
Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l’apposito ufficio comunale. Un
appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla salute e all’ambiente.
Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene piombo.
i
JS_KWD_KDC_BT510U_EN_C_2.indd iJS_KWD_KDC_BT510U_EN_C_2.indd i 01-Sep-16 11:22:14 AM01-Sep-16 11:22:14 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Дата изготовления (месяц/год) находится на этикетке устройства.
В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы
The marking of products using lasers
(годности) данного товара “по истечении которого он может представлять опасность для жизни,
The label is attached to the chassis/case and says that the component uses laser beams that have been
здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7)
classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no
лет со дня производства.
danger of hazardous radiation outside the unit.
Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут
храниться в течение двух (2) лет со дня его производства.
Kennzeichnung von Geräten mit Laser-Abtastern
Срок службы (годности), кроме срока хранения дополнительных косметических материалов,
Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen
упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в
bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät
частности, гарантийного обслуживания KENWOOD, которое он может получить в соответствии с
Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr
законом о правах потребителя или других законов, связанных с ним.
schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.
Условия хранения:
Etichetta per i prodotti che impiegano raggi laser
Температура : от -30°C до +85°C
L’etichetta si trova sul rivestimento o sulla scatola e serve ad avvertire che il componente impiega raggi
Влажность : от 0% до 90%
laser che sono stati classificati come classe 1. Ciò significa che l’apparecchio utilizza raggi laser di una classe
inferiore. Non c’è alcun pericolo di radiazioni pericolose all’esterno dell’apparecchio
Маркировка изделий, использующих лазеры
К корпусу устройства прикреплена табличка, указывающая, что устройство использует лазерные
лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой интенсивности.
Они не представляют опасности и не распространяют опасную радиацию вне устройства.
ii
JS_KWD_KDC_BT510U_EN_C_2.indd iiJS_KWD_KDC_BT510U_EN_C_2.indd ii 01-Sep-16 11:22:15 AM01-Sep-16 11:22:15 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
English
Español
Hereby, JVCKENWOOD declares that the radio equipment
Por la presente, JVCKENWOOD declara que el equipo de
“KDC-BT510U” is in compliance with Directive 2014/53/EU.
radio “KDC-BT510U” cumple la Directiva 2014/53/EU.
The full text of the EU declaration of conformity is available
El texto completo de la declaración de conformidad con la
Declaration of Conformity with regard to the RE Directive 2014/53/EU
at the following internet address:
UE está disponible en la siguiente dirección de internet:
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
http://www.kenwood.com/cs/ce/eudoc/
http://www.kenwood.com/cs/ce/eudoc/
Manufacturer:
Français
Português
JVC KENWOOD Corporation
Par la présente, JVCKENWOOD déclare que l’équipement
Deste modo, a JVCKENWOOD declara que o equipamento
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
radio « KDC-BT510U » est conforme à la directive
de rádio “KDC-BT510U” está em conformidade com a
EU Representative:
2014/53/UE.
Diretiva 2014/53/UE.
JVCKENWOOD NEDERLAND B.V.
L’intégralité de la déclaration de conformité UE est
O texto integral da declaração de conformidade da UE está
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
disponible à l’adresse Internet suivante :
disponível no seguinte endereço de internet:
http://www.kenwood.com/cs/ce/eudoc/
http://www.kenwood.com/cs/ce/eudoc/
Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU
Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU
Deutsch
Polska
Hiermit erklärt JVCKENWOOD, dass das Funkgerät
Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy
Hersteller:
“KDC-BT510U” der Richtlinie 2014/53/EU entspricht.
“KDC-BT510U” jest zgodny z dyrektywą 2014/53/UE.
JVC KENWOOD Corporation
Der volle Text der EU-Konformitätserklärung steht unter
Pełny tekst deklaracji zgodności EU jest dostępny pod
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
der folgenden Internetadresse zur Verfügung:
adresem:
EU-Vertreter:
http://www.kenwood.com/cs/ce/eudoc/
http://www.kenwood.com/cs/ce/eudoc/
JVCKENWOOD NEDERLAND B.V.
Nederlands
Český
Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande
Hierbij verklaart JVCKENWOOD dat de radioapparatuur
Společnost JVCKENWOOD tímto prohlašuje, že rádiové
“KDC-BT510U” in overeenstemming is met Richtlijn
zařízení “KDC-BT510U” splňuje podmínky směrnice
Dichiarazione di conformità alla Direttiva RE 2014/53/EU
2014/53/EU.
2014/53/EU.
Dichiarazione di conformità relativa alla direttiva RoHS 2011/65/EU
De volledige tekst van de EU-verklaring van
Plný text EU prohlášení o shodě je dostupný na následující
Produttore:
overeenstemming is te vinden op het volgende
internetové adrese:
JVC KENWOOD Corporation
internetadres:
http://www.kenwood.com/cs/ce/eudoc/
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
http://www.kenwood.com/cs/ce/eudoc/
Magyar
Rappresentante UE:
Italiano
JVCKENWOOD ezennel kijelenti, hogy a „KDC-BT510U“
JVCKENWOOD NEDERLAND B.V.
Con la presente, JVCKENWOOD dichiara che l΄apparecchio
rádióberendezés megfelel a 2014/53/EU irányelvnek.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
radio “KDC-BT510U” è conforme alla Direttiva
Az EU konformitási nyilatkozat teljes szövege az alábbi
2014/53/UE.
weboldalon érhető el:
Декларация соответствия относительно Директивы 2014/53/EU RE
Il testo integrale della dichiarazione di conformità UE è
http://www.kenwood.com/cs/ce/eudoc/
Декларация соответствия относительно Директивы 2011/65/EU об
disponibile al seguente indirizzo internet:
ограничении содержания вредных веществ
http://www.kenwood.com/cs/ce/eudoc/
Производитель:
ДжейВиСи КЕНВУД Корпорейшн
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония
Представительство в EC:
ДжейВиСиКЕНВУД Нидерланд Би.Ви.
Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды
iii
JS_KWD_KDC_BT510U_EN_C_2.indd iiiJS_KWD_KDC_BT510U_EN_C_2.indd iii 01-Sep-16 11:22:15 AM01-Sep-16 11:22:15 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Svenska
Dansk
Lietuviškai
БЪЛГАРСКИ
Härmed försäkrar JVCKENWOOD att
Herved erklærer JVCKENWOOD, at radioudstyret
Šiuo JVCKENWOOD pažymi, kad radijo įranga
С настоящото JVCKENWOOD декларира, че
radioutrustningen “KDC-BT510U” är i enlighet
“KDC-BT510U” er i overensstemmelse med
„KDC-BT510U“ atitinka 2014/53/EB direktyvos
радиооборудването на “KDC-BT510U” е в
med direktiv 2014/53/EU.
Direktiv 2014/53/EU.
reikalavimus.
съответствие с Директива 2014/53/ЕС.
Den fullständiga texten av EU-försäkran
EU-overensstemmelseserklæringens fulde ordlyd
Visą EB direktyvos atitikties deklaracijos tekstą
Пълният текст на ЕС декларацията за
om överensstämmelse finns på följande
er tilgængelig på følgende internetadresse:
galite rasti šiuo internetiniu adresu:
съответствие е достъпен на следния интернет
Internetadress:
http://www.kenwood.com/cs/ce/eudoc/
http://www.kenwood.com/cs/ce/eudoc/
адрес:
http://www.kenwood.com/cs/ce/eudoc/
http://www.kenwood.com/cs/ce/eudoc/
Ελληνικά
Malti
Suomi
Με το παρόν, η JVCKENWOOD δηλώνει ότι ο
B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-
Turkish
JVCKENWOOD julistaa täten, että radiolaite
ραδιοεξοπλισμός «KDC-BT510U» συμμορφώνεται
radju “KDC-BT510U” huwa konformi
Burada, JVCKENWOOD “KDC-BT510U” radyo
“KDC-BT510U” on direktiivin 2014/53/EU
με την Οδηγία 2014/53/ΕΕ.
mad-Direttiva 2014/53/UE.
ekipmanının 2014/53/AB Direktifine uygun
mukainen.
Το πλήρες κείμενο της δήλωσης συμμόρφωσης
It-test kollu tad-dikjarazzjoni ta’ konformità huwa
olduğunu bildirir.
EU-vaatimustenmukaisuusvakuutusvaatimus
της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση
disponibbli fl-indirizz intranet li ġej:
AB uyumluluk deklarasyonunun tam metni
löytyy kokonaisuudessaan seuraavasta internet-
στο διαδίκτυο:
http://www.kenwood.com/cs/ce/eudoc/
aşağıdaki internet adresinde mevcuttur.
osoitteesta:
http://www.kenwood.com/cs/ce/eudoc/
http://www.kenwood.com/cs/ce/eudoc/
HRVATSKI / SRPSKI JEZIK
http://www.kenwood.com/cs/ce/eudoc/
Eesti
JVCKENWOOD ovim izjavljuje da je radio oprema
Русский
Slovensko
Käesolevaga JVCKENWOOD kinnitab, et
“KDC-BT510U” u skladu s Direktivom 2014/53/EU.
JVCKENWOOD настоящим заявляет,
S tem JVCKENWOOD izjavlja, da je radijska oprema
„KDC-BT510U“ raadiovarustus on vastavuses
Cjeloviti tekst deklaracije Europske unije o
что радиооборудование «KDC-BT510U»
»KDC-BT510U« v skladu z Direktivo 2014/53/EU.
direktiiviga 2014/53/EL.
usklađenosti dostupan je na sljedećoj internet
соответствует Директиве 2014/53/EU.
