Kenwood KMM-BT203: инструкция

KMM-BT203

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

DIGITAL-MEDIA-RECEIVER

BEDIENUNGSANLEITUNG

RICEVITORE MULTIMEDIALE DIGITALE

ISTRUZIONI PER L’USO

ЦИФРОВОЙ МЕДИА-РЕСИВЕР

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

B5A-1344-00 (EN)© 2016 JVC KENWOOD Corporation

JS_KWD_KMM_BT203_EN_C_1.indd 1JS_KWD_KMM_BT203_EN_C_1.indd 1 9/30/2016 4:46:24 PM9/30/2016 4:46:24 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

For Israel

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable

for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling

these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and

waste disposal will help conserve resources whilst preventing detrimental effects on our health and the

environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien

(годности) данного товара “по истечении которого он может представлять опасность для жизни,

(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass

лет со дня производства.

dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle

für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die

храниться в течение двух (2) лет со дня его производства.

Gesundheit Ihrer Mitmenschen.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов,

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen

упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в

über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen

частности, гарантийного обслуживания KENWOOD, которое он может получить в соответствии с

Entsorgungsbetrieben.

законом о правах потребителя или других законов, связанных с ним.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

Условия хранения:

Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e

Температура : от -30°C до +85°C

delle batterie (valide per i paesi che hanno adottato sistemi di raccolta differenziata)

Влажность : от 0% до 90%

I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono

essere smaltiti insieme ai normali rifiuti di casa.

I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un’apposita struttura in

grado di trattare questi prodotti e di smaltirne i loro componenti.

Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l’apposito ufficio

comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla

salute e all’ambiente.

Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene piombo.

i

JS_KWD_KMM_BT203_EN_C_1.indd iJS_KWD_KMM_BT203_EN_C_1.indd i 9/30/2016 4:46:24 PM9/30/2016 4:46:24 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to

connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to

meet Apple performance standards. Apple is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please note that the use of this accessory with iPod

or iPhone may affect wireless performance.

• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the

U.S. and other countries.

• Lightning is a trademark of Apple Inc.

• The “AAC” logo is a trademark of Dolby Laboratories.

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any

use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names

are those of their respective owners.

• Android is trademark of Google Inc.

libFLAC

Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh Coalson

Redistribution and use in source and binary forms, with or without modification, are permitted provided

that the following conditions are met:

- Redistributions of source code must retain the above copyright notice, this list of conditions and the

following disclaimer.

- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and

the following disclaimer in the documentation and/or other materials provided with the distribution.

- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to

endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL

THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

ii

JS_KWD_KMM_BT203_EN_C_1.indd iiJS_KWD_KMM_BT203_EN_C_1.indd ii 9/30/2016 4:46:24 PM9/30/2016 4:46:24 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

English

Español

Hereby, JVCKENWOOD declares that the radio equipment

Por la presente, JVCKENWOOD declara que el equipo de

“KMM-BT203” is in compliance with Directive 2014/53/EU.

radio “KMM-BT203” cumple la Directiva 2014/53/EU.

The full text of the EU declaration of conformity is available

El texto completo de la declaración de conformidad con la

Declaration of Conformity with regard to the RE Directive 2014/53/EU

at the following internet address:

UE está disponible en la siguiente dirección de internet:

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

http://www.kenwood.com/cs/ce/eudoc/

http://www.kenwood.com/cs/ce/eudoc/

Manufacturer:

Français

Português

JVC KENWOOD Corporation

Par la présente, JVCKENWOOD déclare que l’équipement

Deste modo, a JVCKENWOOD declara que o equipamento

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

radio « KMM-BT203 » est conforme à la directive

de rádio “KMM-BT203” está em conformidade com a

EU Representative:

2014/53/UE.

Diretiva 2014/53/UE.

JVCKENWOOD NEDERLAND B.V.

L’intégralité de la déclaration de conformité UE est

O texto integral da declaração de conformidade da UE está

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

disponible à l’adresse Internet suivante :

disponível no seguinte endereço de internet:

http://www.kenwood.com/cs/ce/eudoc/

http://www.kenwood.com/cs/ce/eudoc/

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU

Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Deutsch

Polska

Hiermit erklärt JVCKENWOOD, dass das Funkgerät

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy

Hersteller:

“KMM-BT203” der Richtlinie 2014/53/EU entspricht.

“KMM-BT203” jest zgodny z dyrektywą 2014/53/UE.

JVC KENWOOD Corporation

Der volle Text der EU-Konformitätserklärung steht unter

Pełny tekst deklaracji zgodności EU jest dostępny pod

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

der folgenden Internetadresse zur Verfügung:

adresem:

EU-Vertreter:

http://www.kenwood.com/cs/ce/eudoc/

http://www.kenwood.com/cs/ce/eudoc/

JVCKENWOOD NEDERLAND B.V.

Nederlands

Český

Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Hierbij verklaart JVCKENWOOD dat de radioapparatuur

Společnost JVCKENWOOD tímto prohlašuje, že rádiové

“KMM-BT203” in overeenstemming is met Richtlijn

zařízení “KMM-BT203” splňuje podmínky směrnice

Dichiarazione di conformità alla Direttiva RE 2014/53/EU

2014/53/EU.

2014/53/EU.

Dichiarazione di conformità relativa alla direttiva RoHS 2011/65/EU

De volledige tekst van de EU-verklaring van

Plný text EU prohlášení o shodě je dostupný na následující

Produttore:

overeenstemming is te vinden op het volgende

internetové adrese:

JVC KENWOOD Corporation

internetadres:

http://www.kenwood.com/cs/ce/eudoc/

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

http://www.kenwood.com/cs/ce/eudoc/

Magyar

Rappresentante UE:

Italiano

JVCKENWOOD ezennel kijelenti, hogy a „KMM-BT203“

JVCKENWOOD NEDERLAND B.V.

Con la presente, JVCKENWOOD dichiara che l΄apparecchio

rádióberendezés megfelel a 2014/53/EU irányelvnek.

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

radio “KMM-BT203” è conforme alla Direttiva

Az EU konformitási nyilatkozat teljes szövege az alábbi

2014/53/UE.

weboldalon érhető el:

Декларация соответствия относительно Директивы 2014/53/EU RE

Il testo integrale della dichiarazione di conformità UE è

http://www.kenwood.com/cs/ce/eudoc/

Декларация соответствия относительно Директивы 2011/65/EU об

disponibile al seguente indirizzo internet:

ограничении содержания вредных веществ

http://www.kenwood.com/cs/ce/eudoc/

Производитель:

ДжейВиСи КЕНВУД Корпорейшн

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония

Представительство в EC:

ДжейВиСиКЕНВУД Нидерланд Би.Ви.

Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды

iii

JS_KWD_KMM_BT203_EN_C_1.indd iiiJS_KWD_KMM_BT203_EN_C_1.indd iii 9/30/2016 4:46:24 PM9/30/2016 4:46:24 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Svenska

Dansk

Lietuviškai

БЪЛГАРСКИ

Härmed försäkrar JVCKENWOOD att

Herved erklærer JVCKENWOOD, at radioudstyret

Šiuo JVCKENWOOD pažymi, kad radijo įranga

С настоящото JVCKENWOOD декларира, че

radioutrustningen “KMM-BT203” är i enlighet med

“KMM-BT203” er i overensstemmelse med

„KMM-BT203“ atitinka 2014/53/EB direktyvos

радиооборудването на “KMM-BT203” е в

direktiv 2014/53/EU.

Direktiv 2014/53/EU.

reikalavimus.

съответствие с Директива 2014/53/ЕС.

Den fullständiga texten av EU-försäkran

EU-overensstemmelseserklæringens fulde ordlyd

Visą EB direktyvos atitikties deklaracijos tekstą

Пълният текст на ЕС декларацията за

om överensstämmelse finns på följande

er tilgængelig på følgende internetadresse:

galite rasti šiuo internetiniu adresu:

съответствие е достъпен на следния интернет

Internetadress:

http://www.kenwood.com/cs/ce/eudoc/

http://www.kenwood.com/cs/ce/eudoc/

адрес:

http://www.kenwood.com/cs/ce/eudoc/

http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Malti

Suomi

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-

Turkish

JVCKENWOOD julistaa täten, että radiolaite

ραδιοεξοπλισμός «KMM-BT203» συμμορφώνεται

radju “KMM-BT203” huwa konformi

Burada, JVCKENWOOD “KMM-BT203” radyo

“KMM-BT203” on direktiivin 2014/53/EU

με την Οδηγία 2014/53/ΕΕ.

mad-Direttiva 2014/53/UE.

ekipmanının 2014/53/AB Direktifine uygun

mukainen.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης

It-test kollu tad-dikjarazzjoni ta’ konformità huwa

olduğunu bildirir.

EU-vaatimustenmukaisuusvakuutusvaatimus

της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση

disponibbli fl-indirizz intranet li ġej:

AB uyumluluk deklarasyonunun tam metni

löytyy kokonaisuudessaan seuraavasta internet-

στο διαδίκτυο:

http://www.kenwood.com/cs/ce/eudoc/

aşağıdaki internet adresinde mevcuttur.

osoitteesta:

http://www.kenwood.com/cs/ce/eudoc/

http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

http://www.kenwood.com/cs/ce/eudoc/

Eesti

JVCKENWOOD ovim izjavljuje da je radio oprema

Русский

Slovensko

Käesolevaga JVCKENWOOD kinnitab, et

“KMM-BT203” u skladu s Direktivom 2014/53/EU.

JVCKENWOOD настоящим заявляет,

S tem JVCKENWOOD izjavlja, da je radijska oprema

„KMM-BT203“ raadiovarustus on vastavuses

Cjeloviti tekst deklaracije Europske unije o

что радиооборудование «KMM-BT203»

»KMM-BT203« v skladu z Direktivo 2014/53/EU.

direktiiviga 2014/53/EL.

usklađenosti dostupan je na sljedećoj internet

соответствует Директиве 2014/53/EU.

Celotno besedilo direktive EU o skladnosti je

ELi vastavusdeklaratsiooni terviktekst on

adresi:

Полный текст декларации соответствия

dostopno na tem spletnem naslovu:

kättesaadav järgmisel internetiaadressil:

http://www.kenwood.com/cs/ce/eudoc/

ЕС доступен по следующему адресу в сети

http://www.kenwood.com/cs/ce/eudoc/

http://www.kenwood.com/cs/ce/eudoc/

Интернет:

ROMÂNĂ

http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Latviešu

Prin prezenta, JVCKENWOOD declară că

Spoločnosť JVCKENWOOD týmto vyhlasuje, že

JVCKENWOOD ar šo deklarē, ka radio aparatūra

echipamentul radio “KMM-BT203” este în

Українська

rádiové zariadenie „KMM-BT203“ vyhovuje

„KMM-BT203” atbilst direktīvas 2014/53/ES

conformitate cu Directiva 2014/53/UE.

Таким чином, компанія JVCKENWOOD заявляє,

smernici 2014/53/EÚ.

prasībām.

Textul integral al declarației de conformitate UE

що радіообладнання «KMM-BT203» відповідає

Celý text EÚ vyhlásenia o zhode nájdete na

Pilns ES atbilstības deklarācijas teksts ir pieejams

este disponibil la urmatoarea adresă de internet:

Директиві 2014/53/EU.

nasledovnej internetovej adrese:

šādā tīmekļa adresē:

http://www.kenwood.com/cs/ce/eudoc/

Повний текст декларації про відповідність ЄС

http://www.kenwood.com/cs/ce/eudoc/

http://www.kenwood.com/cs/ce/eudoc/

можна знайти в Інтернеті за такою адресою:

http://www.kenwood.com/cs/ce/eudoc/

iv

JS_KWD_KMM_BT203_EN_C_1.indd ivJS_KWD_KMM_BT203_EN_C_1.indd iv 9/30/2016 4:46:25 PM9/30/2016 4:46:25 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CONTENTS

BEFORE USE

BEFORE USE 2

IMPORTANT

•

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe

BASICS 3

Warning and Caution in this manual.

GETTING STARTED 3

•

Please keep the manual in a safe and accessible place for future reference.

1 Select the display language

and cancel the demonstration

WARNING

2 Set the clock and date

•

Do not operate any function that takes your attention away from safe driving.

3 Set the initial settings

Caution

RADIO 5

Volume setting:

USB/iPod/ANDROID 7

•

Adjust the volume so that you can hear sounds outside the car to prevent accidents.

•

Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

AUX 9

General:

•

Avoid using the external device if it might hinder safe driving.

BLUETOOTH® 10

•

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

AUDIO SETTINGS 16

•

Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

•

USB rating is indicated on the main unit. To view, detach the faceplate.

