Kenwood KDC-307: инструкция

Раздел: Авто, мото оборудование и транспорт

Тип: Автомагнитола

Инструкция к Автомагнитоле Kenwood KDC-307

CD-RECEIVER

KDC-4024

INSTRUCTION MANUAL

РAДИОПРИOMНИК С KOMПAKT–ДИСKAMИ

KDC-4024V

ИHCTPУKCИЯ ПO ЭKCПЛУATAЦИИ

ODTWARZACZ PŁYT KOMPAKTOWYCH

KDC-3024

PODRĘCZNIK OBSŁUGI

KDC-307

Изделие изготовлено в Индонезии

© B64-2539-00 / 00 (E2N)

Contents

Safety precautions......................3

RDS features .............................11

Menu system.............................17

About RDS ..................................5

Traffic Information

Menu System

English

Presetting Volume for Traffic Information

Touch Sensor Tone

About CDs...................................5

PTY (Program Type)

Manual Clock Adjustment

General features .........................6

Program Type preset

Synchronize Clock

Power

Changing Language for PTY Function

DSI (Disabled System Indicator)

Selecting the Source

CD/External disc control

Selectable Illumination

Volume

features ..................................14

News Bulletin with Timeout Setting

Attenuator

Playing CD

Local Seek

Loudness

Playing External Disc

Tuning Mode

System Q

Fast Forwarding and Reversing

Auto Memory Entry

Audio Control

Track Search

AF (Alternative Frequency)

Speaker Setting

Album Search

Restricting RDS Region (Region Restrict

Switching Display

Function)

Track/Album Repeat

Theft Deterrent Faceplate

Auto TP Seek

Track Scan

TEL Mute

Monaural Reception

Random Play

Tuner features .............................9

Text Scroll

Magazine Random Play

Tuning

Disc Naming

Disc Naming (DNPS)

Station Preset Memory

Power OFF Timer

Text/Title Scroll

Auto Memory Entry

Accessories ...............................22

Preset Tuning

Installation Procedure ..............22

Connecting Wires to Terminals 23

Installation ................................24

Troubleshooting Guide .............26

Specifications ...........................29

— 2

Safety precautions

IMPORTANT INFORMATION

2WARNING

2CAUTION

About CD players/disc changers

To prevent injury and/or fire, take the

To prevent damage to the machine,

connected to this unit

following precautions:

take the following precautions:

KENWOOD disc changers/ CD players

Insert the unit all the way until it is fully

Make sure to ground the unit to a negative

released in 1998 or later can be connected to

locked in place. Otherwise it may fly out of

12V DC power supply.

this unit.

place during collisions and other jolts.

Do not open the top or bottom covers of the

Refer to the catalog or consult your Kenwood

When extending the ignition, battery or

unit.

dealer for connectable models of disc

ground wires, make sure to use automotive-

changers/ CD players.

Do not install the unit in a spot exposed to

grade wires or other wires with an area of

Note that any KENWOOD disc changers/ CD

direct sunlight or excessive heat or humidity.

2

0.75mm

(AWG18) or more to prevent wire

players released in 1997 or earlier and disc

Also avoid places with too much dust or the

deterioration and damage to the wire

changers made by other makers cannot be

possibility of water splashing.

coating.

connected to this unit.

Do not set the removed faceplate or the

Unsupported connection may result in

•T o prevent short circuits, never put or leave

faceplate case in areas exposed to direct

damage.

any metallic objects (e.g., coins or metal

sunlight, excessive heat or humidity. Also

Setting the "O-N" Switch to the "N" position for

tools) inside the unit.

avoid places with too much dust or the

the applicable KENWOOD disc changers/ CD

•I f the unit starts to emit smoke or strange

possibility of water splashing.

players.

smells, turn off the power immediately and

•T o prevent deterioration, do not touch the

The functions that can be used and the

consult your Kenwood dealer.

terminals of the unit or faceplate with your

information that can be displayed will differ

Make sure not to get your fingers caught

fingers.

depending on the models being connected.

between the faceplate and the unit.

Do not subject the faceplate to excessive

You can damage both your unit and the CD

Be careful not to drop the unit or subject it to

shock, as it is a piece of precision equipment.

changer if you connect them incorrectly.

strong shock.