Celotno besedilo direktive EU o skladnosti je
ELi vastavusdeklaratsiooni terviktekst on
adresi:
Полный текст декларации соответствия
dostopno na tem spletnem naslovu:
kättesaadav järgmisel internetiaadressil:
http://www.kenwood.com/cs/ce/eudoc/
ЕС доступен по следующему адресу в сети
http://www.kenwood.com/cs/ce/eudoc/
http://www.kenwood.com/cs/ce/eudoc/
Интернет:
ROMÂNĂ
http://www.kenwood.com/cs/ce/eudoc/
Slovensky
Latviešu
Prin prezenta, JVCKENWOOD declară că
Spoločnosť JVCKENWOOD týmto vyhlasuje, že
JVCKENWOOD ar šo deklarē, ka radio aparatūra
echipamentul radio “KDC-BT510U” este în
Українська
rádiové zariadenie „KDC-BT510U“ vyhovuje
„KDC-BT510U” atbilst direktīvas 2014/53/ES
conformitate cu Directiva 2014/53/UE.
Таким чином, компанія JVCKENWOOD заявляє,
smernici 2014/53/EÚ.
prasībām.
Textul integral al declarației de conformitate UE
що радіообладнання «KDC-BT510U» відповідає
Celý text EÚ vyhlásenia o zhode nájdete na
Pilns ES atbilstības deklarācijas teksts ir pieejams
este disponibil la urmatoarea adresă de internet:
Директиві 2014/53/EU.
nasledovnej internetovej adrese:
šādā tīmekļa adresē:
http://www.kenwood.com/cs/ce/eudoc/
Повний текст декларації про відповідність ЄС
http://www.kenwood.com/cs/ce/eudoc/
http://www.kenwood.com/cs/ce/eudoc/
можна знайти в Інтернеті за такою адресою:
http://www.kenwood.com/cs/ce/eudoc/
iv
JS_KWD_KDC_BT510U_EN_C_2.indd ivJS_KWD_KDC_BT510U_EN_C_2.indd iv 01-Sep-16 11:22:15 AM01-Sep-16 11:22:15 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CONTENTS
BEFORE USE
BEFORE USE 2
IMPORTANT
•
To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe
BASICS 3
Warning and Caution in this manual.
GETTING STARTED 3
•
Please keep the manual in a safe and accessible place for future reference.
1 Select the display language
and cancel the demonstration
WARNING
2 Set the clock and date
•
Do not operate any function that takes your attention away from safe driving.
3 Set the initial settings
Caution
RADIO 5
Volume setting:
CD/USB/iPod/ANDROID 7
•
Adjust the volume so that you can hear sounds outside the car to prevent accidents.
•
Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.
AUX 9
General:
•
Avoid using the external device if it might hinder safe driving.
BLUETOOTH® 10
•
Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
AUDIO SETTINGS 16
•
Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.
•
If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.
DISPLAY SETTINGS 19
•
USB rating is indicated on the main unit. To view, detach the faceplate.
( 3)
•
Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected
TROUBLESHOOTING 20
( 27)
. Turn off the unit or change the source to STANDBY when parking at a low ceiling area.
REFERENCES 22
Maintenance
How to read this manual
More information
•
Operations are explained mainly using buttons on the faceplate.
•
English indications are used for the purpose of explanation. You can select the display language from the
[FUNCTION]
menu.
( 5)
SPECIFICATIONS 24
•
[XX]
indicates the selected items.
INSTALLATION/
•
( XX)
indicates references are available on the stated page.
CONNECTION 26
2
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 2JS_KWD_KDC_BT510U_EN_EN_5.indd 2 01-Sep-16 11:23:09 AM01-Sep-16 11:23:09 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
BASICS
GETTING STARTED
Faceplate
Volume knob
Loading slot Display window
1
Select the display language and cancel the
demonstration
When you turn on the power for the first time (or
[FACTORY RESET]
is set to
[YES]
,
5
), the display shows:
Detach button
“SEL LANGUAGE”
“PRESS” “VOLUME KNOB”
1 Turn the volume knob to select
[ENG]
(English),
[RUS]
(Russian) or
[SPA]
(Spanish), then press the knob.
How to resetAttach Detach
[ENG]
is selected for the initial setup.
Then, the display shows: “CANCEL DEMO”
“PRESS”
“VOLUME KNOB”.
2 Press the volume knob.
[YES]
is selected for the initial setup.
3 Press the volume knob again.
“DEMO OFF” appears.
To On the faceplate
Then, the display shows the selected crossover type:
Turn on the power
Press
.
“2-WAY X ’ OVER” or “3-WAY X ’ OVER”
• Press and hold to turn off the power.
• To change the crossover type, see “Change the crossover
type”. (
5
)
Adjust the volume Turn the volume knob.
Select a source
Press
repeatedly.
Change the display information Press DISP repeatedly.
( 24)
ENGLISH
3
JS_KWD_KDC_BT510U_EN_EN_5.indd 3JS_KWD_KDC_BT510U_EN_EN_5.indd 3 01-Sep-16 11:23:10 AM01-Sep-16 11:23:10 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
GETTING STARTED
Default:
XX
2
Set the clock and date
AUDIO CONTROL
1
Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select
[CLOCK]
, then press the knob.
SWITCH
(Not applicable if 3-way crossover is selected.)
PREOUT
REAR
/
SUB-W
: Selects whether rear speakers or a subwoofer are
To adjust the clock
connected to the line out terminals on the rear (through an external
3 Turn the volume knob to select
[CLOCK ADJUST]
, then press the knob.
amplifier).
( 27)
4 Turn the volume knob to make the settings, then press the knob.
Hour
Minute
TUNER SETTING
5 Turn the volume knob to select
[CLOCK FORMAT]
, then press the knob.
PRESET TYPE
NORMAL
:Memorizes one station for each preset button in each band
6 Turn the volume knob to select
[12H]
or
[24H]
, then press the knob.
(FM1/FM2/FM3/MW/LW).;
MIX
:Memorizes one station for each preset
To set the date
button, regardless of the selected band.
7 Turn the volume knob to select
[DATE FORMAT]
, then press the knob.
SYSTEM
8 Turn the volume knob to select
[DD/MM/YY]
or
[MM/DD/YY]
, then press
the knob.
KEY BEEP
(Not applicable if 3-way crossover is selected.)
9 Turn the volume knob to select
[DATE SET]
, then press the knob.
ON
:Activates the keypress tone.;
OFF
:Deactivates.
10 Turn the volume knob to make the settings, then press the knob.
SOURCE SELECT
Day
Month Year or Month Day Year
11 Press and hold to exit.
BUILT-IN AUX
ON
:Enables AUX in source selection.;
OFF
:Disables.
( 9)
To return to the previous setting item, press .
P-OFF WAIT
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
3
standby mode) to save the battery.
Set the initial settings
20M
: 20minutes;
40M
: 40minutes;
60M
: 60minutes;
– – –
:Cancels
1
Press repeatedly to enter STANDBY.
CD READ 1
:Automatically distinguishes between audio file disc and music CD.;
2 Press the volume knob to enter
[FUNCTION]
.
2
:Forces to play as a music CD. No sound can be heard if an audio file disc
3 Turn the volume knob to select an item (see the following table),
is played.
then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
F/W UPDATE
5 Press and hold to exit.
UPDATE SYSTEM
To return to the previous setting item, press .
F/W UP xxxx
YES
:Starts upgrading the firmware.;
NO
:Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
4
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 4JS_KWD_KDC_BT510U_EN_EN_5.indd 4 01-Sep-16 11:23:12 AM01-Sep-16 11:23:12 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
RADIO
FACTORY RESET YES
:Resets the settings to default (except the stored
station).;
NO
:Cancels
CLOCK
CLOCK DISPLAY
ON
:The clock time is shown on the display even when the unit
is turned off.;
OFF
:Cancels.
ENGLISH
Select the display language for
[FUNCTION]
menu and music
РУССКИЙ
information if applicable.
By default,
[ENGLISH]
is selected.
ESPANOL
Search for a station
1
Press repeatedly to select TUNER.
2 Press repeatedly to select FM1/FM2/FM3/MW/LW.
Change the crossover type
3 Press S/T to search for a station.
1
Press repeatedly to enter STANDBY.
• To change the searching method for S/T: Press repeatedly.
2 Press and hold number buttons 4 and 5 to enter crossover
AUTO1 : Automatically search for a station.
select.
AUTO2 : Search for a preset station.
The current crossover type appears.
MANUAL : Manually search for a station.
3 Turn the volume knob to select “2WAY” or “3WAY”, then
• To store a station: Press and hold one of the number buttons (1to6).
press the knob.
• To select a stored station: Press one of the number buttons (1to6).
4 Turn the volume knob to select “YES” or “NO”, then press
the knob.
The selected crossover type appears.
Other settings
• To cancel, press and hold
.
1
Press the volume knob to enter
[FUNCTION]
.
• To adjust the selected crossover settings,
( 17, 18)
.
2 Turn the volume knob to select an item
( 6)
, then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
Caution
instructions stated on the selected item.
Select a crossover type according to how the speakers are
4 Press and hold to exit.
connected.