( 3)

DISPLAY SETTINGS 19

•

Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected

( 26)

. Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

TROUBLESHOOTING 20

REFERENCES 22

How to read this manual

Maintenance

•

Operations are explained mainly using buttons on the faceplate.

More information

•

English indications are used for the purpose of explanation. You can select the display language from the

[FUNCTION]

menu.

( 5)

•

[XX]

indicates the selected items.

SPECIFICATIONS 23

•

( XX)

indicates references are available on the stated page.

INSTALLATION/

CONNECTION 25

2

ENGLISH

JS_KWD_KMM_BT203_EN_EN_1.indd 2JS_KWD_KMM_BT203_EN_EN_1.indd 2 9/30/2016 4:47:07 PM9/30/2016 4:47:07 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BASICS

GETTING STARTED

Faceplate

Volume knob

Display window

1

Select the display language and cancel the

demonstration

When you turn on the power for the first time (or

Detach button

[FACTORY RESET]

is set to

[YES]

,

4

), the display shows:

“SEL LANGUAGE”

“PRESS” “VOLUME KNOB”

1 Turn the volume knob to select

[ENG]

(English),

[RUS]

(Russian) or

[SPA]

(Spanish), then press the knob.

How to resetAttach Detach

[ENG]

is selected for the initial setup.

Then, the display shows: “CANCEL DEMO”

“PRESS”

“VOLUME KNOB”.

2 Press the volume knob.

[YES]

is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

To On the faceplate

Then, the display shows the selected crossover type:

Turn on the power

Press

.

“2-WAY X ’ OVER” or “3-WAY X ’ OVER”

• Press and hold to turn off the power.

• To change the crossover type, see “Change the crossover

type”. (



5

)

Adjust the volume Turn the volume knob.

Select a source

Press

repeatedly.

Change the display information Press DISP repeatedly.

( 23)

ENGLISH

3

JS_KWD_KMM_BT203_EN_EN_1.indd 3JS_KWD_KMM_BT203_EN_EN_1.indd 3 9/30/2016 4:47:10 PM9/30/2016 4:47:10 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

GETTING STARTED

Default:

XX

2

Set the clock and date

AUDIO CONTROL

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[CLOCK]

, then press the knob.

SWITCH

(Not applicable if 3-way crossover is selected.)

PREOUT

REAR

/

SUB-W

: Selects whether rear speakers or a subwoofer are

To adjust the clock

connected to the line out terminals on the rear (through an external

3 Turn the volume knob to select

[CLOCK ADJUST]

, then press the knob.

amplifier).

( 26)

4 Turn the volume knob to make the settings, then press the knob.

Hour

Minute

TUNER SETTING

5 Turn the volume knob to select

[CLOCK FORMAT]

, then press the knob.

PRESET TYPE

NORMAL

:Memorizes one station for each preset button in each band

6 Turn the volume knob to select

[12H]

or

[24H]

, then press the knob.

(FM1/FM2/FM3/MW/LW).;

MIX

:Memorizes one station for each preset

To set the date

button, regardless of the selected band.

7 Turn the volume knob to select

[DATE FORMAT]

, then press the knob.

SYSTEM

8 Turn the volume knob to select

[DD/MM/YY]

or

[MM/DD/YY]

, then press

the knob.

KEY BEEP

(Not applicable if 3-way crossover is selected.)

9 Turn the volume knob to select

[DATE SET]

, then press the knob.

ON

:Activates the keypress tone.;

OFF

:Deactivates.

10 Turn the volume knob to make the settings, then press the knob.

SOURCE SELECT

Day

Month Year or Month Day Year

11 Press and hold to exit.

BUILT-IN AUX

ON

:Enables AUX in source selection.;

OFF

:Disables.

( 9)

To return to the previous setting item, press .

P-OFF WAIT

Applicable only when the demonstration mode is turned off.

Sets the duration when the unit will automatically turn off (while in

3

standby mode) to save the battery.

Set the initial settings

20M

: 20minutes;

40M

: 40minutes;

60M

: 60minutes;

– – –

:Cancels

1

Press repeatedly to enter STANDBY.

F/W UPDATE

2 Press the volume knob to enter

[FUNCTION]

.

3 Turn the volume knob to select an item (see the following table),

UPDATE SYSTEM

then press the knob.

F/W UP xxxx

YES

:Starts upgrading the firmware.;

NO

:Cancels (upgrading is not

4 Repeat step 3 until the desired item is selected or activated.

activated).

5 Press and hold to exit.

For details on how to update the firmware, visit

To return to the previous setting item, press .

<www.kenwood.com/cs/ce/>.

FACTORY RESET YES

:Resets the settings to default (except the stored station).;

NO

:Cancels

4

ENGLISH

JS_KWD_KMM_BT203_EN_EN_1.indd 4JS_KWD_KMM_BT203_EN_EN_1.indd 4 9/30/2016 4:47:14 PM9/30/2016 4:47:14 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

GETTING STARTED

RADIO

CLOCK

CLOCK DISPLAY

ON

:The clock time is shown on the display even when the unit

is turned off.;

OFF

:Cancels.

ENGLISH

Select the display language for

[FUNCTION]

menu and music

РУССКИЙ

information if applicable.

By default,

[ENGLISH]

is selected.

ESPANOL

Search for a station

Change the crossover type

1

Press repeatedly to select TUNER.

1

Press repeatedly to enter STANDBY.

2 Press repeatedly to select FM1/FM2/FM3/MW/LW.

2 Press and hold number buttons 4 and 5 to enter crossover

3 Press S/T to search for a station.

select.

• To change the searching method for S/T: Press repeatedly.

The current crossover type appears.

AUTO1 : Automatically search for a station.

3 Turn the volume knob to select “2WAY” or “3WAY”, then

AUTO2 : Search for a preset station.

press the knob.

MANUAL : Manually search for a station.

4 Turn the volume knob to select “YES” or “NO”, then press

• To store a station: Press and hold one of the number buttons (1to6).

the knob.

• To select a stored station: Press one of the number buttons (1to6).

The selected crossover type appears.

• To cancel, press and hold

.

• To adjust the selected crossover settings,

( 17, 18)

.

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

Caution

2 Turn the volume knob to select an item

( 6)

, then press the knob.

Select a crossover type according to how the speakers are

3 Repeat step 2 until the desired item is selected/activated or follow the

connected.

( 26)

instructions stated on the selected item.