When replacing a fuse, only use a new one

The unit may break or crack because it

with the prescribed rating. Using a fuse with

Do Not Load 8-cm (3-in.) CDs in the CD

contains glass parts.

the wrong rating may cause your unit to

slot

Do not touch the liquid crystal fluid if the

malfunction.

If you try to load an 8-cm CD with its adapter

LCD is damaged or broken due to shock. The

•T o prevent short circuits when replacing a

into the unit, the adapter might separate from

liquid crystal fluid may be dangerous to your

fuse, first disconnect the wiring harness.

the CD and damage the unit.

health or even fatal.

Do not place any object between the

If the liquid crystal fluid from the LCD

faceplate and the unit.

contacts your body or clothing, wash it off

During installation, do not use any screws

with soap immediately.

except for the ones provided. The use of

improper screws might result in damage to

the main unit.

3

Safety precautions

Lens Fogging

Cleaning the CD Slot

NOTE

Right after you turn on the car heater in cold

As dust can accumulate in the CD slot, clean it

If you experience problems during

weather, dew or condensation may form on

occasionally. Your CDs can get scratched if

English

installation, consult your Kenwood dealer.

the lens in the CD player of the unit. Called

you put them in a dusty CD slot.

If the unit does not seem to be working

lens fogging, CDs may be impossible to play.

right, try pressing the reset button first. If

In such a situation, remove the disc and wait

that does not solve the problem, consult

for the condensation to evaporate. If the unit

your Kenwood dealer.

still does not operate normally after a whilst,

•Press the reset button if the Disc auto

consult your Kenwood dealer.

changer fails to operate correctly. Normal

operatin should be restored.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get

dirty, wipe them with a dry, soft cloth.

The marking of products using lasers

(Except for some areas)

Cleaning the Unit

If the faceplate of this unit is stained, wipe it

Reset button

CLASS 1

with a dry soft cloth such as a silicon cloth.

Characters in the LCD may become difficult

If the faceplate is stained badly, wipe the stain

LASER PRODUCT

to read in temperatures below 41 ˚F (5 ˚C).

off with a cloth moistened with neutral

cleaner, then wipe neutral detergent off.

The illustrations of the display and the panel

The label is attached to the chassis/case and

Applying spray cleaner directly to the unit may

appearing in this manual are examples used to

says that the component uses laser beams

affect its mechanical parts. Wiping the

explain more clearly how the controls are used.

that have been classified as Class 1. It means

faceplate with a hard cloth or using a volatile

Therefore, what appears on the display in the

that the unit is utilizing laser beams that are of

liquid such as thinner or alcohol may scratch

illustrations may differ from what appears on

a weaker class. There is no danger of

the surface or erases characters.

the display on the actual equipment, and some

hazardous radiation outside the unit.

of the illustrations on the display may represent

something impossible in actual operation.

— 4

About CDsAbout RDS

RDS (Radio Data System)

Handling CDs

CD cleaning

When listening to an RDS station, the

Don’t touch the recording surface of the CD.

Clean from the center of the disc and move

programme service name of the station is

outward.

displayed, advising you quickly which station

is being received.

RDS (Radio Data System) stations also

transmit alternative frequency data for the

same station. When you are making long

trips, this function automatically switches to

the particular frequency with the best

Removing CDs

reception for the particular network of

CD-R and CD-RW are easier to damage than

When removing CDs from this unit pull them

stations that you want to listen to. The data is

a normal music CD. Use a CD-R or a CD-RW

out horizontally.

automatically stored, allowing you to switch

after reading the caution items on the

CDs that can’t be used

quickly to another RDS stations, broadcasting

package etc.

CDs that aren’t round can’t be used.

the same programme, that has better

Don’t stick tape etc. on the CD.

reception. These include stations stored in the

Also, don’t use a CD with tape stuck on it.

station preset memory that you often listen

to.

When using a new CD

Enhanced Other Network

If the CD center hole or outside rim has burrs,

Stations that offer <Enhanced Other

use it after removing them with a ball pen etc.