( 27)
To return to the previous setting item, press .
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
ENGLISH
5
JS_KWD_KDC_BT510U_EN_EN_5.indd 5JS_KWD_KDC_BT510U_EN_EN_5.indd 5 01-Sep-16 11:23:13 AM01-Sep-16 11:23:13 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
RADIO
Default:
XX
Available Program Type for
[PTY SEARCH]
TUNER SETTING
SPEECH
:
NEWS
,
AFFAIRS
,
INFO
(information),
SPORT
,
EDUCATE
,
DRAMA
,
CULTURE
,
SCIENCE
,
VARIED
,
WEATHER
,
FINANCE
,
CHILDREN
,
SOCIAL
,
LOCAL SEEK
ON
: Searches only stations with good reception. ;
OFF
: Cancels.
RELIGION
,
PHONE IN
,
TRAVEL
,
LEISURE
,
DOCUMENT
•
Settings made are applicable only to the selected source/station. Once
MUSIC
:
POP M
(music),
ROCK M
(music),
EASY M
(music),
LIGHT M
(music),
you change the source/station, you need to make the settings again.
CLASSICS
,
OTHER M
(music),
JAZZ
,
COUNTRY
,
NATION M
(music),
AUTO
YES
:Automatically starts memorizing 6 stations with good reception.;
OLDIES
,
FOLK M
(music)
MEMORY
NO
:Cancels.
The unit will search for the Program Type categorized under
[SPEECH]
or
•
Selectable only if
[NORMAL]
is selected for
[PRESET TYPE]
.
( 4)
[MUSIC]
if selected.
MONO SET
ON
:Improves the FM reception, but the stereo effect may be lost.;
OFF
:Cancels.
•
[LOCAL SEEK]
/
[MONO SET]
/
[NEWS SET]
/
[REGIONAL]
/
[AF SET]
/
[TI]
/
[PTY SEARCH]
is
selectable only when the band is FM1/FM2/FM3.
NEWS SET ON
: The unit will temporarily switch to News Programme if available. ;
• If the volume is adjusted during reception of traffic information or news
OFF
:Cancels.
bulletin, the adjusted volume is memorized automatically. It will be
REGIONAL ON
: Switches to another station only in the specific region using the “AF”
applied the next time traffic information or news bulletin is turned on.
control.;
OFF
:Cancels.
AF SET ON
: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor.;
OFF
:Cancels.
TI ON
:Allows the unit to temporarily switch to Traffic Information if available
(“TI” lights up).;
OFF
:Cancels.
PTY SEARCH
1
Turn the volume knob to select the available Program Type, then press
the knob.
2
Turn the volume knob to select the PTY language (
ENGLISH
/
FRENCH
/
GERMAN
), then press the knob.
3
Press
S
/
T
to start searching.
CLOCK
TIME SYNC
ON
:Synchronizes the unit’s time to the Radio Data System station time.;
OFF
:Cancels.
6
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 6JS_KWD_KDC_BT510U_EN_EN_5.indd 6 01-Sep-16 11:23:14 AM01-Sep-16 11:23:14 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CD/USB/iPod/ANDROID
Start playback
The source changes automatically and
playback starts.
CD
M
Eject disc
Label side
To On the faceplate
Playback/pause Press .
Reverse/Fast-forward
*
4
Press and hold S/T.
USB input terminal
Select a track/file
Press S/T.
USB
Select a folder
*
5
Press J/K.
Repeat play
*
6
Press repeatedly.
CA-U1EX (max.: 500mA)
TRACK REPEAT
/
ALL REPEAT
: Audio CD
(optional accessory)
FILE REPEAT
/
FOLDER REPEAT
/
ALL REPEAT
: MP3/WMA/AAC/WAV/FLAC file
FILE REPEAT
/
FOLDER REPEAT
/
REPEAT OFF
: iPod or ANDROID
iPod/iPhone
Random play
*
6
Press repeatedly.
KCA-iP102/KCA-iP103 (optional
DISC RANDOM
/
RANDOM OFF
: Audio CD
accessory)
*
1
or accessory of the
FOLDER RANDOM
/
RANDOM OFF
: MP3/WMA/AAC/WAV/FLAC file, iPod or
iPod/iPhone
*
2
ANDROID
Press and hold
to select
ALL RANDOM
.
*
7
ANDROID
*
3
*
3
When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions
to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device
before connecting. For more information, visit <www.kenwood.com/cs/ce/>.
*
4
For ANDROID: Applicable only when
[BROWSE MODE]
is selected.
( 8)
Micro USB 2.0 cable
*
2
*
5
For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID.
(commercially available)
*
6
For iPod/ANDROID: Applicable only when
[MODE OFF]
/
[BROWSE MODE]
is selected.
( 8)
*
7
For CD: Only for MP3/WMA/AAC files.
*
1
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
*
2
Do not leave the cable inside the car when not using.
ENGLISH
7
JS_KWD_KDC_BT510U_EN_EN_5.indd 7JS_KWD_KDC_BT510U_EN_EN_5.indd 7 01-Sep-16 11:23:14 AM01-Sep-16 11:23:14 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
CD/USB/iPod/ANDROID
1 Press .
Select control mode
2 Turn the volume knob to select a folder/list, then press the knob.
While in iPod USB source, press 5 repeatedly.
3 Turn the volume knob to select a file, then press the knob.
MODE ON
: Control iPod using the iPod itself. However, you can still play/
pause, file skip, fast-forward or reverse from this unit.
Quick Search
(applicable only for CD, USB and ANDROID source)
MODE OFF
: Control iPod from this unit.
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.
While in ANDROID source, press 5 repeatedly.
BROWSE MODE
: Control Android device from this unit via KENWOOD
Skip Search
(applicable only for iPod USB and ANDROID source)
MUSIC PLAY application installed in the Android device.
Press S/T to search at a preset skip search ratio.
HAND MODE
: Control Android device using the Android device itself via
( 9, [SKIP SEARCH])
other media player applications installed in the Android
• Pressing and holding S/T searches at a 10
%
ratio.
device. However, you can still play/pause and file skip from
Alphabet search
(applicable only for iPod USB and ANDROID source)
this unit.
You can search for a file according to the first character.
For iPod USB source
Select music drive
1 Turn the volume knob quickly to enter character search.
2 Turn the volume knob to select the character.
While in USB source, press 5 repeatedly.
• Select “
Stored songs in the following drive will be played back.
*
” to search for a character other than AtoZ, 0to9.
3 Press S/T to move to the entry position.
• Selected internal or external memory of a smartphone (Mass Storage
• You can enter up to 3characters.
Class).
4 Press the volume knob to start searching.
• Selected drive of a multiple drives device.
For ANDROID source
1 Press J/K to enter character search.
Listen to TuneIn Radio/TuneIn Radio Pro/Aupeo
2 Turn the volume knob to select the character.
^A^: Upper case letters (A to Z)
While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the
_A_: Lower case letters (a to z)
iPod/iPhone to the USB input terminal of the unit.
-0-: Numbers (0 to 9)
• The unit will output the sound from these applications.
***
: Character other than AtoZ, 0to9
3 Press the volume knob to start searching.
Select a file from a folder/list
• To return to the root folder/first file/top menu, press 5.
(Not applicable for
For iPod/ANDROID, applicable only when
[MODE OFF]
/
[BROWSE MODE]
is
BT AUDIO source.)
selected.
• To return to the previous setting item, press .
• To cancel, press and hold
.
8
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 8JS_KWD_KDC_BT510U_EN_EN_5.indd 8 01-Sep-16 11:23:15 AM01-Sep-16 11:23:15 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CD/USB/iPod/ANDROID
AUX
Preparation:
Settings to use KENWOOD Remote application
Select
[ON]
for
[BUILT-IN AUX]
for
[SOURCE SELECT]
.
( 4)
KENWOOD Remote application is designed to control the KENWOOD car
receiver’s operations from the iPhone/iPod (via USB input terminal).
Start listening
Preparation:
1
Connect a portable audio player (commercially available).
Install the latest version of KENWOOD Remote application on your device
Auxiliary input jack
before connecting. For more information, visit
Portable audio
<www.kenwood.com/cs/ce/>.
player
You can make the settings in the same way as connection via Bluetooth.
( 15)
Other settings
3.5mm stereo mini plug with “L” shaped connector
1
Press the volume knob to enter
[FUNCTION]
.
(commercially available)
2 Turn the volume knob to select an item (see the following table),
then press the knob.
2 Press repeatedly to select AUX.
3 Repeat step 2 until the desired item is selected or activated.
3 Turn on the portable audio player and start playback.
4 Press and hold to exit.
To return to the previous setting item, press .
Set the AUX name
Default:
XX
While listening to a portable audio player connected to the unit...
1 Press the volume knob to enter
[FUNCTION]
.
USB
2 Turn the volume knob to select
[SYSTEM]
, then press the knob.
MUSIC DRIVE DRIVE CHANGE
:The next drive (
[DRIVE 1]
to
[DRIVE 4]
) is selected
3 Turn the volume knob to select
[AUX NAME SET]
, then press the knob.
automatically and playback starts.
4 Turn the volume knob to select an item, then press the knob.
Repeat steps
1
to
3
to select the following drives.
AUX
(default)/
DVD
/
PORTABLE
/
GAME
/
VIDEO
/
TV
5 Press and hold to exit.
SKIP SEARCH 0.5%
/
1%
/
5%
/
10%
: While listening to iPod USB or ANDROID source, selects
the skip search ratio over the total files.