If you select a wrong type:

4 Press and hold to exit.

• The speakers may damage.

To return to the previous setting item, press .

• The output sound level may be extremely high or low.

ENGLISH

5

JS_KWD_KMM_BT203_EN_EN_1.indd 5JS_KWD_KMM_BT203_EN_EN_1.indd 5 9/30/2016 4:47:18 PM9/30/2016 4:47:18 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BLUETOOTH®

Default:

XX

CALL HISTORY

(Applicable only if the phone supports PBAP.)

MIC GAIN –10

to

+10

(

–4

):The sensitivity of the microphone increases as the

1

Press the volume knob to select a name or a phone number.

number increased.

• “I” indicates call received, “O” indicates call made, “M” indicates call

missed.

NR LEVEL –5

to

+5

(

0

):Adjust the noise reduction level until the least noise is

• Press

DISP

to change the display category (NUMBER or NAME).

being heard during a phone conversation.

• “NO DATA” appears if there is no recorded call history.

ECHO CANCEL –5

to

+5

(

0

):Adjust the echo cancellation delay time until the least

2

Press the volume knob to call.

echo is being heard during a phone conversation.

PHONE BOOK

(Applicable only if the phone supports PBAP.)

1

Turn the volume knob quickly to enter alphabet search mode (if the

Answer incoming call automatically

phonebook contains many contacts).

1

Press to enter Bluetooth mode.

The first menu (ABCDEFGHIJK) appears.

2 Turn the volume knob to select

[SETTINGS]

, then press the knob.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

*

), press

J / K

.

3 Turn the volume knob to select

[AUTO ANSWER]

, then press the knob.

• To select the desired first letter, turn the volume knob or press

4 Turn the volume knob to select an item, then press the knob.

S/T

, then press the knob.

1

to

30

(in seconds)/

OFF

(default)

Select “1” to search with numbers and select “

*

” to search with

5 Press and hold to exit.

symbols.

2

Turn the volume knob to select a name, then press the knob.

To return to the previous setting item, press .

3

Turn the volume knob to select a phone number, then press the knob

to call.

Make a call

•

The phonebook of the connected phone is automatically transferred to

the unit when pairing.

You can make a call from the call history, phonebook, or dialing the

•

Contacts are categorized as: HM (home), OF (office), MO (mobile), OT

number. Call by voice is also possible if your mobile phone has the

(other), GE (general)

feature.

•

This unit can display only non-accent letters. (Accent letters such as “Ú”

1 Press to enter Bluetooth mode.

is shown as “U”.)

“(First device name)” appears.

• If two Bluetooth phones are connected, press again to switch to

NUMBER DIAL

1

Turn the volume knob to select a number (0 to 9) or character

another phone.

(

, #, +).

“(Second device name)” appears.

2

Press

S/T

to move the entry position.

2 Turn the volume knob to select an item (see the following table),

Repeat steps

1

and

2

until you finish entering the phone number.

then press the knob.

3

Press the volume knob to call.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

12

ENGLISH

JS_KWD_KMM_BT203_EN_EN_1.indd 12JS_KWD_KMM_BT203_EN_EN_1.indd 12 9/30/2016 4:47:34 PM9/30/2016 4:47:34 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

VOICE

Speak the name of the contact you want to call or the voice command

Make a call from memory

to control the phone functions.

( Make a call using voice

1

Press to enter Bluetooth mode.

recognition)

2 Press one of the number buttons (1 to 6).

3 Press the volume knob to call.

BATT LOW

/

MID

/

FULL

*

:Shows the strength of the battery.

“NO MEMORY” appears if there is no contacts stored.

NO SIGNAL

/

LOW

/

MID

/

MAX

*

:Shows the strength of the current received signal.

*

Functionality depends on the type of the phone used.

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

Make a call using voice recognition

2 Turn the volume knob to select an item (see the following table),

1

Press and hold to activate the voice recognition of the

then press the knob.

connected phone.

3 Repeat step 2 until the desired item is selected/activated or follow

2 Speak the name of the contact you want to call or the voice

the instructions stated on the selected item.

command to control the phone functions.

4 Press and hold to exit.

• Supported Voice Recognition features vary for each phone. Refer to the

To return to the previous setting item, press .

instruction manual of the connected phone for details.

• This unit also supports the intelligent personal assistant function of

Default:

XX

iPhone.

BT MODE

Settings in memory

PHONE SELECT

Selects the phone or audio device to connect or disconnect.

“

*

” appears in front of the device name when connected.

Store a contact in memory

“

” appears in front of the current playback audio device.

AUDIO SELECT

You can store up to 6 contacts into the number buttons (1 to 6).

•

You can only connect a maximum of two Bluetooth phones and one

1 Press to enter Bluetooth mode.

Bluetooth audio device at any time.

2 Turn the volume knob to select

[CALL HISTORY]

,

[PHONE BOOK]

, or

DEVICE DELETE

1

Turn the volume knob to select a device to delete, then press the knob.

[NUMBER DIAL]

, then press the knob.

2

Turn the volume knob to select

[YES]

or

[NO]

, then press the knob.

3 Turn the volume knob to select a contact or enter a phone number.

PIN CODE EDIT

Changes the PIN code (up to 6 digits).

If a contact is selected, press the volume knob to show the phone

(0000)

1

Turn the volume knob to select a number.

number.

2

Press

S

/

T

to move the entry position.

4 Press and hold one of the number buttons (1 to 6).

Repeat steps

1

and

2

until you finish entering the PIN code.

“STORED” appears when the contact is stored.

3

Press the volume knob to confirm.

To erase a contact from the preset memory, select

[NUMBER DIAL]

in step 2

and store a blank number.

ENGLISH

13

JS_KWD_KMM_BT203_EN_EN_1.indd 13JS_KWD_KMM_BT203_EN_EN_1.indd 13 9/30/2016 4:47:35 PM9/30/2016 4:47:35 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

BLUETOOTH®

BLUETOOTH — Audio

RECONNECT ON

:The unit automatically reconnect when the last connected

Bluetooth device is within range.;

OFF

:Cancels.

While in BT AUDIO

AUTO PAIRING ON

:The unit automatically pair supported Bluetooth device

source, you can connect

(iPhone/iPod touch/Android device) when it is connected

to five Bluetooth audio

through USB input terminal.Depending on the operating

devices and switch

system of the connected device, this function may not work. ;

between these five

OFF

:Cancels.

devices.