Network> also transmit information about

CDs with coloring on the recording surface

other RDS stations that have traffic

or that are dirty can’t be used.

information. When you are tuned to a station

This unit can only play the CDs with

that is not transmitting traffic information, but

.

another RDS station starts transmitting a

Burrs

traffic bulletin, the tuner automatically

It may not correctly play discs which do not

switches to the other station for the duration

have the mark.

of the bulletin.

Burrs

•A CD-R or CD-RW that hasn’t been finalized

can’t be played. (For the finalization process

Alarm

refer to your CD-R/CD-RW writing software,

When an emergency transmission

and your CD-R/CD-RW recorder instruction

(announcing disasters, etc.) is sent, all current

manual.)

functions are interrupted to allow the warning

to be received.

CD storage

Don’t place them in direct sunlight (On the

seat or dashboard etc.) and where the

temperature is high.

CD accessories

Store CDs in their cases.

Don’t use disc type accessories.

— 5

General features

Power

Turning ON the Power

English

Press the [SRC] button.

Turning OFF the Power

Press the [SRC] button for at least 1 second.

Selecting the Source

Press the [SRC] button.

Source required Display

Tuner "TUNER"

CD "CD"

External disc "DISC"

(Function of the KDC-4024/KDC-4024V)

Standby (Illumination only mode) "ALL OFF"

This unit automatically turns full power OFF after 20 minutes lapses

in Standby mode in order to save the vehicles battery.

The time until full power OFF can be set in <Power OFF Timer>

(page 21).

Volume

Increasing Volume

Press the [u] button.

Decreasing Volume

Press the [d] button.

— 6

AM FM

¢4ud

SRC

CLKATT/

Q/

LOUD

AUD

Release button

LOUD indicator

ATT indicator

SYSTEM Q indicator

Easy "EASY"

Attenuator

Each setting value is changed with the <Speaker setting> (page

Turning the volume down quickly.

8).

Press the [ATT] button.

First, select the speaker type with the Speaker setting.

Each time the button is pressed the Attenuator turns ON or OFF.

When the System Q setting is changed, the Bass, Middle, and

When it’s ON, the "ATT" indicator blinks.

Treble set in audio control replace the System Q values.

Loudness

Audio Control

Compensating for low and high tones during low volume.

1 Select the source for adjustment

Press the [LOUD] button for at least 1 second.

Press the [SRC] button.

Each time the button is pressed for at least 1 second the

2 Enter Audio Control mode

Loudness turns ON or OFF.

Press the [AUD] button for at least 1 second.

When it’s ON, "LOUD" indicator is ON.

3 Select the Audio item for adjustment

Press the [FM] or [AM] button.

Each time the button is pressed the items that can be adjusted

switch as shown below.

System Q

4 Adjust the Audio item

You can recall the best sound setting preset for different types of

Press the [4] or [¢] button.

the music.

Adjustment Item Display Range

1 Select the source to set

Bass level "BAS" –8 — +8

Press the [SRC] button.

Middle level "MID" –8 — +8

2 Select the Sound type

Treble level "TRE" –8 — +8

Press the [Q] button.

Balance "BAL" Left 15 — Right 15

Each time the button is pressed the sound setting switches.

Fader "FAD" Rear 15 — Front 15

Sound setting Display

5 Exit Audio Control mode

Flat "FLAT"

Press the [AUD] button.

Rock "ROCK"

Top 40 "TOP40"

Pops "POPS"

Jazz "JAZZ"

— 7

General features

In CD & External disc source

Speaker Setting

Information Display

Fine-tuning so that the System Q value is optimal when setting

Track Time

the speaker type.

English

Disc name* "DNPS"

1 Enter Standby

Disc title* "D-TITLE"

Press the [SRC] button.

Track title* "T-TITLE"

Select the "ALL OFF" display.

Clock

2 Enter Speaker Setting mode

*: Function of the KDC-4024/KDC-4024V <In External disc control

Press the [Q] button.

mode>

3 Select the Speaker type

Press the [4] or [¢] button.

Each time the button is pressed the setting switches as shown

Theft Deterrent Faceplate

below.

The faceplate of the unit can be detached and taken with you,

Speaker type Display

helping to deter theft.