To return to the previous setting item, press .
ENGLISH
9
JS_KWD_KDC_BT510U_EN_EN_5.indd 9JS_KWD_KDC_BT510U_EN_EN_5.indd 9 01-Sep-16 11:23:15 AM01-Sep-16 11:23:15 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
BLUETOOTH®
BLUETOOTH — Connection
Pair and connect a Bluetooth device for the first time
Supported Bluetooth profiles
1
Press to turn on the unit.
– Hands-Free Profile (HFP)
2 Search and select this unit model name (KDC-BT5**U) on the Bluetooth device.
– Advanced Audio Distribution Profile (A2DP)
“PAIRING”
“PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” appears on the
– Audio/Video Remote Control Profile (AVRCP)
display.
– Serial Port Profile (SPP)
• For some Bluetooth devices, you may need to enter the Personal Identification Number
– Phonebook Access Profile (PBAP)
(PIN) code immediately after searching.
Supported Bluetooth codecs
3 Press the volume knob to start pairing.
– Sub Band Codec (SBC)
“PAIRING OK” appears when pairing is completed.
– Advanced Audio Coding (AAC)
Once pairing is completed, Bluetooth connection is established automatically. “BT1” and/or
“BT2” on the display window lights up.
Connect the microphone
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
Rear panel
• Once the pairing is completed, the Bluetooth device will remain registered in the unit even
if you reset the unit. To delete the paired device,
13, [DEVICE DELETE]
.
Microphone
• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at
(supplied)
any time.
Microphone input jack
However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and
switch between these five devices.
( 14)
• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect
the device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more information.
Auto Pairing
When you connect iPhone/iPod touch/Android device to the USB input terminal, pairing
Adjust the microphone
request (via Bluetooth) is automatically activated.
angle
Secure using cord clamps (not
Press the volume knob to pair once you have confirmed the device name.
supplied) if necessary.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
–
[AUTO PAIRING]
is set to
[ON]
.
( 14)
– KENWOOD MUSIC PLAY application is installed on the Android device
( 7)
and
[BROWSE MODE]
is selected.
( 8)
10
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 10JS_KWD_KDC_BT510U_EN_EN_5.indd 10 01-Sep-16 11:23:16 AM01-Sep-16 11:23:16 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
BLUETOOTH — Mobile phone
To On the faceplate
While talking on the first incoming call...
Answer another incoming
Press
.
call and hold the current
call
Reject another incoming
Press
.
call
While having two active calls...
Receive a call
End current call and
Press
.
When there is an incoming call:
activate held call
• The unit answers the call automatically if
[AUTO ANSWER]
is set to a
Swap between the
selected time.
( 12)
Press
.
current call and held call
During a call:
Adjust the phone volume
Turn the volume knob during a call.
• If you turn off the unit or detach the faceplate, the Bluetooth
[00]
to
[35]
(Default:
[15]
)
• This adjustment will not affect the
connection is disconnected.
volume of the other sources.
Switch between hands-free
Press
during a call.
The following operations may differ or not available depending on the
and private talk modes
• Operations may vary according to the
connected phone.
connected Bluetooth device.
To On the faceplate
Improve the voice quality
First incoming call...
While talking on the phone...
Answer a call
Press
or the volume knob or one of
1 Press the volume knob to enter
[FUNCTION]
.
the number buttons (1 to 6).
2 Turn the volume knob to select an item
( 12)
, then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
Reject a call
Press
.
4 Press and hold to exit.
End a call
Press .
To return to the previous setting item, press .
ENGLISH
11
JS_KWD_KDC_BT510U_EN_EN_5.indd 11JS_KWD_KDC_BT510U_EN_EN_5.indd 11 01-Sep-16 11:23:18 AM01-Sep-16 11:23:18 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Default:
XX
CALL HISTORY
(Applicable only if the phone supports PBAP.)
MIC GAIN –10
to
+10
(
–4
):The sensitivity of the microphone increases as the
1
Press the volume knob to select a name or a phone number.
number increased.
• “I” indicates call received, “O” indicates call made, “M” indicates call
missed.
NR LEVEL –5
to
+5
(
0
):Adjust the noise reduction level until the least noise is
• Press
DISP
to change the display category (NUMBER or NAME).
being heard during a phone conversation.
• “NO DATA” appears if there is no recorded call history.
ECHO CANCEL –5
to
+5
(
0
):Adjust the echo cancellation delay time until the least
2
Press the volume knob to call.
echo is being heard during a phone conversation.
PHONE BOOK
(Applicable only if the phone supports PBAP.)
1
Turn the volume knob quickly to enter alphabet search mode (if the
Answer incoming call automatically
phonebook contains many contacts).
1
Press to enter Bluetooth mode.
The first menu (ABCDEFGHIJK) appears.
2 Turn the volume knob to select
[SETTINGS]
, then press the knob.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
*
), press
J / K
.
3 Turn the volume knob to select
[AUTO ANSWER]
, then press the knob.
• To select the desired first letter, turn the volume knob or press
4 Turn the volume knob to select an item, then press the knob.
S/T
, then press the knob.
1
to
30
(in seconds)/
OFF
(default)
Select “1” to search with numbers and select “
*
” to search with
5 Press and hold to exit.
symbols.
2
Turn the volume knob to select a name, then press the knob.
To return to the previous setting item, press .
3
Turn the volume knob to select a phone number, then press the knob
to call.
Make a call
•
The phonebook of the connected phone is automatically transferred to
the unit when pairing.
You can make a call from the call history, phonebook, or dialing the
•
Contacts are categorized as: HM (home), OF (office), MO (mobile), OT
number. Call by voice is also possible if your mobile phone has the
(other), GE (general)
feature.
•
This unit can display only non-accent letters. (Accent letters such as “Ú”
1 Press to enter Bluetooth mode.
is shown as “U”.)
“(First device name)” appears.
• If two Bluetooth phones are connected, press again to switch to
NUMBER DIAL
1
Turn the volume knob to select a number (0 to 9) or character
another phone.
(
, #, +).
“(Second device name)” appears.
2
Press
S/T
to move the entry position.
2 Turn the volume knob to select an item (see the following table),
Repeat steps
1
and
2
until you finish entering the phone number.
then press the knob.
3
Press the volume knob to call.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
12
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 12JS_KWD_KDC_BT510U_EN_EN_5.indd 12 01-Sep-16 11:23:19 AM01-Sep-16 11:23:19 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
VOICE
Speak the name of the contact you want to call or the voice command
Make a call from memory
to control the phone functions.
( Make a call using voice
1
Press to enter Bluetooth mode.
recognition)
2 Press one of the number buttons (1 to 6).
3 Press the volume knob to call.
BATT LOW
/
MID
/
FULL
*
:Shows the strength of the battery.
“NO MEMORY” appears if there is no contacts stored.
NO SIGNAL
/
LOW
/
MID
/
MAX
*
:Shows the strength of the current received signal.
*
Functionality depends on the type of the phone used.
Other settings
1
Press the volume knob to enter
[FUNCTION]
.
Make a call using voice recognition
2 Turn the volume knob to select an item (see the following table),
1
Press and hold to activate the voice recognition of the
then press the knob.
connected phone.
3 Repeat step 2 until the desired item is selected/activated or follow
2 Speak the name of the contact you want to call or the voice
the instructions stated on the selected item.
command to control the phone functions.
4 Press and hold to exit.
• Supported Voice Recognition features vary for each phone. Refer to the
To return to the previous setting item, press .
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
Default:
XX
iPhone.
BT MODE
Settings in memory
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
“
*
” appears in front of the device name when connected.
Store a contact in memory
“
” appears in front of the current playback audio device.
AUDIO SELECT
You can store up to 6 contacts into the number buttons (1 to 6).
•
You can only connect a maximum of two Bluetooth phones and one
1 Press to enter Bluetooth mode.
Bluetooth audio device at any time.
2 Turn the volume knob to select
[CALL HISTORY]
,
[PHONE BOOK]
, or
DEVICE DELETE
1
Turn the volume knob to select a device to delete, then press the knob.
[NUMBER DIAL]
, then press the knob.
2
Turn the volume knob to select
[YES]
or
[NO]
, then press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
PIN CODE EDIT
Changes the PIN code (up to 6 digits).
If a contact is selected, press the volume knob to show the phone
(0000)
1
Turn the volume knob to select a number.
number.
2
Press
S
/
T
to move the entry position.
4 Press and hold one of the number buttons (1 to 6).
Repeat steps
1
and
2
until you finish entering the PIN code.
“STORED” appears when the contact is stored.
3
Press the volume knob to confirm.
To erase a contact from the preset memory, select
[NUMBER DIAL]
in step 2
and store a blank number.
ENGLISH
13
JS_KWD_KDC_BT510U_EN_EN_5.indd 13JS_KWD_KDC_BT510U_EN_EN_5.indd 13 01-Sep-16 11:23:19 AM01-Sep-16 11:23:19 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
BLUETOOTH®
BLUETOOTH — Audio
RECONNECT ON
:The unit automatically reconnect when the last connected
Bluetooth device is within range.;
OFF
:Cancels.