INITIALIZE YES

:Initializes all the Bluetooth settings (including stored

pairing, phonebook, and etc.).;

NO

:Cancels.

Audio player via Bluetooth

1

Press repeatedly to select BTAUDIO.

2 Operate the Bluetooth audio player to start playback.

Bluetooth test mode

To On the faceplate

You can check the connectivity of the supported profile between

the Bluetooth device and the unit.

Playback/pause

Press

.

• Make sure there is no Bluetooth device paired.

Select group or folder

Press J / K.

1 Press and hold .

“PLEASE PAIR YOUR PHONE PIN 0000” appears.

Reverse/Forward skip

Press S/T.

2 Search and select this unit model name (KMM-BT20*) on

Reverse/Fast-forward

Press and hold S/T.

the Bluetooth device.

3 Operate the Bluetooth device to confirm pairing.

Repeat play Press

repeatedly.

“TESTING” flashes on the display.

ALL REPEAT

,

FILE REPEAT

,

REPEAT OFF

Random play Press and hold to select

ALL RANDOM

.

The connectivity result (OK or NG) appears after the test.

• Press

to select

RANDOM OFF

.

PAIRING: Pairing status

HF CNT: Hands-Free Profile (HFP) compatibility

Select a file from a folder/list Refer to “Select a file from a folder/list” on

AUD CNT: Advanced Audio Distribution Profile (A2DP)

page 8.

compatibility

Switch between connected

Press 5.

*

PB DL: Phonebook Access profile (PBAP) compatibility

Bluetooth audio devices

To cancel test mode, press and hold

to turn off the unit.

*

Pressing the “Play” key on the connected device itself also causes switching of sound output from the

device.

Operations and display indications may differ according to their availability on the

connected device.

14

ENGLISH

JS_KWD_KMM_BT203_EN_EN_1.indd 14JS_KWD_KMM_BT203_EN_EN_1.indd 14 9/30/2016 4:47:37 PM9/30/2016 4:47:37 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

Settings to use KENWOOD Remote application

STATUS

Shows the status of the selected device.

IOS CONNECTED

: You are able to use the application using the iPhone/

KENWOOD Remote application is designed to control the KENWOOD car

iPod connected via Bluetooth or USB input terminal.

receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input

IOS NOT CONNECTED

: No IOS device is connected to use the application.

terminal) or Android smartphone (via Bluetooth).

ANDROID CONNECTED

: You are able to use the application using the

Preparation:

Android smartphone connected via Bluetooth.

Install the latest version of KENWOOD Remote application on your device

ANDROID NOT CONNECTED

: No Android device is connected to use the

before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

application.

1 Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select an item (see the following table), then

press the knob.

Listen to iPhone/iPod via Bluetooth

3 Repeat step 2 until the desired item is selected or activated.

You can listen to the songs on the iPhone/iPod via Bluetooth on this

4 Press and hold to exit.

unit.

To return to the previous setting item, press .

Press

repeatedly to select iPodBT.

• You can operate the iPod/iPhone in the same way as iPod/iPhone

Default:

XX

via USB input terminal.

( 7)

REMOTE APP

• If you plug in an iPhone/iPod to the USB input terminal while

listening to iPodBT source, the source automatically change

SELECT

Select the device (IOS or ANDROID) to use the application.

to iPodUSB. Press

to select iPodBT if the device is still

IOS YES

:Selects iPhone/iPod to use the application via Bluetooth or connected via USB

connected via Bluetooth.

input terminal.;

NO

:Cancels.

If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is connected

via USB input terminal) to activate the application.

•

The connectivity of the application will be interrupted or disconnected if:

– You change from iPod BT source to any playback source connected via the USB

input terminal.

– You change from iPod USB source to iPod BT source.

ANDROID YES

:Selects Android smartphone to use the application via Bluetooth.;

NO

: Cancels.

ANDROID LIST

*:Selects the Android smartphone to use from the list.

*

Displayed only when

[ANDROID]

of

[SELECT]

is set to

[YES]

.

ENGLISH

15

JS_KWD_KMM_BT203_EN_EN_1.indd 15JS_KWD_KMM_BT203_EN_EN_1.indd 15 9/30/2016 4:47:38 PM9/30/2016 4:47:38 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

While listening to any source...

FADER

(Not applicable if 3-way crossover is selected.)

1 Press the volume knob to enter

[FUNCTION]

.

R15

to

F15

(

0

):Adjusts the rear and front speaker output balance.

2 Turn the volume knob to select an item (see the following table),

BALANCE L15

to

R15

(

0

):Adjusts the left and right speaker output balance.

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

VOLUME OFFSET –15

to

+6

(

0

):Preset the initial volume level of each source. (Before

4 Press and hold to exit.

adjustment, select the source you want to adjust.)

To return to the previous setting item, press .

SOUND EFFECT

Default:

XX

SOUND RECNSTR

(Not applicable for TUNER source and AUX source.)

AUDIO CONTROL

(Sound

ON

:Creates realistic sound by compensating the high-frequency

reconstruction)

components and restoring the rise-time of the waveform that are lost

SUB-W LEVEL

LEVEL –50

to

LEVEL +10

(

LEVEL 0

): Adjusts the subwoofer output level.

in audio data compression.;

OFF

:Cancels.

MANUAL EQ

The sound elements (frequency level, tone level, Q factor) are preset into

SPACE ENHANCE

(Not applicable for TUNER source.)

each selection (

BAND1 LEVEL

to

BAND13 LEVEL

).

SML

/

MED

/

LRG

:Virtually enhances the sound space.;

OFF

:Cancels.

BAND1 LEVEL

SND REALIZER LV1

/

LV2

/

LV3

:Virtually makes the sound more realistic.;

LEVEL

LEVEL–9

to

LEVEL +9

(

LEVEL 0

):Adjusts the level to memorize for

OFF

:Cancels.

each source. (Before making an adjustment, select the source you want

STAGE EQ LOW

/

MID

/

HI

:Virtually adjust the sound position heard from the

to adjust.)

speakers.;

OFF

:Cancels.

BASS EXTEND ON

:Turns on the extended bass.;

OFF

:Cancels.

DRIVE EQ ON

: Boosts the frequency to reduce the noise heard from outside the

BAND2 LEVEL

to

LEVEL–9

to

LEVEL +9

(

LEVEL 0

):Adjusts the level to memorize for

car or running noise of the tyres.;

OFF

:Cancels.