OFF "SP OFF"

Removing the Faceplate

For the OEM speaker "SP OEM"

Press the Release button.

For 6 & 6x9 in. speaker "SP 6/6x9"

The faceplate is unlocked, allowing you to detach it.

For 5 & 4 in. speaker "SP 5/4"

The faceplate is a precision piece of equipment and can be

4 Exit Speaker Setting mode

damaged by shocks or jolts. For that reason, keep the faceplate in

Press the [Q] button.

its special storage case while detached.

Do not expose the faceplate or its storage case to direct sunlight

or excessive heat or humidity. Also avoid places with too much

dust or the possibility of water splashing.

Switching Display

Reattaching the Faceplate

Switching the information displayed.

1 Align the projections on the unit with the grooves on the

faceplate.

Press the [CLK] button.

Each time the button is pressed the display switches as shown

below.

In Tuner source

Information

Program Service name or Frequency

Clock

— 8

Tuner features

2 Push the faceplate in until it clicks.

The faceplate is locked in place, allowing you to use the unit.

TEL Mute

The audio system automatically mutes when a call comes in.

When a call comes in

"CALL" is displayed.

The audio system pauses.

Listening to the audio during a call

Press the [SRC] button.

The "CALL" display disappears and the audio system comes back

ON.

When the call ends

Hang up the phone.

The "CALL" display disappears and the audio system comes back

ON.

— 9

AM

FM

¢4

SRC

#1 - 6

MENU

Band display

Preset station number

AUTO indicator

Frequency display

ST indicator

Tuner features

Tuning

Auto Memory Entry

Selecting the station.

Putting a station with good reception in the memory

automatically.

English

1 Select tuner source

Press the [SRC] button.

1 Select the band for Auto Memory Entry

Select the "TUNER" display.

Press the [FM] or [AM] button.

2 Select the band

2 Enter Menu mode

Press the [FM] or [AM] button.

Press the [MENU] button for at least 1 second.

Each time the [FM] button is pressed it switches between the

"MENU" is displayed.

FM1, FM2, and FM3 bands.

3 Select the Auto Memory Entry mode

3 Tune up or down band

Press the [FM] or [AM] button.

Press the [4] or [¢] button.

Select the "A-MEMORY" display.

During reception of stereo stations the "ST" indicator is ON.

4 Open Auto Memory Entry

Press the [4] or [¢] button for at least 2 seconds.

When 6 stations that can be received are put in the memory

Auto Memory Entry closes.

When the <AF Function> (page 20) is ON, only RDS stations are

Station Preset Memory

put in the memory.

When Auto Memory Entry is done in the FM2 band, the RDS

Putting the station in the memory.

stations preset in the FM1 band aren't put in the memory.

Likewise, when it is done in the FM3 band, RDS stations preset in

1 Select the band

FM1 or FM2 aren't put in the memory.

Press the [FM] or [AM] button.

2 Select the frequency to put in the memory

Press the [4] or [¢] button.

3 Put the frequency in the memory

Press the [#1] — [#6] button for at least 2 seconds.

The preset number display blinks 1 time.

On each band, 1 station can be put in the memory on each [#1]

— [#6] button.

— 10

RDS features

Preset Tuning

Calling up the stations in the memory.

1 Select the band

Press the [FM] or [AM] button.

2 Call up the station

Press the [#1] [#6] button.

— 11

FM/

AM

PTY

¢4

#1 - 6

CLK

TI/

VOL ADJ

PTY indicator

RDS indicator

NEWS indicator

TI indicator

RDS features

Traffic Information

PTY (Program Type)

Switching to traffic information automatically when a traffic

Selecting the Program Type and searching for a station.

bulletin starts even when you aren't listening to the radio.

English

1 Enter PTY mode

Press the [TI] button.

Press the [PTY] button for at least 1 second.

Each time the button is pressed the Traffic Information function

During PTY mode the "PTY" indicator is ON.

turns ON or OFF.

When it's ON, "TI" indicator is ON.

This function can't be used during a traffic bulletin or AM reception.

When a traffic information station isn't being received the "TI"

indicator blinks.

