Indesit K6 C51/R: Routine Maintenance and Cleaning

Routine Maintenance and Cleaning

Disconnect the oven from the source of electricity

before performing any maintenance or cleaning. To

Glass ceramic hob cleaners Available from

ensure a long life for your oven, clean it frequently and

carefully, keeping in mind that:

Window scraper Razor blade

DIY Stores

scrapers

· Do not use steam equipment to clean the appliance.

· the enamelled parts and the self-cleaning panels

Replacement blades DIY Stores,

should be washed with warm water without the addition

supermarkets,

of abrasive powders or corrosive substances which

chemists

could damage the finish;

COLLO luneta

Boots, Co-op stores,

· stainless steel may become marked if it comes into

HOB BRITE

department stores, Regional

contact with very hard water or harsh detergents

Hob Clean

Electricity Company shops,

(containing phosphorous) for long periods of time. After

SWISSCLEANER

supermarkets

cleaning, it is advisable to rinse thoroughly and dry. It

is also recommended to dry any water drops;

Replacing the Oven Lamp

· avoid dirt and grease accumulating on the control panel

by cleaning it frequently. Use non-abrasive sponges or

• Disconnect the oven from the power supply by means

soft cloths to avoid scratching enamelled or shiny steel

of the omnipolar switch used to connect the appliance

parts.

to the electrical mains; or disconnect the plug if it is

accessible.

Cleaning the hob surface

• Remove the glass cover of the lamp-holder.

Prior to cooking, the hob surface should always be cleaned

• Remove the lamp and replace it with a lamp resistant

using a damp cloth to remove any dust or stray food

particles. The hob surface should be regularly cleaned

to high temperatures (300°C) with the following speci-

with a lukewarm solution of water and a mild detergent.

fications:

Periodically it may be necessary to use a proprietary

- Voltage: 230V

ceramic hob cleaner. First remove all spilt food and fat

- Wattage: 25W

with a window scrape, preferably the razor blade type

- Socket: E14

(not supplied) or, failing that, the fixed blade

• Replace the glass cover and connect the oven to the

razor edge type (see Fig. A). Then clean the hob while it

mains.

is still warm to the touch with a suitable cleaner and paper

towel.

Then rinse it and wipe it dry with a clean cloth .If aluminium

foil or plastic items are accidentally allowed to melt on the

hob surface they should be immediately removed from

the hot cooking area with a scraper. This will avoid any

possible damage to the surface. This also applies to sugar

or any food with a high sugar content.

Do not use abrasive sponges or scourers of any type.

Corrosive cleaners such as oven sprays and stain

removers should also not be used (see Fig. B).

Fig. A Fig. B

34