BAND13 LEVEL

each source. (Before making an adjustment, select the source you want

SPEAKER SIZE

Depending on the crossover type you have selected

( 5)

, 2-way

to adjust.)

crossover or 3-way crossover setting items will be shown.

( 17,18)

Q FACTOR 1.35

/

1.50

/

2.00

:Adjust the quality factor.

X’OVER

By default, 2-way crossover type is selected.

PRESET EQ NATURAL

/

ROCK

/

POPS

/

EASY

/

TOP40

/

JAZZ

/

POWERFUL

/

USER

: Selects

DTA SETTINGS

a preset equalizer suitable to the music genre. (Select

[USER]

to use the

For settings,

18, 19, Digital Time Alignment settings

.

CAR SETTINGS

settings made in

[MANUAL EQ]

.)

BASS BOOST LV1

/

LV2

/

LV3

/

LV4

/

LV5

:Selects your preferred bass boost level.;

• For 2-way crossover:

[SUB-W LEVEL]

/

[SUBWOOFER SET]

is selectable only if

OFF

:Cancels.

[SWITCH PREOUT]

is set to

[SUB-W]

.

( 4)

•

[SUB-W LEVEL]

is selectable only if

[SUBWOOFER SET]

is set to

[ON]

.

LOUDNESS LV1

/

LV2

:Selects your preferred low and high frequencies boost to

produce a well-balanced sound at a low volume level.;

OFF

:Cancels.

SUBWOOFER SET ON

:Turns on the subwoofer output.;

OFF

:Cancels.

16

ENGLISH

JS_KWD_KMM_BT203_EN_EN_1.indd 16JS_KWD_KMM_BT203_EN_EN_1.indd 16 9/30/2016 4:47:39 PM9/30/2016 4:47:39 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

Crossover settings

2-way crossover setting items

Below are the available setting items for 2-way crossover

SPEAKER SIZE

and 3-way crossover.

FRONT SIZE

8CM

/

10CM

/

12CM

/

13CM

/

16CM

/

17CM

/

18CM

/

4×6

/

5×7

/

6×8

/

6×9

/

7×10

SPEAKER SIZE

Selects according to the connected speaker size for

TWEETER

SMALL

/

MIDDLE

/

LARGE

/

NONE

(not connected)

optimum performance.

REAR 8CM

/

10CM

/

12CM

/

13CM

/

16CM

/

17CM

/

18CM

/

4×6

/

5×7

/

6×8

/

6×9

/

7×10

/

NONE

•

The frequency and slope settings are automatically set

(not connected)

for the crossover of the selected speaker.

1

•

When 2-way crossover is selected, if

[NONE]

is selected

SUBWOOFER

*

16CM

/

20CM

/

25CM

/

30CM

/

38CM OVER

/

NONE

(not connected)

for

[TWEETER]

of

[FRONT]

,

[REAR]

and

[SUBWOOFER]

for

X ' OVER

[SPEAKER SIZE]

, the

[X ‘ OVER]

setting of the speaker is not

available.

TWEETER FRQ

1KHZ

/

1.6KHZ

/

2.5KHZ

/

4KHZ

/

5KHZ

/

6.3KHZ

/

8KHZ

/

10KHZ

/

12.5KHZ

• When 3-way crossover is selected, if

[NONE]

is selected

GAIN LEFT

–8

to

0

for

[WOOFER]

of

[SPEAKER SIZE]

, the

[X’OVER]

setting of

GAIN RIGHT

–8

to

0

[WOOFER]

is not available.

FRONT HPF F - HPF FRQ

30HZ

/

40HZ

/

50HZ

/

60HZ

/

70HZ

/

80HZ

/

90HZ

/

100HZ

/

120HZ

/

150HZ

/

X ‘ OVER

180HZ

/

220HZ

/

250HZ/THROUGH

• [FRQ]

/

[F - HPF FRQ]

/

[R - HPF FRQ]

/

[SW LPF FRQ]

/

[HPF FRQ]

/

F - HPF SLOPE

–6DB

/

–12DB

/

–18DB

/

–24DB

[LPF FRQ]

: Adjusts the crossover frequency for the

selected speakers (high pass filter or low pass filter).

F - HPF GAIN

–8

to

0

If

[THROUGH]

is selected, all signals are sent to the

REAR HPF R - HPF FRQ

selected speakers.

•

[F - HPF SLOPE]

/

[R - HPF SLOPE]

/

[SW LPF SLOPE]

/

[HPF SLOPE]

/

R - HPF SLOPE

(Refer

FRONT HPF

settings above.)

[LPF SLOPE]

/

[SLOPE]:

Adjusts the crossover slope.

R - HPF GAIN

Selectable only if a setting other than

[THROUGH]

is

SUBWOOFER

SW LPF FRQ 30HZ

/

40HZ

/

50HZ

/

60HZ

/

70HZ

/

80HZ

/

90HZ

/

100HZ

/

120HZ

/

150HZ

/

selected for the crossover frequency.

LPF

*

1

180HZ

/

220HZ

/

250HZ

/

THROUGH

• [SW LPF PHASE]

/

[PHASE]:

Selects the phase of the speaker

output to be in line with the other speaker output.

SW LPF SLOPE

–6DB

/

–12DB

/

–18DB

/

–24DB

• [GAIN LEFT]

/

[GAIN RIGHT]

/

[F - HPF GAIN]

/

[R - HPF GAIN]

/

SW LPF PHASE

REVERSE

(180°)/

NORMAL

(0°)

[SW LPF GAIN]

/

[GAIN]

:

Adjusts the output volume of the

SW LPF GAIN –8

to

0

selected speaker.

*

1

Selectable only when

[SWITCH PREOUT]

is set to

[SUB-W]

( 4)

and

[SUBWOOFER SET]

is set to

[ON]

.

( 16)

ENGLISH

17

JS_KWD_KMM_BT203_EN_EN_1.indd 17JS_KWD_KMM_BT203_EN_EN_1.indd 17 9/30/2016 4:47:41 PM9/30/2016 4:47:41 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

3-way crossover setting items

Digital Time Alignment settings

SPEAKER SIZE

Digital Time Alignment sets the delay time of the speaker output to

create a more suitable environment for your vehicle.

TWEETER

SMALL

/

MIDDLE

/

LARGE

• For more information,

19, Determining the value for [DISTANCE] and [GAIN]

MID RANGE

8CM

/

10CM

/

12CM

/

13CM

/

16CM

/

17CM

/

18CM

/

4×6

/

5×7

/

6×8

/

6×9

of [DTA SETTINGS].