2 Select the Program Type

When a traffic bulletin starts, "TRAFFIC" is displayed it and it

Press the [FM] or [AM] button.

switches to traffic information.

Each time the button is pressed the Program Type switches as

During reception of a AM station when the Traffic Information

shown below.

function is turned ON, it switches to a FM station.

No. Program Type Display

Receiving other traffic information stations

1. Music "MUSIC"

Press the [4] or [¢] button.

2. Speech "SPEECH"

Traffic information station switching can be done when listening to

3. News "NEWS"

the radio.

4. Current Affairs "AFFAIRS"

5. Information "INFO"

6. Sport "SPORT"

7. Education "EDUCATE"

8. Drama "DRAMA"

9. Culture "CULTURE"

Presetting Volume for Traffic Information

10. Science "SCIENCE"

Setting the volume during Traffic Information.

11. Varied "VARIED"

12. Pop Music "POP M"

1 Receive the station.

13. Rock Music "ROCK M"

2 Set the volume you want.

14. Easy Listening Music "EASY M"

3 Preset the volume

15. Light Classical "LIGHT M"

Press the [VOL ADJ] button for at least 2 seconds.

16. Serious Classical "CLASSICS"

The volume level display blinks 1 time.

17. Other Music "OTHER M"

18. Weather "WEATHER"

19. Finance "FINANCE"

20. Children's programs "CHILDREN"

— 12

21. Social Affairs "SOCIAL"

calling it up quickly.

22. Religion "RELIGION"

Presetting the Program Type

23. Phone In "PHONE IN"

24. Travel "TRAVEL"

1 Select the Program Type to preset

25. Leisure "LEISURE"

Refer to <PTY(Program Type)> (page 12).

26. Jazz Music "JAZZ"

2 Preset the Program Type

27. Country Music "COUNTRY"

Press the [#1] [#6] button for at least 2 seconds.

28. National Music "NATION M"

Calling up the preset Program Type

29. Oldies Music "OLDIES"

30. Folk Music "FOLK M"

1 Enter PTY mode

Refer to <PTY(Program Type)> (page 12).

31. Documentary "DOCUMENT"

Speech and Music include the Program type shown below.

2 Call up the Program Type

Music: No.12 17, 26 30

Press the [#1] [#6] button.

Speech: No.3 11, 18 25, 31

The Program Type can be put in the [#1] [#6] button memory

and called up quickly. Refer to the <Program Type preset> (page

13).

The display language can be changed. Refer to <Changing

Language for PTY Function> (page 13).

Changing Language for PTY Function

3 Search for the selected Program Type station

Selecting the Program Type display language.

Press the [4] or [¢] button.

When you want to search for other stations press the [4] or

1 Enter PTY mode

[¢] button again.

Refer to <PTY (Program Type)> (page 12).

When the selected Program Type isn't found, "NO PTY" is displayed.

2 Enter Changing Language mode

Select another Program Type.

Press the [CLK] button.

4 Exit PTY mode

3 Select the language

Press the [PTY] button for at least 1 second.

Press the [#1] [#3] button.

Button Language

[#1] English

[#2] French

[#3] German

Program Type preset

4 Exit Changing Language mode

Putting the Program Type in the Preset button memory and

Press the [CLK] button.

— 13

CD/External disc control features

Playing CD

When a CD is inserted

English

Press the [SRC] button.

Select the "CD" display.

When a CD is inserted, the "IN" indicator is ON.

Eject the CD

Press the [0] button.

3 in. (8cm) CD cannot be played. Using an adapter and inserting

them into this unit can cause damage.

Function of the KDC-4024/KDC-4024V

Playing External Disc

Playing discs set in the optional accessory disc player connected

to this unit.

Press the [SRC] button.

Select the display for the disc player you want.

Display examples:

Display Disc player

"CD-2" CD player

"DISC" CD changer

"DISC" MD changer

Disc #10 is displayed as "0".

The functions that can be used and the information that can be

displayed will differ depending on the external disc players being

connected.

— 14

AM/

FM/

DISC-

DISC+

0

¢4

SRC

SCAN M.RDM

REP

SCRL

RDM

MENU

Track number

Disc number

Track time

IN indicator

shown below.