While in BT AUDIO
AUTO PAIRING ON
:The unit automatically pair supported Bluetooth device
source, you can
(iPhone/iPod touch/Android device) when it is connected
connect to five
through USB input terminal.Depending on the operating
Bluetooth audio
system of the connected device, this function may not work. ;
devices and switch
OFF
:Cancels.
between these five
devices.
INITIALIZE YES
:Initializes all the Bluetooth settings (including stored
pairing, phonebook, and etc.).;
NO
:Cancels.
Audio player via Bluetooth
1
Press repeatedly to select BTAUDIO.
2 Operate the Bluetooth audio player to start playback.
Bluetooth test mode
To On the faceplate
You can check the connectivity of the supported profile between
the Bluetooth device and the unit.
Playback/pause
Press
.
• Make sure there is no Bluetooth device paired.
Select group or folder
Press J / K.
1 Press and hold .
“PLEASE PAIR YOUR PHONE PIN 0000” appears.
Reverse/Forward skip
Press S/T.
2 Search and select this unit model name (KDC-BT5**U) on
Reverse/Fast-forward
Press and hold S/T.
the Bluetooth device.
3 Operate the Bluetooth device to confirm pairing.
Repeat play Press
repeatedly.
“TESTING” flashes on the display.
ALL REPEAT
,
FILE REPEAT
,
REPEAT OFF
Random play Press and hold to select
ALL RANDOM
.
The connectivity result (OK or NG) appears after the test.
• Press
to select
RANDOM OFF
.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
Select a file from a folder/list Refer to “Select a file from a folder/list” on
AUD CNT: Advanced Audio Distribution Profile (A2DP)
page 8.
compatibility
Switch between connected
Press 5.
*
PB DL: Phonebook Access profile (PBAP) compatibility
Bluetooth audio devices
To cancel test mode, press and hold
to turn off the unit.
*
Pressing the “Play” key on the connected device itself also causes switching of sound output from the
device.
Operations and display indications may differ according to their availability on the
connected device.
14
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 14JS_KWD_KDC_BT510U_EN_EN_5.indd 14 01-Sep-16 11:23:20 AM01-Sep-16 11:23:20 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Settings to use KENWOOD Remote application
STATUS
Shows the status of the selected device.
IOS CONNECTED
: You are able to use the application using the iPhone/iPod
KENWOOD Remote application is designed to control the KENWOOD
connected via Bluetooth or USB input terminal.
car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB
IOS NOT CONNECTED
: No IOS device is connected to use the application.
input terminal) or Android smartphone (via Bluetooth).
ANDROID CONNECTED
: You are able to use the application using the Android
Preparation: Install the latest version of KENWOOD Remote application on your device before
smartphone connected via Bluetooth.
connecting. For more information, visit <www.kenwood.com/cs/ce/>.
ANDROID NOT CONNECTED
: No Android device is connected to use the
1 Press the volume knob to enter
[FUNCTION]
.
application.
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
Listen to iPhone/iPod via Bluetooth
4 Press and hold to exit.
You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.
To return to the previous setting item, press .
Press repeatedly to select iPodBT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via
Default:
XX
USB input terminal.
( 7)
REMOTE APP
• If you plug in an iPhone/iPod to the USB input terminal while listening
to iPodBT source, the source automatically change to iPodUSB. Press
SELECT
Select the device (IOS or ANDROID) to use the application.
to select iPodBT if the device is still connected via Bluetooth.
IOS YES
:Selects iPhone/iPod to use the application via Bluetooth or connected via
USB input terminal.;
NO
:Cancels.
If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is
connected via USB input terminal) to activate the application.
•
The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the
USB input terminal.
– You change from iPod USB source to iPod BT source.
ANDROID YES
:Selects Android smartphone to use the application via Bluetooth.;
NO
: Cancels.
ANDROID LIST
*:Selects the Android smartphone to use from the list.
*
Displayed only when
[ANDROID]
of
[SELECT]
is set to
[YES]
.
ENGLISH
15
JS_KWD_KDC_BT510U_EN_EN_5.indd 15JS_KWD_KDC_BT510U_EN_EN_5.indd 15 01-Sep-16 11:23:21 AM01-Sep-16 11:23:21 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
FADER
(Not applicable if 3-way crossover is selected.)
1 Press the volume knob to enter
[FUNCTION]
.
R15
to
F15
(
0
):Adjusts the rear and front speaker output balance.
2 Turn the volume knob to select an item (see the following table),
BALANCE L15
to
R15
(
0
):Adjusts the left and right speaker output balance.
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
VOLUME OFFSET –15
to
+6
(
0
):Preset the initial volume level of each source. (Before
4 Press and hold to exit.
adjustment, select the source you want to adjust.)
To return to the previous setting item, press .
SOUND EFFECT
Default:
XX
SOUND RECNSTR
(Not applicable for TUNER source and AUX source.)
AUDIO CONTROL
(Sound
ON
:Creates realistic sound by compensating the high-frequency
reconstruction)
components and restoring the rise-time of the waveform that are lost
SUB-W LEVEL
LEVEL –50
to
LEVEL +10
(
LEVEL 0
): Adjusts the subwoofer output level.
in audio data compression.;
OFF
:Cancels.
MANUAL EQ
The sound elements (frequency level, tone level, Q factor) are preset into
SPACE ENHANCE
(Not applicable for TUNER source.)
each selection (
BAND1 LEVEL
to
BAND13 LEVEL
).
SML
/
MED
/
LRG
:Virtually enhances the sound space.;
OFF
:Cancels.
BAND1 LEVEL
SND REALIZER LV1
/
LV2
/
LV3
:Virtually makes the sound more realistic.;
LEVEL
LEVEL–9
to
LEVEL +9
(
LEVEL 0
):Adjusts the level to memorize for
OFF
:Cancels.
each source. (Before making an adjustment, select the source you want
STAGE EQ LOW
/
MID
/
HI
:Virtually adjust the sound position heard from the
to adjust.)
speakers.;
OFF
:Cancels.
BASS EXTEND ON
:Turns on the extended bass.;
OFF
:Cancels.
DRIVE EQ ON
: Boosts the frequency to reduce the noise heard from outside the
BAND2 LEVEL
to
LEVEL–9
to
LEVEL +9
(
LEVEL 0
):Adjusts the level to memorize for
car or running noise of the tyres.;
OFF
:Cancels.
BAND13 LEVEL
each source. (Before making an adjustment, select the source you want
SPEAKER SIZE
Depending on the crossover type you have selected
( 5)
, 2-way
to adjust.)
crossover or 3-way crossover setting items will be shown.
( 17,18)
Q FACTOR 1.35
/
1.50
/
2.00
:Adjust the quality factor.
X’OVER
By default, 2-way crossover type is selected.
PRESET EQ NATURAL
/
ROCK
/
POPS
/
EASY
/
TOP40
/
JAZZ
/
POWERFUL
/
USER
: Selects
DTA SETTINGS
a preset equalizer suitable to the music genre. (Select
[USER]
to use the
For settings,
18, 19, Digital Time Alignment settings
.
CAR SETTINGS
settings made in
[MANUAL EQ]
.)
BASS BOOST LV1
/
LV2
/
LV3
/
LV4
/
LV5
:Selects your preferred bass boost level.;
• For 2-way crossover:
[SUB-W LEVEL]
/
[SUBWOOFER SET]
is selectable only if
OFF
:Cancels.
[SWITCH PREOUT]
is set to
[SUB-W]
.
( 4)
•
[SUB-W LEVEL]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
LOUDNESS LV1
/
LV2
:Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level.;
OFF
:Cancels.
SUBWOOFER SET ON
:Turns on the subwoofer output.;
OFF
:Cancels.
16
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 16JS_KWD_KDC_BT510U_EN_EN_5.indd 16 01-Sep-16 11:23:22 AM01-Sep-16 11:23:22 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
Crossover settings
2-way crossover setting items
Below are the available setting items for 2-way crossover
SPEAKER SIZE
and 3-way crossover.
FRONT SIZE
8CM
/
10CM
/
12CM
/
13CM
/
16CM
/
17CM
/
18CM
/
4×6
/
5×7
/
6×8
/
6×9
/
7×10
SPEAKER SIZE
Selects according to the connected speaker size for
TWEETER
SMALL
/
MIDDLE
/
LARGE
/
NONE
(not connected)
optimum performance.
REAR 8CM
/
10CM
/
12CM
/
13CM
/
16CM
/
17CM
/
18CM
/
4×6
/
5×7
/
6×8
/
6×9
/
7×10
/
NONE
•
The frequency and slope settings are automatically set
(not connected)
for the crossover of the selected speaker.
1
•
When 2-way crossover is selected, if
[NONE]
is selected
SUBWOOFER
*
16CM
/
20CM
/
25CM
/
30CM
/
38CM OVER
/
NONE
(not connected)
for
[TWEETER]
of
[FRONT]
,
[REAR]
and
[SUBWOOFER]
for
X ' OVER
[SPEAKER SIZE]
, the
[X ‘ OVER]
setting of the speaker is not
available.
TWEETER FRQ
1KHZ
/
1.6KHZ
/
2.5KHZ
/
4KHZ
/
5KHZ
/
6.3KHZ
/
8KHZ
/
10KHZ
/
12.5KHZ
• When 3-way crossover is selected, if
[NONE]
is selected
GAIN LEFT
–8
to
0
for
[WOOFER]
of
[SPEAKER SIZE]
, the
[X’OVER]
setting of
GAIN RIGHT
–8
to
0
[WOOFER]
is not available.