WOOFER

*

2

16CM

/

20CM

/

25CM

/

30CM

/

38CM OVER

/

NONE

(not connected)

X ' OVER

DTA SETTINGS

TWEETER

HPF FRQ

1KHZ

/

1.6KHZ

/

2.5KHZ

/

4KHZ

/

5KHZ

/

6.3KHZ

/

8KHZ

/

POSITION

Selects your listening position (reference point).

10KHZ

/

12.5KHZ

ALL

:Not compensating;

FRONT RIGHT:

Front right seat;

FRONT LEFT

:Front left seat;

FRONT ALL

:Front seat

SLOPE

–6DB

/

–12DB

•

[FRONT ALL]

is displayed only when

[2-WAY X’OVER]

is selected.

PHASE

REVERSE

(180°)/

NORMAL

(0°)

(

5)

GAIN –8

to

0

DISTANCE 0CM

to

610CM

:Fine adjust the distance to compensate. (Before

making an adjustment, select the speaker you want to adjust.)

MID RANGE

HPF FRQ

30HZ

/

40HZ

/

50HZ

/

60HZ

/

70HZ

/

80HZ

/

90HZ

/

100HZ

/

120HZ

/

150HZ

/

180HZ

/

220HZ

/

250HZ

/

THROUGH

GAIN –8DB

to

0DB

:Fine adjust the output volume of the selected speaker.

(Before making an adjustment, select the speaker you want to adjust.)

HPF SLOPE

–6DB

/

–12DB

DTA RESET YES

:Resets the settings (

[DISTANCE]

and

[GAIN]

) of the selected

LPF FRQ

1KHZ

/

1.6KHZ

/

2.5KHZ

/

4KHZ

/

5KHZ

/

6.3KHZ

/

8KHZ

/

[POSITION]

to default.;

NO

:Cancels.

10KHZ

/

12.5KHZ

/

THROUGH

CAR SETTINGS

Identify your car type and rear speaker location in order to make the

LPF SLOPE

–6DB

/

–12DB

adjustment for

[DTA SETTINGS]

.

PHASE

REVERSE

(180°)/

NORMAL

(0°)

CAR TYPE COMPACT

/

FULL SIZE CAR

/

WAGON

/

MINIVAN

/

SUV

/

GAIN –8

to

0

MINIVAN(LONG)

:Selects the type of vehicle.;

OFF:

Not

compensating.

WOOFER

*

2

LPF FRQ 30HZ

/

40HZ

/

50HZ

/

60HZ

/

70HZ

/

80HZ

/

90HZ

/

100HZ

/

120HZ

/

150HZ

/

180HZ

/

220HZ

/

250HZ

/

THROUGH

R-SP LOCATION

Selects the location of the rear speakers in your vehicle to calculate the

furthest distance from the listening position selected (reference point).

SLOPE

–6DB

/

–12DB

•

DOOR

/

REAR DECK

:Selectable only when

[CAR TYPE]

is selected as

PHASE

REVERSE

(180°)/

NORMAL

(0°)

[OFF]

,

[COMPACT]

,

[FULL SIZE CAR]

,

[WAGON]

or

[SUV]

.

•

2ND ROW

/

3RD ROW

:Selectable only when

[CAR TYPE]

is selected

GAIN –8

to

0

as

[MINIVAN]

or

[MINIVAN(LONG)]

.

*

2

Selectable only when

[SUBWOOFER SET]

is set to

[ON]

.

( 16)

18

ENGLISH

JS_KWD_KMM_BT203_EN_EN_1.indd 18JS_KWD_KMM_BT203_EN_EN_1.indd 18 9/30/2016 4:47:42 PM9/30/2016 4:47:42 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

DISPLAY SETTINGS

•

Before making an adjustment for

[DISTANCE]

and

[GAIN]

of

[DTA SETTINGS]

, select the speaker you

Set the dimmer

want to adjust:

When 2-way crossover is selected:

Press and hold DISP (DIMMER) to turn on or off the dimmer.

FRONT LEFT

/

FRONT RIGHT

/

REAR LEFT

/

REAR RIGHT

/

SUBWOOFER

• If you have set

[DIMMER TIME]

, it will be canceled once you

– You can only select

[REAR LEFT]

,

[REAR RIGHT]

and

[SUBWOOFER]

if a setting other than

[NONE]

is

press and hold this button.

selected for

[REAR]

and

[SUBWOOFER]

of

[SPEAKER SIZE]

.

( 17)

Other settings

When 3-way crossover is selected:

TWEETER LEFT

/

TWEETER RIGHT

/

MID LEFT

/

MID RIGHT

/

WOOFER

1

Press the volume knob to enter

[FUNCTION]

.

– You can only select

[WOOFER]

if a setting other than

[NONE]

is selected for

[WOOFER]

of

2 Turn the volume knob to select an item (see the

[SPEAKER SIZE]

.

( 18)

following table), then press the knob.

3 Repeat step 2 until the desired item is selected/activated

•

[R-SP LOCATION]

of

[CAR SETTINGS]

is selectable only if:

or follow the instructions stated on the selected item.

– 2-way crossover is selected.

( 5)

4 Press and hold to exit.

– A setting other than

[NONE]

is selected for

[REAR]

of

[SPEAKER SIZE]

.

( 17)

To return to the previous setting item, press .

Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]

Default:

XX

If you specify the distance from the center of the currently

set listening position to every speaker, the delay time will be

DISPLAY

automatically computed and set.

DIMMER

Dim the display illumination.

1

Determine the center of the currently set listening position

ON

:Dimmer is turned on.;

OFF

:Cancels.

as the reference point.

DIMMER TIME

:Set the dimmer on and off time.

2

Measure the distances from the reference point to the

1

Turn the volume knob to adjust the

[ON]

time, then press

speakers.

the knob.

3

Calculate the differences between the distance of the

2

Turn the volume knob to adjust the

[OFF]

time, then press

furthest speaker (rear speaker) and other speakers.

the knob.

4

Set the

[DISTANCE]

calculated in step

3

for individual

(Default:

[ON]

:

18:00

;

[OFF]

:

6:00

)

speakers.

5

Adjust

[GAIN]

for individual speakers.

BRIGHTNESS 0

to

31

: Select your preferred brightness level for display

Example: When

[FRONT ALL]

is selected as the listening

illumination.

position

TEXT SCROLL AUTO

/

ONCE

:Select whether to scroll the display information

automatically, or scroll only once.;

OFF

:Cancels.