Fast Forwarding and Reversing

Repeat play Display

Fast Forwarding

Track Repeat "REP ON"/

Hold down on the [¢] button.

"TREP ON"

Release your finger to play the disc at that point.

Album Repeat (Function of disc changer) "DREP ON"

Reversing

OFF "REP OFF"

Hold down on the [4] button.

Release your finger to play the disc at that point.

Track Scan

Playing the first part of each song on the disc you are listening

Track Search

to and searching for the song you want to listen to.

Selecting the song you want to hear.

1 Start Track Scan

Press the [4] or [¢] button.

Press the [SCAN] button.

"SCAN ON"/"TSCN ON" is displayed.

2 Release it when the song you want to listen to is played

Press the [SCAN] button.

Function of the KDC-4024/KDC-4024V

Album Search (Function of disc changer)

Random Play

Selecting the disc you want to hear.

Playing all the songs on the disc in random order.

Press the [DISC–] or [DISC+] button.

Press the [RDM] button.

Each time the button is pressed Random Play turns ON or OFF.

When it's ON, "RDM ON" is displayed.

When the [¢] button is pressed, the next song select starts.

Track/Album Repeat

Replaying the track/disc you're listening to.

Press the [REP] button.

Each time the button is pressed the Repeat Play switches as

— 15

CD/External disc control features

Function of the KDC-4024/KDC-4024V

6 Select the characters

Magazine Random Play

Press the [FM] or [AM] button.

(Function of disc changer)

7 Repeat steps 5 through 6 and attach a name.

English

Play the songs on all the discs in the disc changer in random

8 Exit Menu mode

order.

Press the [MENU] button.

Press the [M.RDM] button.

When operation stops for 10 seconds the name at that time is

Each time the button is pressed the Magazine Random Play turns

registered, and Name Set mode closes.

ON or OFF.

Media that you can attach a name to

When it's ON, "MRDM ON" is displayed.

- External CD changer/ player: Varies according to the CD changer/

player. Refer to the CD changer/ player manual.

When the [¢] button is pressed, the next song select starts.

The name of a CD can be changed by the same operation you

used to name it.

Function of the KDC-4024/KDC-4024V

Function of the KDC-4024/KDC-4024V

Disc Naming (DNPS) (Function of disc changer)

Text/Title Scroll

Attaching a title to a CD.

Scrolling the displayed CD text or MD title.

Press the [SCRL] button.

1 Play the disc you want to attach a name to

A title can't be attached to a MD.

2 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

3 Select Name set mode

Press the [FM] or [AM] button.

Select the "NAME SET" display.

4 Enter Name set mode

Press the [4] or [¢] button for at least 2 seconds.

5 Move the cursor to the enter character position

Press the [4] or [¢] button.

— 16

Menu system

Menu System

Setting during operation beep sound etc. functions.

The Menu system basic operation method is explained here. The

reference for the Menu items and their setting content is after

this operation explanation.

1 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

2 Select the menu item

Press the [FM] or [AM] button.

Example: When you want to set the beep sound select the

"BEEP" display.

3 Set the menu item

Press the [4] or [¢] button.

Example: When "BEEP" is selected, each time the button is

pressed it switches "BEEP ON" or "BEEP OFF". Select 1

of them as the setting.

You can continue by returning to step 2 and setting other items.

4 Exit Menu mode

Press the [MENU] button.

When other items that are applicable to the basic operation method

above are displayed afterwards their setting content chart is

entered. (Normally the uppermost setting in the chart is the original

setting.)

Also, the explanation for items that aren't applicable (<Manual Clock

Adjustment>etc.) are entered step by step.

— 17

AM

FM

¢4

MENU

Menu display

AUTO indicator

RDS indicator

NEWS indicator

Menu system

Touch Sensor Tone

Synchronize Clock

Setting the operation check sound (beep sound) ON/OFF.

Synchronizing the RDS station time data and this unit's clock.

English

Display Setting

Display Setting

"BEEP ON" Beep is heard.

"SYNC ON" Synchronizes the time.

"BEEP OFF" Beep canceled.

"SYNC OFF" Adjust the time manually.