FRONT HPF F - HPF FRQ
30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
X ‘ OVER
180HZ
/
220HZ
/
250HZ/THROUGH
• [FRQ]
/
[F - HPF FRQ]
/
[R - HPF FRQ]
/
[SW LPF FRQ]
/
[HPF FRQ]
/
F - HPF SLOPE
–6DB
/
–12DB
/
–18DB
/
–24DB
[LPF FRQ]
: Adjusts the crossover frequency for the
selected speakers (high pass filter or low pass filter).
F - HPF GAIN
–8
to
0
If
[THROUGH]
is selected, all signals are sent to the
REAR HPF R - HPF FRQ
selected speakers.
•
[F - HPF SLOPE]
/
[R - HPF SLOPE]
/
[SW LPF SLOPE]
/
[HPF SLOPE]
/
R - HPF SLOPE
(Refer
FRONT HPF
settings above.)
[LPF SLOPE]
/
[SLOPE]:
Adjusts the crossover slope.
R - HPF GAIN
Selectable only if a setting other than
[THROUGH]
is
SUBWOOFER
SW LPF FRQ 30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
selected for the crossover frequency.
LPF
*
1
180HZ
/
220HZ
/
250HZ
/
THROUGH
• [SW LPF PHASE]
/
[PHASE]:
Selects the phase of the speaker
output to be in line with the other speaker output.
SW LPF SLOPE
–6DB
/
–12DB
/
–18DB
/
–24DB
• [GAIN LEFT]
/
[GAIN RIGHT]
/
[F - HPF GAIN]
/
[R - HPF GAIN]
/
SW LPF PHASE
REVERSE
(180°)/
NORMAL
(0°)
[SW LPF GAIN]
/
[GAIN]
:
Adjusts the output volume of the
SW LPF GAIN –8
to
0
selected speaker.
*
1
Selectable only when
[SWITCH PREOUT]
is set to
[SUB-W]
( 4)
and
[SUBWOOFER SET]
is set to
[ON]
.
( 16)
ENGLISH
17
JS_KWD_KDC_BT510U_EN_EN_5.indd 17JS_KWD_KDC_BT510U_EN_EN_5.indd 17 01-Sep-16 11:23:23 AM01-Sep-16 11:23:23 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
3-way crossover setting items
Digital Time Alignment settings
SPEAKER SIZE
Digital Time Alignment sets the delay time of the speaker output to
create a more suitable environment for your vehicle.
TWEETER
SMALL
/
MIDDLE
/
LARGE
• For more information,
19, Determining the value for [DISTANCE] and [GAIN]
MID RANGE
8CM
/
10CM
/
12CM
/
13CM
/
16CM
/
17CM
/
18CM
/
4×6
/
5×7
/
6×8
/
6×9
of [DTA SETTINGS].
WOOFER
*
2
16CM
/
20CM
/
25CM
/
30CM
/
38CM OVER
/
NONE
(not connected)
X ' OVER
DTA SETTINGS
TWEETER HPF FRQ
1KHZ
/
1.6KHZ
/
2.5KHZ
/
4KHZ
/
5KHZ
/
6.3KHZ
/
8KHZ
/
POSITION
Selects your listening position (reference point).
10KHZ
/
12.5KHZ
ALL
:Not compensating;
FRONT RIGHT:
Front right seat;
FRONT LEFT
:Front left seat;
FRONT ALL
:Front seat
SLOPE
–6DB
/
–12DB
•
[FRONT ALL]
is displayed only when
[2-WAY X’OVER]
is selected.
PHASE
REVERSE
(180°)/
NORMAL
(0°)
( 5)
GAIN –8
to
0
DISTANCE 0CM
to
610CM
:Fine adjust the distance to compensate. (Before
making an adjustment, select the speaker you want to adjust.)
MID RANGE HPF FRQ
30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
180HZ
/
220HZ
/
250HZ
/
THROUGH
GAIN –8DB
to
0DB
:Fine adjust the output volume of the selected speaker.
HPF SLOPE
–6DB
/
–12DB
(Before making an adjustment, select the speaker you want to adjust.)
LPF FRQ
1KHZ
/
1.6KHZ
/
2.5KHZ
/
4KHZ
/
5KHZ
/
6.3KHZ
/
8KHZ
/
DTA RESET YES
:Resets the settings (
[DISTANCE]
and
[GAIN]
) of the selected
10KHZ
/
12.5KHZ
/
THROUGH
[POSITION]
to default.;
NO
:Cancels.
LPF SLOPE
–6DB
/
–12DB
CAR SETTINGS
Identify your car type and rear speaker location in order to make the
adjustment for
[DTA SETTINGS]
.
PHASE
REVERSE
(180°)/
NORMAL
(0°)
CAR TYPE COMPACT
/
FULL SIZE CAR
/
WAGON
/
MINIVAN
/
SUV
/
GAIN –8
to
0
MINIVAN(LONG)
:Selects the type of vehicle.;
OFF:
Not
WOOFER
*
2
LPF FRQ 30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
compensating.
120HZ
/
150HZ
/
180HZ
/
220HZ
/
250HZ
/
THROUGH
R-SP LOCATION
Selects the location of the rear speakers in your vehicle to calculate the
SLOPE
–6DB
/
–12DB
furthest distance from the listening position selected (reference point).
PHASE
REVERSE
(180°)/
NORMAL
(0°)
•
DOOR
/
REAR DECK
:Selectable only when
[CAR TYPE]
is selected as
[OFF]
,
[COMPACT]
,
[FULL SIZE CAR]
,
[WAGON]
or
[SUV]
.
GAIN –8
to
0
•
2ND ROW
/
3RD ROW
:Selectable only when
[CAR TYPE]
is selected
*
2
Selectable only when
[SUBWOOFER SET]
is set to
[ON]
.
( 16)
as
[MINIVAN]
or
[MINIVAN(LONG)]
.
18
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 18JS_KWD_KDC_BT510U_EN_EN_5.indd 18 01-Sep-16 11:23:23 AM01-Sep-16 11:23:23 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
DISPLAY SETTINGS
•
Before making an adjustment for
[DISTANCE]
and
[GAIN]
of
[DTA SETTINGS]
, select the speaker you
want to adjust:
When 2-way crossover is selected:
FRONT LEFT
/
FRONT RIGHT
/
REAR LEFT
/
REAR RIGHT
/
SUBWOOFER
– You can only select
[REAR LEFT]
,
[REAR RIGHT]
and
[SUBWOOFER]
if a setting other than
[NONE]
is
selected for
[REAR]
and
[SUBWOOFER]
of
[SPEAKER SIZE]
.
( 17)
When 3-way crossover is selected:
TWEETER LEFT
/
TWEETER RIGHT
/
MID LEFT
/
MID RIGHT
/
WOOFER
– You can only select
[WOOFER]
if a setting other than
[NONE]
is selected for
[WOOFER]
of
[SPEAKER SIZE]
.
( 18)
Set the dimmer
•
[R-SP LOCATION]
of
[CAR SETTINGS]
is selectable only if:
Press and hold DISP (DIMMER) to turn on or off the
– 2-way crossover is selected.
( 5)
dimmer.
– A setting other than
[NONE]
is selected for
[REAR]
of
[SPEAKER SIZE]
.
( 17)
• If you have set
[DIMMER TIME]
, it will be canceled once you
press and hold this button.
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
If you specify the distance from the center of the currently
Other settings
set listening position to every speaker, the delay time will be
automatically computed and set.
1
Press the volume knob to enter
[FUNCTION]
.
1
Determine the center of the currently set listening position
2 Turn the volume knob to select an item
( 20)
, then press
as the reference point.
the knob.
2
Measure the distances from the reference point to the
3 Repeat step 2 until the desired item is selected/activated
speakers.
or follow the instructions stated on the selected item.
3
Calculate the differences between the distance of the
4 Press and hold to exit.
furthest speaker (rear speaker) and other speakers.
To return to the previous setting item, press .
4
Set the
[DISTANCE]
calculated in step
3
for individual
speakers.
5
Adjust
[GAIN]
for individual speakers.
Example: When
[FRONT ALL]
is selected as the listening
position
ENGLISH
19
JS_KWD_KDC_BT510U_EN_EN_5.indd 19JS_KWD_KDC_BT510U_EN_EN_5.indd 19 01-Sep-16 11:23:24 AM01-Sep-16 11:23:24 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
DISPLAY SETTINGS
TROUBLESHOOTING
Default:
XX
Symptom Remedy
DISPLAY
Sound cannot be heard.
•
Adjust the volume to the optimum level.
DIMMER
Dim the illumination.
•
Check the cords and connections.
ON
:Dimmer is turned on.;
OFF
:Cancels.
“MISWIRING CHECK WIRING
Turn the power off, then check to be sure the
DIMMER TIME
:Set the dimmer on and off time.
THEN PWR ON” appears.
terminals of the speaker wires are insulated properly.
1
Turn the volume knob to adjust the
[ON]
time, then press the knob.
Turn the power on again.
2
Turn the volume knob to adjust the
[OFF]
time, then press the knob.
(Default:
[ON]
:
18:00
;
[OFF]
:
6:00
)
“PROTECTING SEND SERVICE”
Send the unit to the nearest service center.
General
appears.
BRIGHTNESS
1
Select a zone. (See the illustration on page 19.)
2
0
to
31
: Select your preferred brightness level for the selected zone.