ENGLISH

19

JS_KWD_KMM_BT203_EN_EN_1.indd 19JS_KWD_KMM_BT203_EN_EN_1.indd 19 9/30/2016 4:47:43 PM9/30/2016 4:47:43 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)

TROUBLESHOOTING

Symptom Remedy

Symptom Remedy

Sound cannot be heard.

•

Adjust the volume to the optimum level.

“READ ERROR” Copy the files and folders onto the USB device again. If this

•

Check the cords and connections.

does not solve the problem, reset the USB device or use

another USB device.

“MISWIRING CHECK WIRING

Turn the power off, then check to be sure the

THEN PWR ON” appears.

terminals of the speaker wires are insulated properly.

“NO DEVICE” Connect a USB device, and change the source to USB again.

Turn the power on again.

“COPY PRO” A copy-protected file is played.

“PROTECTING SEND SERVICE”

Send the unit to the nearest service center.

“UNSUPPORTED DEVICE”

•

Check whether the connected device is compatible with

General

appears.

appears.

this unit and ensure the file systems are in supported

•

Sound cannot be heard.

Clean the connectors.

( 22)

formats.

( 22)

•

The unit does not turn on.

•

Reattach the device.

•

Information shown on the

USB/iPod

“UNRESPONSIVE DEVICE”

Make sure the device is not malfunction and reattach the

display is incorrect.

appears

device.

The unit does not work at all. Reset the unit.

( 3)

“USB HUB IS NOT

This unit cannot support a USB device connected via a

•

Radio reception is poor.

Connect the antenna firmly.

SUPPORTED” appears.

USB hub.

•

Static noise while listening

Radio

“NO MUSIC” Connect a USB device that contains playable audio files.

to the radio.

“iPod ERROR”

•

Reconnect the iPod.

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

•

Reset the iPod.

Elapsed playing time is not

This is caused by how the files are recorded.

•

Sound cannot be heard

•

Reconnect the Android device.

correct.

during playback.

•

If in

[HAND MODE]

, launch any media player

“LOADING” appears when you

This unit is still preparing the iPod/iPhone music list.

•

Sound output only

application on the Android device and start playback.

enter search mode by pressing

It may take some time to load, try again later.

from the Android

•

If in

[HAND MODE]

, relaunch the current media player

.

device.

application or use another media player application.

ANDROID

•

Restart the Android device.

Correct characters are not

•

This unit can only display uppercase letters,

USB/iPod

•

If this does not solve the problem, the connected

displayed (e.g. album name).

numbers, and a limited number of symbols.

Android device is unable to route the audio signal to

•

Depending on the display language you have

unit.

( 22)

selected

( 5)

, some characters may not be

displayed correctly.

“NA FILE” Make sure the media contains supported audio files.

( 22)

20

ENGLISH

JS_KWD_KMM_BT203_EN_EN_1.indd 20JS_KWD_KMM_BT203_EN_EN_1.indd 20 9/30/2016 4:47:46 PM9/30/2016 4:47:46 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

TROUBLESHOOTING

Symptom Remedy

Symptom Remedy

Cannot playback at

•

Make sure KENWOOD MUSIC PLAY APP is installed on the

Voice calling method is

•

Use voice calling method in a more quiet environment.

[BROWSE MODE]

.

Android device.

( 7)

not successful.

•

Reduce the distance from the microphone when you

•

Reconnect the Android device and select the appropriate

speak the name.

control mode.

•

Make sure the same voice as the registered voice tag is

•

If this does not solve the problem, the connected Android

used.

device does not support

[BROWSE MODE]

.

( 22)

Sound is being

•

Reduce the distance between the unit and the Bluetooth

“NO DEVICE” or

•

Switch off the developer options on the Android device.

interrupted or skipped

audio player.

“READING” keeps

•

Reconnect the Android device.

during playback of a

•

Turn off, then turn on the unit and try to connect again.

ANDROID

flashing.

•

If this does not solve the problem, the connected Android

Bluetooth audio player.

•

Other Bluetooth devices might be trying to connect to the

device does not support

[BROWSE MODE]

.

( 22)

unit.

Playback is intermittent

Turn off the power saving mode on the Android device.

The connected Bluetooth

•

Check whether the connected Bluetooth audio player

or sound skips.

audio player cannot be

supports Audio/Video Remote Control Profile (AVRCP).

controlled.

(Refer to the instructions of your audio player.)

“ANDROID ERROR”/

•

Reconnect the Android device.

•

Disconnect and connect the Bluetooth player again.

“NADEVICE”

•

Restart the Android device.

“DEVICE FULL” The number of registered devices has reached its limit.

No Bluetooth device is

•

Search from the Bluetooth device again.

Retry after deleting an unnecessary device.

( 13,

detected.

•

Reset the unit.

( 3)

Bluetooth®

DEVICE DELETE)

Bluetooth pairing

•

Make sure you have entered the same PIN code to both

“N/A VOICE TAG” Make sure the same voice as the registered voice tag is

cannot be made.

the unit and Bluetooth device.

used.

•

Delete pairing information from both the unit and the

Bluetooth device, then perform pairing again.

( 10)

“NOT SUPPORT” The connected phone does not support Voice Recognition

feature or phonebook transfer.

Echo or noise is heard

•

Adjust the microphone unit’s position.

( 10)

Bluetooth®

during a phone

•

Check the

[ECHO CANCEL]

setting.

( 12)

“NO ENTRY”/“NO PAIR” There is no registered device connected/found via

conversation.

Bluetooth.

Phone sound quality

•

Reduce the distance between the unit and the Bluetooth

“ERROR” Try the operation again. If “ERROR” appears again, check if

is poor.

device.

the device supports the function you have tried.

•

Move the car to a place where you can get a better signal

“NO INFO”/“NO DATA” Bluetooth device cannot get the contact information.

reception.

“HF ERROR XX”/

Reset the unit and try the operation again. If this does not

“BT ERROR”

solve the problem, consult your nearest service center.

ENGLISH

21

JS_KWD_KMM_BT203_EN_EN_1.indd 21JS_KWD_KMM_BT203_EN_EN_1.indd 21 9/30/2016 4:47:48 PM9/30/2016 4:47:48 PM

Book Size: B6L (182 mm x 128 mm)

Data Size: B6L (182 mm x 128 mm)