It takes 3 to 4 minutes to synchronize the clock.

Manual Clock Adjustment

This adjustment can be done when the <Synchronize Clock> (page

DSI (Disabled System Indicator)

18) is set as OFF.

A red indicator will blink on the unit after the faceplate is

1 Select Clock Adjustment mode

removed, warning potential thieves.

Press the [FM] or [AM] button.

Display Setting

Select the "CLK ADJ" display.

"DSI ON" LED flashes.

2 Enter Clock Adjust mode

"DSI OFF" LED OFF.

Press the [4] or [¢] button for at least 2 seconds.

The clock display blinks.

3 Adjust the hours

Press the [FM] or [AM] button.

Adjust the minutes

Function of the KDC-4024/KDC-4024V

Press the [4] or [¢] button.

Selectable Illumination

4 Exit Clock adjustment mode

Selecting the button illumination color as green or red.

Press the [MENU] button.

Display Setting

"COL GRN" The illumination color is green.

"COL RED" The illumination color is red.

— 18

News Bulletin with Timeout Setting

Tuning Mode <In Tuner mode>

It switches automatically when a news bulletin starts even if the

Sets the tuning mode.

radio isn't being listened to. Also, the time interval when

Tuning mode Display Operation

interrupt is prohibited can be set.

Auto seek "AUTO 1" Automatic search for a station.

Display and Setting

Preset station seek "AUTO 2" Search in order of the stations

"NEWS OFF"

in the Preset memory.

"NEWS 00M"

Manual "MANUAL" Normal manual tuning control.

"NEWS 90M"

When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin

Interrupt function is ON.

When it's ON, the "NEWS" indicator is ON.

Auto Memory Entry <In Tuner mode>

When the news bulletin starts, "NEWS" is displayed, and it

For the operation method refer to <Auto Memory Entry> (page

switches to the news bulletin.

10).

If you choose the "20M" setting, further news bulletins will not be

received for 20 minutes once the first news bulletin is received.

The news bulletin volume is the same level that was set for traffic

information (page 12).

This function is only available if the desired station sends PTY-code

for news bulletin or belongs to <Enhanced Other Network>-

Network sending PTY-code for news bulletin.

When the News Bulletin Interrupt function is ON, it switches to an

FM station.

Local Seek <In Tuner mode>

Only stations whose reception is good are searched for in auto

seek tuning.

Display Setting

"LO.S OFF" The local seek function is OFF.

"LO.S ON" The local seek function is ON.

— 19

Menu system

AF (Alternative Frequency)

Auto TP Seek

When poor reception is experienced, automatically switch to

When the TI function is ON and poor reception conditions are

another frequency broadcasting the same program in the same

experienced when listening to a traffic information station,

English

RDS network with better reception.

another traffic information station with better reception will be

searched for automatically.

Display Setting

"AF ON" The AF function is ON.

Display Setting

"AF OFF" The AF function is OFF.

"ATPS ON" The Auto TP Seek Function is ON.

"ATPS OFF" The Auto TP Seek Function is OFF.

When the AF function is ON, the "RDS" indicator is ON.

When no other stations with stronger reception are available for the

same program in the RDS network, you may hear the incoming

broadcast in bits and snatches. Turn OFF the AF function in such a

case.

Monaural Reception <In FM reception>

Noise can be reduced when stereo broadcasts are received as

monaural.

Display Setting

Restricting RDS Region

"MONO OFF" The monaural reception is OFF.

(Region Restrict Function)

"MONO ON" The monaural reception is ON.

You can choose whether or not to restrict the RDS channels,

received with the AF function for a particular network, to a

specific region.

Display Setting

"REG ON" The Region Restrict Function is ON.

Function of the KDC-4024/KDC-4024V

"REG OFF" The Region Restrict Function is OFF.

Text Scroll <In External disc control mode>

Setting the displayed text scroll.

Sometimes stations in the same network broadcast different

programs or use different program service names.

Display Setting

"SCL MANU" Doesn't scroll.

"SCL AUTO" Scrolls when the display changes.

The text scrolled is shown below.

• CD text

• MD title

— 20

Аннотации для Автомагнитолы Kenwood KDC-307 в формате PDF