•
Sound cannot be heard.
Clean the connectors.
( 22)
•
The unit does not turn on.
TEXT SCROLL AUTO
/
ONCE
:Select whether to scroll the display information automatically,
•
Information shown on the
or scroll only once.;
OFF
:Cancels.
display is incorrect.
The unit does not work at all. Reset the unit.
( 3)
•
Radio reception is poor.
Connect the antenna firmly.
•
Static noise while listening
Radio
to the radio.
Disc cannot be ejected.
Press and hold
M
to forcibly eject the disc. Be careful
not to drop the disc when it is ejected. If this does not
solve the problem, reset the unit.
( 3)
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as you
Playback order is determined when files are recorded.
intended them to play.
“READING” keeps flashing. Do not use too many hierarchical levels or folders.
CD/USB /iPod
Elapsed playing time is not
This is caused by how the tracks are recorded.
correct.
“LOADING” appears when you
This unit is still preparing the iPod/iPhone music list.
enter search mode by pressing
It may take some time to load, try again later.
.
20
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 20JS_KWD_KDC_BT510U_EN_EN_5.indd 20 01-Sep-16 11:23:25 AM01-Sep-16 11:23:25 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom Remedy
Symptom Remedy
Correct characters are not
•
This unit can only display uppercase letters, numbers,
•
Sound cannot
•
Reconnect the Android device.
displayed (e.g. album
and a limited number of symbols.
be heard during
•
If in
[HAND MODE]
, launch any media player application
name).
•
Depending on the display language you have selected
playback.
on the Android device and start playback.
( 5)
, some characters may not be displayed correctly.
•
Sound output only
•
If in
[HAND MODE]
, relaunch the current media player
from the Android
application or use another media player application.
“NA FILE” Make sure the disc contains supported audio files.
( 23)
device.
•
Restart the Android device.
“NO DISC” Insert a playable disc into the loading slot.
•
If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit.
( 23)
“TOC ERROR” Make sure the disc is clean and inserted properly.
Cannot playback at
•
Make sure KENWOOD MUSIC PLAY APP is installed on the
“PLEASE EJECT” Reset the unit. If this does not solve the problem, consult
[BROWSE MODE]
.
Android device.
( 7)
your nearest service center.
•
Reconnect the Android device and select the appropriate
“READ ERROR” Copy the files and folders onto the USB device again. If this
control mode.
does not solve the problem, reset the USB device or use
ANDROID
•
If this does not solve the problem, the connected Android
another USB device.
device does not support
[BROWSE MODE]
.
( 23)
“NO DEVICE” Connect a USB device, and change the source to USB again.
“NO DEVICE” or
•
Switch off the developer options on the Android device.
“READING” keeps
•
Reconnect the Android device.
CD/USB /iPod
“COPY PRO” A copy-protected file is played.
flashing.
•
If this does not solve the problem, the connected Android
“UNSUPPORTED DEVICE”
•
Check whether the connected device is compatible with
device does not support
[BROWSE MODE]
.
( 23)
appears.
this unit and ensure the file systems are in supported
Playback is intermittent
Turn off the power saving mode on the Android device.
formats.
( 23)
or sound skips.
•
Reattach the device.
“ANDROID ERROR”/
•
Reconnect the Android device.
“UNRESPONSIVE DEVICE”
Make sure the device is not malfunction and reattach the
“NADEVICE”
•
Restart the Android device.
appears.
device.
No Bluetooth device is
•
Search from the Bluetooth device again.
“USB HUB IS NOT
This unit cannot support a USB device connected via a
detected.
•
Reset the unit.
( 3)
SUPPORTED” appears.
USB hub.
Bluetooth pairing
•
Make sure you have entered the same PIN code to both
“NO MUSIC” Connect a USB device that contains playable audio files.
cannot be made.
the unit and Bluetooth device.
“iPod ERROR”
•
Reconnect the iPod.
Bluetooth®
•
Delete pairing information from both the unit and the
•
Reset the iPod.
Bluetooth device, then perform pairing again.
( 10)
ENGLISH
21
JS_KWD_KDC_BT510U_EN_EN_5.indd 21JS_KWD_KDC_BT510U_EN_EN_5.indd 21 01-Sep-16 11:23:26 AM01-Sep-16 11:23:26 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
REFERENCES
Symptom Remedy
Maintenance
Cleaning the unit
Echo or noise is heard
•
Adjust the microphone unit’s position.
( 10)
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
during a phone
•
Check the
[ECHO CANCEL]
setting.
( 12)
conversation.
Cleaning the connector
Phone sound quality
•
Reduce the distance between the unit and the Bluetooth device.
Detach the faceplate and clean the
is poor.
•
Move the car to a place where you can get a better signal reception.
connector gently with a cotton swab,
being careful not to damage the
Voice calling method is
•
Use voice calling method in a more quiet environment.
connector.
not successful.
•
Reduce the distance from the microphone when you speak the
Connector (on the reverse
name.
side of the faceplate)
•
Make sure the same voice as the registered voice tag is used.
Handling discs
Sound is being
•
Reduce the distance between the unit and the Bluetooth audio
•
Do not touch the recording surface of the disc.
interrupted or skipped
player.
•
Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
during playback of a
•
Turn off, then turn on the unit and try to connect again.
•
Do not use any accessories for the disc.
Bluetooth audio player.
•
Other Bluetooth devices might be trying to connect to the unit.
•
Clean from the center of the disc and move outward.
•
Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
The connected Bluetooth
•
Check whether the connected Bluetooth audio player supports
•
When removing discs from this unit, pull them out horizontally.
audio player cannot be
Audio/Video Remote Control Profile (AVRCP). (Refer to the
•
Remove burrs from the center hole and disc edge before inserting a disc.
controlled.
instructions of your audio player.)
Bluetooth®
•
Disconnect and connect the Bluetooth player again.
More information
“DEVICE FULL” The number of registered devices has reached its limit. Retry after
For: – Latest firmware updates and latest compatible item list
deleting an unnecessary device.
( 13, DEVICE DELETE)
– KENWOOD original application
“N/A VOICE TAG” Make sure the same voice as the registered voice tag is used.
– Any other latest information
Visit <www.kenwood.com/cs/ce/>.
“NOT SUPPORT” The connected phone does not support Voice Recognition feature or
phonebook transfer.
General
“NO ENTRY”/“NO PAIR” There is no registered device connected/found via Bluetooth.
•
This unit can only play the following CDs:
“ERROR” Try the operation again. If “ERROR” appears again, check if the device
supports the function you have tried.
“NO INFO”/“NO DATA” Bluetooth device cannot get the contact information.
•
For detailed information and notes about the playable audio files, visit
<www.kenwood.com/cs/ce/audiofile/>.
“HF ERROR XX”/
Reset the unit and try the operation again. If this does not solve the
“BT ERROR”
problem, consult your nearest service center.
22
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 22JS_KWD_KDC_BT510U_EN_EN_5.indd 22 01-Sep-16 11:23:27 AM01-Sep-16 11:23:27 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
REFERENCES
Playable files
About Android device
•
Playable audio file:
•
This unit supports Android OS 4.1 and above.
For disc: MP3 (.mp3), WMA (.wma), AAC (.aac)
•
Some Android devices (with OS 4.1 and above) may not fully support Android
For USB mass storage class device: MP3 (.mp3), WMA (.wma), AAC (.aac), WAV (.wav), FLAC (.flac)
Open Accessory (AOA) 2.0.
•
Playable disc media: CD-R/CD-RW/CD-ROM
•
If the Android device supports both mass storage class device and AOA 2.0, this
•
Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name
unit always playback via AOA 2.0 as priority.
•
Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed above, playback may be impossible depending on
About Bluetooth
the types or conditions of media or device.
•
Depending on the Bluetooth version of the device, some Bluetooth devices may
AAC files encoded in (.m4a) format by iTunes cannot be played on this unit.
not be able to connect to this unit.
•
This unit may not work with some Bluetooth devices.
Unplayable discs
•
Signal conditions vary, depending on the surroundings.
•
Discs that are not round.
•
Discs with coloring on the recording surface or discs that are dirty.
•
Recordable/ReWritable discs that have not been finalized.
•
8cm CD. Attempting to insert using an adapter may cause malfunction.
About USB devices
•
You cannot connect a USB device via a USB hub.
•
Connecting a cable whose total length is longer than 5m may result in abnormal playback.
•
This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1.5A.
About iPod/iPhone
•
Via USB:
Made for
– iPod touch (5th and 6th generation)
– iPod nano (7th generation)
– iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE
•
Via Bluetooth:
Made for
– iPod touch (5th and 6th generation)
– iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE
•
You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.
•
Depending on the version of the operating system of the iPod/iPhone, some functions may not operate
on this unit.
ENGLISH
23
JS_KWD_KDC_BT510U_EN_EN_5.indd 23JS_KWD_KDC_BT510U_EN_EN_5.indd 23 01-Sep-16 11:23:28 AM01-Sep-16 11:23:28 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
REFERENCES
SPECIFICATIONS
Change the display information
FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space)
Each time you press
DISP
, the display information changes.
•
If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other
Usable Sensitivity (S/N=26dB) 0.71μV/75Ω
information (eg. station name, playing time) appears.
