Indesit IWSD 4105: Description of the washing machine and starting a wash cycle

Description of the washing machine and starting a wash cycle: Indesit IWSD 4105

Description of the washing machine

and starting a wash cycle

Control panel

GB

WASH CYCLE

DELAY TIMER

PROGRESS

button

START/

DISPLAY

FUNCTION

ON/OFF

button

PAUSE

buttons with

indicator lights

button with

indicator light

TEMPERATURE

knob

DOOR LOCKED

Detergent dispenser drawer

indicator light

WASH CYCLE

SPIN SPEED

knob

knob

Detergent dispenser drawer: used to dispense

WASH CYCLE PROGRESS

indicator light

s: used to

detergents and washing additives (see Detergents

monitor the progress of the wash cycle.

and laundry).

The illuminated indicator light shows which phase is in

progress.

ON/OFF button: switches the washing machine on

and off.

DOOR LOCKED indicator light: indicates whether

the door may be opened or not (see next page).

WASH CYCLE knob: programmes the wash cycles.

During the wash cycle, the knob does not move.

START/PAUSE button with indicator light: starts or

temporarily interrupts the wash cycles.

FUNCTION buttons with indicator light: used to

N.B. To pause the wash cycle in progress, press this

select the available functions. The indicator light

button; the corresponding indicator light will flash

corresponding to the selected function will remain lit.

orange, while the indicator light for the current wash

cycle phase will remain lit in a fixed manner. If the

TEMPERATURE knob: sets the temperature or the

DOOR LOCKED indicator light is switched off, the

cold wash cycle (see Personalisation).

door may be opened.

To start the wash cycle from the point at which it was

SPIN SPEED knob: sets the spin speed or exclude

interrupted, press this button again.

the spin cycle completely (see Personalisation).

Standby mode

DISPLAY: used to view the duration of the various

This washing machine, in compliance with new

cycles available and the remaining time of a cycle in

energy saving regulations, is fitted with an automatic

progress; if the DELAY TIMER option has been

standby system which is enabled after about 30

selected, the countdown to the start of the selected

minutes if no activity is detected. Press the ON-OFF

cycle will appear.

button briefly and wait for the machine to start up

again.

DELAY TMER button : press to set a delayed start

time for the selected wash cycle. The delay time will

be shown on the display.

4

Indicator lights

Door locked indicator light

GB

When the indicator light is on, the porthole door is

The indicator lights provide important information.

locked to prevent it from being opened; make sure

This is what they can tell you:

the indicator light is off before opening the door (wait

approximately 3 minutes). To open the door during a

Wash cycle phase indicator lights

running wash cycle, press the START/PAUSE button;

Once the desired wash cycle has been selected and

the door may be opened once the DOOR LOCKED

has begun, the indicator lights switch on one by one

indicator light turns off.

to indicate which phase of the cycle is currently in

progress.

Wash

Rinse

Spin

Drain

End of wash cycle

Function buttons and corresponding indicator

lights

When a function is selected, the corresponding

indicator light will illuminate.

If the selected function is not compatible with the

programmed wash cycle, the corresponding indicator

light will flash and the function will not be activated.

If the selected function is not compatible with another

function which has been selected previously, the

indicator light corresponding to the first function

selected will flash and only the second function will be

activated; the indicator light corresponding to the

enabled option will remain lit.

Starting a wash cycle

1. Switch the washing machine on by pressing the ON/OFF button. All indicator lights will switch on for a few

seconds, then they will switch off and the START/PAUSE indicator light will pulse.

2. Load the laundry and close the door.

3. Set the WASH CYCLE knob to the desired programme.

4. Set the washing temperature (see Personalisation).

5. Set the spin speed (see Personalisation).

6. Measure out the detergent and washing additives (see Detergents and laundry).

7. Select the desired functions.

8. Start the wash cycle by pressing the START/PAUSE button and the corresponding indicator light will remain lit

in a fixed manner, in green.

To cancel the set wash cycle, pause the machine by pressing the START/PAUSE button and select a new cycle.

9. At the end of the wash cycle the

indicator light will switch on. The door can be opened once the DOOR

LOCK indicator light turns off. Take out your laundry and leave the appliance door ajar to make sure the drum

dries completely. Switch the washing machine off by pressing the ON/OFF button.

5

Оглавление