Quieting Sensitivity (DINS/N=46dB) 2.0μV/75Ω
Frequency Response (±3dB) 30 Hz — 15 kHz
Source name Display information
Signal-to-Noise Ratio (MONO) 64 dB
STANDBY Source name
Clock (back to the beginning)
Tuner
Stereo Separation (1kHz) 40dB
TUNER Frequency
Clock (back to the beginning)
MW
Frequency Range 531kHz — 1611kHz (9kHz space)
(For FM Radio Data System stations only)
(AM)
Usable Sensitivity (S/N=20dB) 28.2μV
Station name Radio text Radio text+ Title/Artist
Frequency
Clock (back to the beginning)
LW
Frequency Range 153kHz — 279kHz (9kHz space)
(AM)
CD or USB
(For CD-DA)
Usable Sensitivity (S/N=20dB) 50.0μV
Disc name/Artist Track title/Artist Playing time Clock
(back to the beginning)
Laser Diode GaAIAs
(For MP3/WMA/AAC/WAV/FLAC files)
Digital Filter (D/A) 8 times over sampling
Track title/Artist Album title/Artist Folder name File
Spindle Speed 500rpm — 200rpm (CLV)
name
Playing time Clock (back to the beginning)
Wow & Flutter Below measurable limit
iPod USB/
When
[MODE OFF]
/
[BROWSE MODE]
is selected
( 8)
:
iPodBT or
Track title/Artist
Album title/Artist Playing time Clock
Frequency Response (±1dB) 20Hz — 20kHz
ANDROID
(back to the beginning)
Total Harmonic Distortion (1kHz) 0.01%
BT AUDIO Track title/Artist
Album title/Artist Playing time Clock
Signal-to-Noise Ratio (1kHz) 105 dB
(back to the beginning)
CD player
Dynamic Range 90dB
AUX Source name
Clock (back to the beginning)
Channel Separation 85dB
MP3 Decode Compliant with MPEG-1/2 Audio Layer-3
WMA Decode Compliant with Windows Media Audio
AAC Decode AAC-LC “.aac” files
24
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 24JS_KWD_KDC_BT510U_EN_EN_5.indd 24 01-Sep-16 11:23:28 AM01-Sep-16 11:23:28 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
SPECIFICATIONS
USB Standard USB1.1, USB2.0 Full Speed
Maximum Output Power 50W×4
File System FAT12/16/32
Full Bandwidth Power 22W×4 (at less than 1% THD)
Maximum Supply Current DC5V
1.5A
Speaker Impedance 4Ω—8Ω
MP3 Decode Compliant with MPEG-1/2 Audio Layer-3
Tone Action Band 1: 62.5Hz±9dB
USB
Band 2: 100Hz±9dB
WMA Decode Compliant with Windows Media Audio
Band 3: 160 Hz±9dB
AAC Decode AAC-LC “.aac” files
Band 4: 250 Hz±9dB
Band 5: 400 Hz±9dB
WAV Decode Linear-PCM
Band 6: 630Hz±9dB
FLAC Decode FLAC file (Up to 48kHz/24bit)
Audio
Band 7: 1kHz±9dB
Band 8: 1.6kHz±9dB
Version Bluetooth 3.0
Band 9: 2.5kHz±9dB
Band 10: 4kHz±9dB
Frequency Range 2.402GHz — 2.480GHz
Band 11: 6.3kHz±9dB
Output Power +4dBm (MAX), 0dBm (AVE) Power Class 2
Band 12: 10kHz±9dB
Maximum Communication
Line of sight approx. 10m (32.8ft)
Band 13: 16kHz±9dB
Range
Preout Level/Load (CD) 2500mV/10kΩ
Bluetooth
Profile HFP 1.6 (Hands-Free Profile)
Preout Impedance ≤600Ω
A2DP (Advanced Audio Distribution Profile)
AVRCP 1.5 (Audio/Video Remote Control Profile)
Operating Voltage 14.4V (10.5V—16V allowable)
SPP (Serial Port Profile)
Maximum Current Consumption 10A
PBAP (Phonebook Access Profile)
Operational Temperature Range –10°C—+60°C
Frequency Response (±3dB) 20Hz—20kHz
General
Installation Size (W×H×D) 182mm×53mm×158mm
Input Maximum Voltage 1000mV
Net Weight (includes Trimplate,
1.3kg
Auxiliary
Input Impedance 30kΩ
Mounting Sleeve)
Subject to change without notice.
ENGLISH
25
JS_KWD_KDC_BT510U_EN_EN_5.indd 25JS_KWD_KDC_BT510U_EN_EN_5.indd 25 01-Sep-16 11:23:34 AM01-Sep-16 11:23:34 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
INSTALLATION/CONNECTION
Warning
Installing the unit (in-dash mounting)
•
The unit can only be used with a 12V DC power supply, negative ground.
•
Disconnect the battery’s negative terminal before wiring and mounting.
Do the required wiring.
•
Do not connect Battery wire (yellow) and Ignition wire (red) to the car
( 27)
chassis or Ground wire (black) to prevent a short circuit.
•
Insulate unconnected wires with vinyl tape to prevent a short circuit.
•
Be sure to ground this unit to the car’s chassis again after installation.
Caution
Hook on the top side
•
For safety’s sake, leave wiring and mounting to professionals. Consult the
car audio dealer.
Orientate the trim
Dashboard of
•
Install this unit in the console of your vehicle. Do not touch the metal
plate as illustrated
your car
parts of this unit during and shortly after use of the unit. Metal parts such
before fitting.
as the heat sink and enclosure become hot.
•
Do not connect the
[
wires of speakers to the car chassis or Ground wire
(black), or connect them in parallel.
Bend the appropriate tabs to hold the
•
Mount the unit at an angle of less than 30º.
mounting sleeve firmly in place.
•
If your vehicle wiring harness does not have the ignition terminal,
connect Ignition wire (red) to the terminal on the vehicle’s fuse box
which provides 12 V DC power supply and is turned on and off by the
How to remove the unit
ignition key.
1
Detach the faceplate.
•
Keep all cables away from heat dissipate metal parts.
2
Fit the catch pin on the extraction keys into the holes on
•
After the unit is installed, check whether the brake lamps, blinkers,
both sides of the trim plate, then pull it out.
wipers, etc. on the car are working properly.
3
Insert the extraction keys deeply into the slots on each side,
•
If the fuse blows, first make sure the wires are not touching car’s chassis,
then follow the arrows as shown on the illustration.
then replace the old fuse with one that has the same rating.
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
[
terminal of the car battery.
Part list for installation
2
Connect the wires properly.
See Wiring connection.
( 27)
3
Install the unit to your car.
See Installing the unit (in-dash mounting).
4
Connect the
[
terminal of the car battery.
5
Press to turn on the power.
(A)
Faceplate
(B)
Trim plate
(C)
Mounting
(D)
Wiring harness
(E)
Extraction
6
Detach the faceplate and reset the unit.
( 3)
sleeve
key
26
ENGLISH
JS_KWD_KDC_BT510U_EN_EN_5.indd 26JS_KWD_KDC_BT510U_EN_EN_5.indd 26 01-Sep-16 11:23:34 AM01-Sep-16 11:23:34 AM
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
INSTALLATION/CONNECTION
Wiring connection
Microphone input jack
( 10)
If your car does not have an ISO terminal:
We recommend installing the unit with a commercially
Rear/Subwoofer output
available custom wiring harness specific for your car and leave
For 3-way crossover:
Antenna terminal
this job to professionals for your safety. Consult your car audio
Woofer output
dealer.
Fuse (10A)
When connecting to an external amplifier, connect its ground
Connecting the ISO connectors on some VW/Audi or Opel
wire to the car’s chassis to avoid damaging the unit.
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring harness as
illustrated below.
If no connections are made, do not let the wire come out from
Yellow (Battery wire)
A7 (Red) Ignition wire (Red)
the tab.
UnitVehicle
STEERING WHEEL
Red (Ignition wire)
Light blue/yellow
REMOTE INPUT
To the steering wheel remote control
A4 (Yellow)
Battery wire (Yellow)
(Steering remote
REMOTE CONT
adapter
control wire)
Default wiring
Pin
Color and function (for ISO connectors)
Red (A7)
ANT CONT
A4 Yellow
:
Battery
Blue/White
To the power control terminal when
using the optional power amplifier
A5 Blue/White
:
Power control
(Power control wire/
P. CONT
or to the antenna control terminal in
Antenna control wire)
A7 Red
:
Ignition (ACC)
Yellow (A4)
the vehicle
A8 Black
:
Earth (ground) connection
B1
Purple
]
:
Rear speaker (right)
Brown
B2
Purple/black
[
For 3-way crossover: Tweeter (right)
To connect the Kenwood navigation
(Mute control wire)
MUTE
system, refer your navigation
B3
Gray
]
:
Front speaker (right)
manual
B4
Gray/black
[
For 3-way crossover: Mid range speaker (right)
B5
White
]
:
Front speaker (left)
B6
White/black
[
For 3-way crossover: Mid range speaker (left)
B7
ISO connectors
Green
]
:
Rear speaker (left)
B8
Green/black
[
For 3-way crossover: Tweeter (left)
ENGLISH
27
JS_KWD_KDC_BT510U_EN_EN_5.indd 27JS_KWD_KDC_BT510U_EN_EN_5.indd 27 01-Sep-16 11:23:35 AM01-Sep-16 11:23:35 AM
Book Size: B6L (182 mm x 128 mm)
Data Size: B6L (182 mm x 128 mm)
